INSTALLATION GUIDE
Exclusively Designed • INTERNATIONALLY RECOGNIZED
Items needed for Installation:
• 100 % clear silicon bathroom adhesive for installation of slab.
• (4) # 10 x 2 ½" construction screws for attaching to wall structure.
••Level
Philips tip screwdriver.
Directions:
•
Carefully unpack components.
•
Check fit of pedestal against wall surface, minor adjustments may need to be made
to the pedestal that will ensure a proper fit t o wall and floor.
• D'Vontz strongly advises attaching to solid wood wall structure i.e. (stud or 2x4
nailer). See fig. 1-A. If mounting to masonry wall use appropriate masonry screws.
Model # MDI2-xx
SILICONE
SEAL
30"
17"
2" x 4"
MINIMUM
NAILER
SILICONE
SEAL
Fig. 1-A Fig. 1-B
•
Level pedestal across the top ring and mount to wall structure using the #10 x 2 1/2 "
construction screws.
•
Position slab so that it is centered on pedestal, flush against the wall before applying
silicon adhesive.
•
While facing Pedestal from the front, gently lift slab from the side and apply silicon
adhesive to at least 2 are as between slab and pedestal ring. Repeat on other side.
See fig. 1 -B. Allow proper curing time for adhesive before using.
You are now ready for t he Vessel installation.
•
If you need any assistance during the installation of your D’Vontz pedestal, please call our Customer Service department at
877-322-3600.
Thank You for choosing D’Vontz.
Please install this product according to the installation guide and all local plumbing codes.
D’VONTZ • 7208 EAST 38th STREET • TULSA, OKLAHOMA 74145 • 918.622.3600 • FAX 918.622.3649 • WWW.DVONTZ.COM
Loading...