Dwyer Instruments SERIES PV Catalog Page

Series

GROUND T

ERMINAL

DIN CONNECTOR

Solenoid Pilot Valve

Low Cost, Compact Design, For Use with SAV Angle Seat Valves

SPECIFICATIONS Pilot Media: Air, water, or inert gases.

ower Requirements: See model chart.

etted Materials: Body: Niploy coated brass; Seal: FKM.

aximum Supply Pressure: 150 psig (10.3 bar).

emperature Limits: 14 to 140°F (-10 to 60°C).

T Actuator Connection: PV1_: 1/8˝ BSP; PV2_, PV3_: 1/4˝ BSP. Pilot Media Connection: 1/8˝ NPT. Coil Consumption: PV1_, PV2_: AC: 9A (res.), 14A (ind.); DC: 6A; PV3_: AC: 15A

res.), 30A (ind.); DC: 10A.

(

ounting: Banjo connection.

nclosure Rating: IP65 (with DIN connector).

E Standard Features: Manual override, DIN connector.

VALVES

The Series PV three-way normally closed electro-pneumatic solenoid pilot valve

can be direct mounted to operate the Series SAV Angle Seat Valve actuators. When the solenoid valve receives the electric input signal, it switches the pneumatic supply pressure to the actuator, which moves the valve from the closed to open position, or reversely for normally open valves. When the input to the solenoid valve stops, the pneumatic supply pressure is again blocked, and the valve returns to the normal position. Suitable for use with air or other inert gases, the valve is supplied with a DIN connector, and is fitted with a manual override. Water can also be used as a pilot media provided that a suitable drain line is attached to the exhaust outlet. Select the proper model according to the SAV valve actuator diameter and power requirements.

S Actuator

Voltage

Model

240 VAC

PV11

120 VAC

PV12

24 VAC

PV13 P P PV22 PV23 PV24 PV31 PV32 PV33 PV34

4 VDC

V14

40 VAC

V21

120 VAC 24 VAC 24 VDC 240 VAC 120 VAC 24 VAC 24 VDC

USA: California Proposition 65 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Diameter

-3/4˝

2-1/2˝

3-9/16˝

A (mm)

1-1/4 (31.8)

1-3/8 (35.0)

Dimensions

B (mm)

3-1/32 (77.0)

3-1/16 (77.8)

3-3/4 (95.3)

C (mm)

1-1/16 (27.0)