Dwyer Instruments LPTK Data sheet

Series

2-17/32

[64.5]

6-9/64

[156]

4-1/64

[102]

8-17/64

[210]

9-29/64

[240]

12-31/64

[317]

PLACE OF

ADAPTOR

PLACE OF

GAGE

Ø2-5/8

[Ø66.7]

35/64 SQUARE

[13.8 SQUARE]

H33/64

[H13]

1-9/16

[39.6]

LPTK

Gas Pressure Test Kit

Convenient Kit Perfect For Testing LP and Natural Gas Controls

TEST EQUIPMENT

Closed Open

The Model LPTK Gas Pressure Test Kit is ideal for testing LP and natural gas lines and controls. The kit’s gage shows if proper pressure is present or if a leak exists. The LPTK Gas Pressure Test Kit is available in two different gage ranges, and each gage is 3% full-scale accurate with an easy to use calibration screw on the back of the gage. It is easier to use than a manometer, and includes a sturdy case for added durability and safe handling.

Model LPTK-01 LPTK-02 LPTK-03 LPTK-04

*Consult factory for other range options.

Range

0 to 15 in w.c. & 0 to 8.6 oz/in 0 to 32 in w.c. & 0 to 18.5 oz/in 0 to 4 kPa & 0 to 40 mbar 0 to 8 kPa & 0 to 80 mbar

Gage & Hose Adaptor

SPECIFICATIONS Service: Compatible gases. Wetted Materials: Gage: brass, hose: rubber. Housing Materials: Steel with black finish. Lens: Polycarbonate. Accuracy: ±3% full-scale. Pressure Limit: 110% of range. Temperature Limits: -40 to 150ºF (-40 to 65ºC). Size: 2-1/2˝ (63 mm). Process Connections: 1/8˝ NPT, brass hose barb. Case: ABS plastic. Hose: Rubber, 36˝ (91.4 cm). Tube Nipple: Rubber. Weight: 1.75 lb (0.8 kg).

Gas Analyzers/Kits