Page 1
Handheld Programmer
Operating Instructions
AC01-001
Step 1 : Basic operation
These instructions relate to the use of the Handheld Programmer only.
To turn on the programmer lift the rubber flap on the base, this will
expose the switch and USB connection, move the switch in to the ON
position, the unit will now power up. Refit the rubber flap (see Programmer layout). Once powered on, the clock and date must be reset.
Using the left and right navigation buttons you can switch from menu to
menu.
Once you have selected the menu you wish to change, use the up and
down buttons to enter the part of the program you wish to change, when
you have done this, use the left and right buttons to change the settings.
When you are happy with the settings, point the programmer at the
sensor and press the send button (see Programmer layout). When the
sensor is set a confirmation tick will appear on the screen.
IM PORTAN T: You must point the programmer away
from the sensor and leave for a minimum of 30
seconds before attempting to use, this allows the
sensor to recalibrate. Attempting to use before this
time may cause the sensor to lock up or false trigger.
Programmer layout
9
T=000000 P=0000 R=00000
1
2
3
Step 2 : Data processing
To upload data on the programmer ensure the computer is on and
Microsoft Excel is loaded. Turn on the Programmer using the isolation
switch and connect the USB cable via the USB port. The cable will then
need to be connected to the computer. The Programmer will then display
a menu giving the option to ‘download’ or ‘charge’, press the ‘OK’ button
to begin download, then ‘download’ will be displayed on screen. The data
will then automatically upload into the Excel spread sheet and display
‘complete’.
IM PORTAN T: Microsoft Excel must be opened prior to
download.
Step 3 : Charging
The Programmer requires a universal USB charging device. If being
charged by computer connect the USB cable to the Programmer and
then to the computer. The Programmer will then display a menu giving
the option to ‘download’ or ‘charge’, follow prompts to ‘press any button’
to begin charging and display ‘charging’ on screen. Allow to trickle
charge for a minimum of 8 hours.
IM PORTAN T: Charging for longer than 8 hours will not
affect battery life or cause damage to the Programmer.
4
Key
1
Navigation button (x4) Switch cover
2
OK button Isolation switch
3
On/Off button USB / charging port
4
Receive button Screen legend:
5
Send button
5
The use of this crossed out wheeled bin logo
indicates that this product needs to be disposed
of separately to any other household waste.
6
7 8
6
7
8
9
T= No. of Operations
P= No. of Purges
R= Total Run Time (mins)
Page 2
Step 4 : Menu options
NOTE : The default settings above can be restored at any time if needed via the
‘System Settings’ menu on the Programmer.
SETUP CLOCK
Day
Month
Year
Hour
Minutes
Seconds
V2 TAP MENU
Run time
Range
Anti-vandal time
Automatic Purge
Purge run time
TAP MENU
Run Time
Sensor Range
Wave On/Off operation
Anti Vandal Time
Automatic Purge
Purge Run Time
Lock Outs
SHOwER MENU
Run Time
Sensor Range
Wave On/Off operation
Anti Vandal Time
Automatic Purge
Purge Run Time
Lock Outs
DEFAULT SETTINGS
(Once powered on, the clock and date must
be reset).
2 Seconds
5
30 seconds
OFF
1 Minute
2 Seconds
5
OFF
1 Minute
OFF
1 Minute
OFF
1 Minute
2
OFF
Run+10s
OFF
1 Minute
OFF
OPTIONAL SETTINGS
1 - 31
1 - 12
Current year onwards
0 - 23
0 - 59
0 - 59
2, 5, 10, 20, 30, 40 & 60 Seconds
1-10
30, 60, 75, 90 Seconds & 2 Minutes
OFF, 3, 6, 12, 24, 36 & 48 Hours
30 Seconds, 1, 2, 4 & 8 Minutes
2, 5, 10, 15, 20 & 30 Seconds
1 - 10
ON/OFF
30 Seconds, 1, 2, 4 & 8 Minutes
OFF, 3, 6, 12, 24, 36 & 48 Hours
30 Seconds, 1, 2, 4 & 8 Minutes
OFF, 4, 6, 8 & 10 Ops
30 Seconds, 1, 2, 3, 4 & 5 Minutes
1 - 3
ON/OFF
Run+10s
OFF, 3, 6, 12, 24, 36 & 48 Hours
30 Seconds, 1, 2, 4 & 8 Minutes
OFF, 4, 6, 8 & 10 Ops
URINAL MENU
Pre-Flush Wait
Pre-Flush Time
Main Flush Time
Sensor Range
Automatic Purge
Purge Run Time
BATH MENU
Run Time
Sensor Range
Wave On/Off operation
Anti Vandal Time
Automatic Purge
Purge Run Time
Lock Outs
AUTO FLUSH VALVE MENU
Range
User Detect Time
Dual Detect Time
Flush Time(s)
Walk Away Time
Automatic Purge
Purge Run Time
Lock Outs
wAVE FLUSH VALVE MENU
Flush Type
Flush Time(s)
Range
Automatic Purge
Purge Run Time
Lock Outs
1 Second
OFF
2 Seconds
5
OFF
4 Seconds
2 Minutes
2
OFF
Run+10s
OFF
1 minute
OFF
5
5 Seconds
20 Seconds
4 Seconds
2 Seconds
OFF
4 Seconds
OFF
Single
4 Seconds
2
OFF
4 Seconds
OFF
1 & 2 Seconds
OFF, 1, 2 & 3 Seconds
2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6 & 6.5 Seconds
1 - 10
OFF, 6, 12, 24, 36, 48 & 72 Hours
2, 4, 6, 8 & 10 Seconds
1, 2, 3, 4, 8 & 10 Minutes
1 - 3
ON/OFF
Run+10s
OFF, 6, 12, 24, 36, 48 & 72 Hours
30 Seconds, 1, 2, 4 & 8 Minutes
OFF, 2, 4, 6 & 8 Ops
1-10
1-10 Seconds
10, 12, 14, 16, 18, 20, 22, 24, 26 & 28 Seconds
2, 2.5, 3, 3.5, 4, 3/4.5, 3/5, 3.5/5.5, 4/6 & 6.5 Secs
1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5 & 5.5 Seconds
OFF, 3, 6, 12, 24, 36, 48 & 72 Hours
2, 3, 3.5, 4, 4.5, 5, 5.5, 6 & 6.5 Seconds
OFF, 2-10 Ops
Single or Dual
2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6 & 6.5 Seconds
1-3
OFF, 3, 6, 12, 24, 36, 48 & 72 Hours
2, 3, 3.5, 4, 4.5, 5, 5.5, 6 & 6.5 Seconds
OFF, 2-10 Ops
CHLORINATE MENU
Chlorination Time
Abort and Reset
PP0 0 -4 68 011116
1 Minute
1, 2, 3, 4, 5, 10, 20 & 30 Minutes
Loading...