Dw Drums 5000 Series, 5000AX, 5000AD, 5000CX, 5000TD Owner's Manual

Two-Way Beater

Accelerator/Turbo

Chain & Sprocket or

Cam w/Nylon Strap

Knurled Nut

Hex Nut

the center or an area 1-2 inches above the center of the drum. Once the desired height is achieved, secure the beater hub

wrench (provided). The beater ball should automatically be positioned at a right angle to the memory lock so that the beater

to release the locking hex nut. Tighten or loosen the lock nut to the create the desired tension, then release the hex nut

the side wing screw securely. Use the provided rubber hoop protector to avoid damage to the bass drum hoop.