Dw Drums DW 9700, DW 9710, DW 9700L, DW 9710L Owner's Manual

Section 1: Leg Assembly and Base Section Adjustments

Section 1.1: Leg Assembly

2. Pull legs outward far enough to allow the clamp to contact memory lock.

3. Tighten wingscrew.

To open or close the legs, loosen the drumkey screw on the leg memory lock located on

the bottom tube section. Loosen the wingscrew on the clamp at top of base section and

adjust the tripod to achieve the desired position. Then tighten the clamp and memory

lock screw.

Section 2: Height Adjustments

Section 2.1: Tube Sections and Receivers

2. Raise or lower the upper or middle tubing sections to the desired position.

3. Tighten memory locks and wingscrews on tube receivers.

Section 3: Boom Arm Adjustments

Section 3.1: Straight/Boom Casting

DW’s Straight/Boom Casting utilizes an exclusive double-sided clamp with one side used

to adjust the distance and balance of the arm and the other controlling its angle. This

casting is also designed to allow the stand to be converted from a boom to a straight

stand by positioning the angle of the arm so that it is vertical and then telescoping it

through the casting and into the top of the upper tube section. To adjust either one of

the positioning adjustments, loosen the respective wingnut on the clamp, position the

arm as desired and retighten the wingnut.

Section 3.2: Boom Arm

2. To adjust the distance of the arm, loosen the distance clamp wingnut and position

the arm as desired.

3. Tighten the distance clamp wingnut.

4. Move the boom arm memory lock so that it interlocks with the notch in the top of

the straight/boom casting and tighten the drumkey crew on the memory lock.

Section 4: Tilter and Cymbal Space Adjustments

Section 4.1: Tilter

2. Loosen the Position Reset Handle.

Note: The Position Reset Handle is spring activated. To operate, grasp the handle with

your  ngers and use your thumb to press on the button in the center of the handle

while pulling the handle away from the tilter. Reset the handle to a more comfortable

position and release.

3. Adjust the angle of the tilter and retighten the Position Reset Handle and TechLock.

Section 4.2: Cymbal Space Adjustment

2. Spin the mechanism to open or close the amount of space between the upper and

lower cymbal felts and the cymbal. Be careful to leave some slack in the spacing as this

will allow the cymbal to sound fuller and prevent cracking.

3. Adjust the angle of the tilter and retighten the Position Reset Handle and TechLock.

Section 4.3: Drop-Resistant Wingnut

The contoured wingnut and cymbal stem feature a drop-resistant design for faster set up

and pack up as well as increased security. To remove the wingnut, gently spin it coun-

terclockwise. To replace the wingnut, spin it clockwise so that it securely contacts the

cymbal sleeve.

Section 5: Memory Labels

Section 5.1: Memory Labels

Eight sets of Memory Labels are included with each 9700 stand. These labels can be

adhered to the upper portion of each stand section and used to identify the parts of

individual stands when multiple stands are separated for transport.

Remove the stand and all packing materials from the box, then follow these instructions to set up and adjust your stand to  t the way you play.

9700

Tilter Section



Drop-Resistant Wingnut



Felt Washers



Cymbal Seat



Cymbal Space Adjustment



Universal Angle Adjustment



Techlock



Position Reset Handle

Tilter (see inset)

Position Reset Handle

Boom Arm

Boom Arm Memory Lock

Convertible Casting

Upper Tube

Tube Memory Lock

Tube Receiver

Center Tube

Tube Memory Lock

Tube Receiver

Base Section

Leg Clamp

Leg Memory Lock

Legs



Instructions and parts identi cations also apply to 9710, 9700L and 9710L stands.













The Drummer’s Choice

®

O W N E R ’ S M A N U A L

O W N E R ’ S M A N U A L

9000

SERIES

CYMBAL

STANDS

T

T

hanks for purchasing this DW product. It has been designed and manufactured to

hanks for purchasing this DW product. It has been designed and manufactured to

Thanks for purchasing this DW product. It has been designed and manufactured to T

provide a lifetime of trouble-free service. Please take a moment to familiarize your-

provide a lifetime of trouble-free service. Please take a moment to familiarize your-

self with the exclusive features and operating suggestions contained in this manual

self with the exclusive features and operating suggestions contained in this manual

in order to ensure its optimum performance. Should you have any further questions,

in order to ensure its optimum performance. Should you have any further questions,

feel free to contact your local authorized DW dealer.

feel free to contact your local authorized DW dealer.

— Don Lombardi

— Don Lombardi

president, Drum Workshop, Inc .

president, Drum Workshop, Inc .

DW 9700 Straight/Boom Cymbal Stand

DW 9700 Straight/Boom Cymbal Stand

guarantees the original owner, when presented with proof of purchase, that

warranty does not include moving parts. If, under normal playing conditions,

without  rst receiving a Return Authorization Number. Shipping charges to

warranty is limited to the monetary value of the product that is the subject

warranty for additional terms and conditions.

tom/cymbal

tom