1. Do not dismantle the product housing or modify the printed circuit board
module as this may result in electrical shock or burn.
2. Do not attempt to service this product yourself as opening or removing the
product housing may expose you to dangerous voltages or other hazards.
Refer all servicing to qualied service personnel.
3. Keep this product away from liquids. Spills into the product housing may
result in re, electrical shock, or equipment damage. If liquid spills into the
housing, unplug the product immediately. Have the product checked by a
qualied service engineer before using it again.
4. Place the product in an even and stable location. If the product falls or is
dropped, it may cause an injury and/or malfunction.
5. Avoid exposing the product to extreme temperatures or to high humidity
levels as this may result in damage to the product.
6. Only use the supplied External AC Power Adapter. The use of other power
adapters may cause this product to fail or may cause a re.
7. Do not twist or exert excessive force on the ends of the connected cables
as this can cause them to malfunction. Take precaution to ensure that all
connected cables are not forced to bend beyond their minimum bend radius.
Product Liability
Every effort has been made to ensure that this product is free of defects.
DVIGear cannot be held liable for the use of this product or for any direct or
indirect consequential damages arising from its use. It is the responsibility of
the users of this product to check that it is suitable for their requirements and
that it is installed correctly.
All rights are reserved. No part of this manual may be reproduced or transmitted
by any form or means, electronic or mechanical, including photocopying,
recording or by any information storage or retrieval system, without the written
consent of DVIGear.
DVIGear reserves the right to revise any of its hardware and software, following
its policy to modify and/or improve its products where necessary or desirable.
This statement does not affect the legal rights of the user in any way. All
third-party trademarks and copyrights are recognized. The DVIGear logo is a
registered trademark of DVIGear, Inc. HDMI™ is a registered trademark of
HDMI LLC. All other trademarks are the property of their respective holders.
-1-
1.0 INTRODUCTION
The DVI-3571a is a universal presentation switcher / scaler that is ideally suited
for use in conference rooms, training facilities, classrooms, auditoriums, and
other presentation applications. The DVI-3571a accepts up to eight (8) video
inputs: 3x HDMI (or DVI), 3x RGB Analog (VGA), 1x Component Video and
1x Composite Video. Each input supports a broad range of signal formats
and resolutions. The selected input signal is routed simultaneously to 2x
HDMI outputs and 1x RGB Analog (VGA) output for downstream display and/
or processing. Two high performance scaling engines provide user-selectable
output resolutions up to 1080p and 1920x1200.
The DVI-3571a supports HDMI audio embedding and de-embedding. Each
video input is coupled with an analog stereo audio input connection. After
passing through an A/D converter, the selected audio input may be embedded
in the HDMI output signal, as well as routed to both analog and digital audio
output ports. The DVI-3571a also supports user-adjustable audio delay up to
150 ms for lip sync correction.
The DVI-3571a includes a variety of control options, including Ethernet, RS232,
IR Remote, and front panel selection. These control features allow the unit to be
seamlessly integrated into any professional AV system.
Our professional digital distribution products have been serving the industry
for over ten (10) years. DVIGear offers a full line of high quality Digital Matrix
Routers, Switchers, Splitters, Video Scalers, Up/Down/Cross Converters,
Format Converters, Analog-Digital Converters, as well as a wide range of long
reach Digital Cables, Extenders, and Optical Transmission systems.
1.1 Features
The DVI-3571a Presentation Switcher / Scaler has many innovative features:
• Inputs support HDTV resolutions up to 1080p; PC resolutions up to 1920x1200
• User-selectable HDMI and VGA output resolutions up to 1080p and
1920x1200 / 60Hz
• Supports HDMI / DVI input signals with or without HDCP encryption
• Includes 8x inputs: 3x HDMI / DVI, 3x RGB Analog, 1x Component
Video, 1x Composite Video
• Provides 3x mirrored video outputs: 2x HDMI, 1x RGB Analog
• Each video input is coupled with an analog stereo audio input port
• Supports audio embedding and de-embedding; includes digital and
analog outputs
• Controllable using Ethernet, IR remote, RS-232, and front panel
• Built-in web browser GUI control
• Screw-locking DC power connector for added security
• Rugged 1U metal enclosure, rack-mounting ears included
-2-
2.0 SPECIFICATIONS
Performance
Format Compliance
Video Input Formats
Maximum Pixel Clock Frequency
Maximum Video Bit Rate
Supported Color Depth
Audio Input Formats
Audio Output Formats
Audio Bandwidth
Audio Sampling Rate
Audio Levels
Audio Delay Adjustment
Input Connections
Composite Video Input
Component Video Input
Analog RGB Input
HDMIInput
Power Input
Output Connections
HDMIOutput
Analog RGB Output
Digital Audio Output
Analog Audio Output
Scaling Engine
Phase Lock Loops
De-Interlacing
Pull-Down
Noise Reduction
Display Settings
HDMI v1.2, HDCP v1.1 and DVI v1.0
Composite Video: NTSC or PAL
Component Video: YPbPr / YCbCr
HD15: Analog RGB,H,V
HDMI: Digital RGB
165 MHz
1.65 Gbps (single-link)
8-bit
HDMI: embedded audio
Analog Stereo Audio: 20KΩ impedance
HDMI: embedded audio
Analog Stereo Audio: 20KΩ impedance
Digital Audio (S/PDIF): 75Ω impedance
IR Remote Control with On-Screen Display navigation
Serial communication, 9-pin
Web browser GUI or TelNet
Mechanical
Dimensions (H-W-D)
Weight
Construction
Mounting Options
1.9” x 17.0” x 7.2” (47.0 mm x 432.0 mm x 183.0 mm)
4.9 lbs. (2.2 Kg)
Heavy-duty 1mm metal enclosure with jet black nish
Rack-Mount Ears, 1U full width
Environmental
Operating Temperature
Storage Temperature
Humidity (storage / operating)
+32° to +104° F (0° to +40° C)
-4° to +140° F (-20° to +60° C)
20% to 90% (non-condensing)
Power Requirements
External AC Power Adapter
Power Consumption
Input: 100~240VAC / 50-60Hz Output: 5VDC, 2.6A
5 VDC, 2.2 Amps, 11 Watts
Regulatory Approvals
Switcher / Scaler unit
ACPower Adapter
FCC, CE, RoHS
FCC, CE, UL, C-UL, CEC, GS, PSE, RoHS
Warranty
Limited Warranty
3 Years Parts and Labor
Model Number
DVI-3571a
Universal Presentation Switcher / Scaler
Accessories Included
1x External ACPower Adapter
1x IRRemote Control Unit
1x IR Receiver
1x User Guide
4x Rubber Feet
1x Rack-Mount Ears Set
1x HD-15 to 3-RCA adapter cable
Optional Accessories
International AC Power Adapter (Euro, UK, Australia)
Specications are subject to change without notice.
-4-
2.2 Supported Input Formats and Resolutions
The DVI-3571a accepts HDMI or DVI (using DVI-to-HDMI adapter cable), HD15
(VGA), Composite Video and Analog Component Video via separate connectors.
Each of the 8x input ports includes a dedicated analog stereo audio port. The
following tables show the supported input and output resolutions:
Input
Resolution
720 x 48060 (NTSC)Interlaced
720 x 57650 (PAL)Interlaced
720 x 48060Progressive
720 x 57650Progressive
1280 x 72050,60Progressive
1920 x 108050,60Progressive
1920 x 108050, 60Interlaced
640 x 48060Progressive
800 x 60060Progressive
1024 x 76860Progressive
1280 x 76860Progressive
1360 x 76860Progressive
1280 x 72060Progressive
1280 x 80060Progressive
Vertical
Rate (Hz)
Scan
Format
Signal Format / Connectors
Composite Video via 1x RCA
Component Video (YCbCr) via 3x RCA
RGB,H,V via HD15 and HDMI
Component Video (YPbPr) via 3x RCA
RGB,H,V via HD15 and HDMI
RGB,H,V via HD15 and HDMI
1280 x 102460Progressive
1440 x 90060Progressive
1400 x 105060Progressive
1680 x 105060Progressive
1600 x 120060Progressive
1920 x 120060Progressive
-5-
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.