Dwyer FPCA User Manual

Mounting Kits

Dwyer Instruments Inc. offers two mounting kits, which
address the need for a more modular housing system.
The photos show how a ow computer analog transmit­ter or pulse divider can be mounted on a PDWS Series

ow sensor using a WMK Kit.

F-FPCA-MK

WMK/MMK

Mounting Kit

Assembling the WMK Mounting Kit

WMK Adapter Kit

2. Attach WMK

1. Remove Strain Relief from the PDWS Series Meter

3. Tighten with Screwdriver, Cut Wire to Length

Page 1 of 2

Assembling the WMK Mounting Kit

(continued)

4. Add Electronics, Connect Wires Assembled Meter with Electronics

MMK Mounting Kit

The MMK (right) is a back half with feet, to convert any

meter mounted electronic module into a wall mount.

The housings themselves are the same rugged, fu­sion coated cast aluminum enclosures used on other
products. The electronic modules are physically in­terchangeable.

MMK Mounting Kit

2 of 2

Dwyer Instruments, Inc. • 102 Indiana Highway 212 • Michigan City, IN 46360 • USA

(P) 219.879.8868 • (F) 219.872.9057 • 1.800.872.9141 • www.dwyer-inst.com

PL-OM-65200396-082012

8/20/12