DVIGear HyperLight DVI-2300-AOC-TX, HyperLight DVI-2300-AOC-RX, HyperLight DVI-2301-AOC-TX, HyperLight DVI-2301-AOC-RX Quick Start Manual

DVI-23xxx-AOC

DVI Active Optical Cables

Quick Start Guide

Introduction

DVIGear’s HyperLight® Series is a new generation of advanced Active Optical Cables (AOC) that employs
cutting edge technology to deliver unprecedented resolution, performance and value. HyperLight DVI
cables provide robust features in a rugged yet compact and lightweight form factor. They are fully
HDCP 1.4 compliant and support signals with data rates up to 4.95 Gbps. These features enable
HyperLight cables to support any Single-Link DVI resolution with cable lengths up to 100 meters.

These cables are plenum-rated (UL CMP-OF), compact, lightweight and highly exible. Constructed
using a hybrid design of 4x POF (Polyuorinated Optical Fiber) and 6x copper wires, they are rugged,
yet exible, with a minimum bend radius of just two millimeters. To minimize cable diameter, two
removable DVI docking connectors may be detached, revealing a connector cross section that
measures just 13.9 x 14.2 millimeters. The docking connectors include xation screws for added
security, as do the removable cable pull covers. These features make the cables easy to install
even in narrow conduits, as well as in plenum spaces.

HyperLight cables are designed for use in mission critical applications where image quality and
dependability are paramount. The video signals are transmitted over four optical bers, which make
them immune to interference from environmental noise. The optical transmission path provides a
very low RFI / EMI prole, which allows the cables to be installed in sensitive applications with strict
security requirements. The cables draw power from the connected DVI source, eliminating the need
for an external power supply. HyperLight AOC cables are ideally suited for applications that require
ultra-high resolution DVI signals to be extended over long cable runs with awless image quality.

Typical Application

DVI DisplayDVI Source

TRANSMITTER

Note: Always use the supplied DVI docking connector on both ends of this cable.

TX

This cable is powered by the DVI source,

which eliminates the need for an external power supply.

DVI-23xxx-AOC DVI Active Optical Cable

DVIGear, DVIGear & Design, and HyperLight are trademarks of DVIGear, Inc.
and may not be used without the prior written permission of DVIGear, Inc.

RECEIVER

DISPLAY

DISPLAY

ReceiverTransmitter

RX

1

2

1

5

4

2

Cable Mated in DVI Docking Connector

3a

3b

TX / RX Cable Ends Mate with Transmitter / Receiver Docking Connectors Respectively

2