Series
6-19/64
[160.00]
1/8˝
N
PT
1-31/32
[50.00]
19/32
[
15.00]
Ø
5/16
[Ø8.00]
15/16
[
24.00]
2-9/16
[65.00]
1
9/32
[15.00]
1/8˝
NPT
5-9/32
[134.00]
8-5/64
[205.00]
7
-11/64
[182.00]
1-37/64
[40.00]
7-7/8
[
200.00]
6
-19/64
[160.00]
5
-23/64
[136.00]
INCHES OF WATER
MAX. PRESSURE 15 PSIG
0
.20
.40
.
60
.
80
1.0
AT2
2000
®
ATEX Approved Series 2000 Magnehelic
PRESSURE
Differential Pressure Gage
Magnehelic®Gage in Flame-Proof ATEX Enclosure
Differential Pressure Gages
The popular Magnehelic®Differential Pressure Gage is now available in a flameproof ATEX enclosure with the new ATEX approved AT22000 Series. This gage can
indicate positive, neg ative or dif ferential pressures and is accurate wit hin 2%. The
M
resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with
bubbler systems and pressures in fluid amplifier or fluidic systems. Optional gage
construction is available for use to either 35 psig (2.42 bar) or 80 psig (5.51 bar). Flameproof ATEX enclosures are available in aluminum and include a glass window for viewing
process pressures status on gage face.
Important notes for installation:
• Cables must be fitted through 1/2˝ NPT cable gland or ATEX conduit (not supplied
• Make sure after cabling to close tight cover and cable gland, in order to keep IP66
• Open cover only after de-energizing instrument.
• Attention: Check local safety rules and warnings on unit and manual for a correct
RANGE CHART
Model
2000-00N
2000-00
2000-0
2001
2002
2003
2004
2005
2006
2008
2010
2012
2015
2020
2025
2030
2040
2050
2060
2080
2100
2120
2150
2160
8
®
agnehelic
with instrument).
rating (IP65 with option OPV, overpressure relief valve).
use of the instrument in hazardous area.
age is the industry standard to measure fan and blower pressures, filter
g
Range
in w.c.
.05 to 0 to .2
0 to .25
0 to .50
0 to 1.0
0 to 2.0
0 to 3.0
0 to 4.0
0 to 5.0
0 to 6.0
0 to 8.0
0 to 10
0 to 12
0 to 15
0 to 20
0 to 25
0 to 30
0 to 40
0 to 50
0 to 60
0 to 80
0 to 100
0 to 120
0 to 150
0 to 160
DWYER INSTRUMENTS, INC. | www.dwyer-inst.com
Example
Housing
Range
Pressure
Rating
Temperature
Rating
Housing
Material
Cover
Process
Connection
Overpressure
Plug
Tag
AT2
AT2
2001
2XXX
X
-X
-MP
-HP
X
X
LT
A
-A
O
O
1
1
2
X
X
OPV
T2
T2
SPECIFICATIONS
Service: Air and non-combustible, compatible gases.
Wetted Materials: Consult factory.
Magnehelic
Exterior finish is coated gray to withstand 168 hour salt spray corrosion test.
Housing Material: Aluminum.
Finishing: Texture epoxy coat RAL7038.
Accuracy: ±2% of FS (±3% on -0, -100 Pa, -125 Pa, -10 mm and ±4% on -00, -60
Pa, -6 mm ranges), throughout range at 70°F (21.1°C).
Pressure Limits: -20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option; 35 psig
(2.41 bar), HP option; 80 psig (5.52 bar).
Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard
gages only.
Temperature Limits: 20 to 140°F (-6.67 to 60°C); Low temperature option: -20°F
(-28.8°C); Case: -76 to 140°F (-60 to 60°C) (Note: Product temperature limits are
less than case limits).
Mounting Orientation: Diaphragm in vertical position.
Enclosure Rating: IP66. IP65 with option OPV, overpressure relief valve.
Process Connections: 1/8˝ NPT female brass (SS optional). In presence of
acetylene it is necessary to use SS.
Weight: 8.6 lb (3.9 kg).
ATEX Approved Product from Comhas with ECN: BVI 14ATEX0072.
Agency Approvals: CE 1370 II2 GD Ex d IIC Gb T6; -60°C ≤ Ta ≤ +60°C Ex tb
IIIC Db T 85°C.
AT22001-XX-A01XT2
ATEX Approved Series 2000 Magnehelic
Specify range by using Magnehelic
Standard from -20 in Hg to 15 psig static pressure
Medium pressure-max. static 35 psig
High pressure-max. static 80 psig
Standard temperature limits -6.67 to 60°C
Low temperature limit to -28.8°C
Aluminum
Glass cover
1/8˝ NPT female brass ports
1/8˝ NPT female SS ports
Standard without overpressure relief valve
Overpressure relief valve
Material same as ports
SS information label
®
Housing: Die cast aluminum case & bezel with acrylic cover;
u
®
Differential Pressure Gage
®
model number. See Ranger Chart
uOver Protection Note: See page 5 (Series 2000)