Dwyer Instruments ACCESSORIES Catalog Page
ACCESSORIES - MISCELLANEOUS
A-351 A-352 A-353 A-354 A-356
A-357 A-363 A-364 A-366 A-397
A-464 A-465 A-362 A-368 A-369
A-370 A-371 A-395 A-497 A-300
A-360
MODEL CHART
Model Description
A-298
Flat aluminum bracket for ush mounting Capsuhelic
605, and 3000MR
A-299
Mounting bracket, ush mount Magnehelic® gage in bracket,
bracket is then surface mounted, steel with gray hammertone
epoxy nish
A-300
Flat aluminum bracket for ush mounting Magnehelic® gage
A-351
Pinch clamp to seal rubber tubing, as in a leakage test
A-352
Magneclip, slip on magnetic holder for acrylic plastic gages, per pair
A-353
Magnetic mounting, at style, secures to owmeter, etc. with 6-32
machine screw and boots insert
A-354
Magnetic mounting, edge style, secures edge of acrylic manometer
with 10-32 machine screw and boots insert
A-356
Gage plug with retainer loop, polyethylene plastic, for 1/4˝ ID
tubing, slip loop over tubing OD and insert plug for seal
A-357
Thermometer and terminal tube holder, SS wire
A-360
Aluminum DIN rail, 1 m
A-362
Stand-hang bracket, aluminum, for Minihelic® II gage
A-363
Scale clamp bar for 1221 manometer
A-364
Magnet assembly for 1222 manometers, 2 required (3 required for
1222-36 and M-1000)
A-366
Manometer cleaning brush 1/4˝ OD x 2-1/8˝ long, attach to wire
for use
A-368
Surface mounting plate, aluminum, for Magnehelic® gage
A-369
Stand-hang bracket, aluminum, for Magnehelic® gage
A-370
Mounting bracket, ush mount Capsuhelic® gage or Series 631B
transmitter in bracket, bracket is then surface mounted, steel with
gray hammertone epoxy nish
A-371
Surface mounting bracket, use with Photohelic® gage on horizontal
or vertical surfaces, also for Capsu-Photohelic® gages on vertical
only
A-395
Surface mounting bracket for Series 4000 Capsuhelic® gages,
steel with gray hammertone epoxy nish
A-397
Rugged step drill quickly provides true round holes in thin
materials, ideal for installation of Dwyer pitot tubes in sheet metal
duct, no centerpunch needed to steel, drills 3/16˝ through 1/2˝
holes in 1/16˝ increments
A-464
Flush mount kit for Magnehelic® gages
A-465
Flush mount space pressure sensor
A-497
Surface mounting bracket for Minihelic®II gage, steel with satin
black nish
®
gage, 603A,
Miscellaneous
Accessories
Loading...