01
FURNITURE TIPPING RESTRAINT FOR SIDEBOARD
Young children may be injured by tipping furniture and the use
of a tipping restraint is highly recommended.
When properly installed, this restraint could provide protection
against the unexpected tipping of furniture due to small tremors,
bumps or climbing. We recommend mounting this restraint to a
wall stud.
WARNING: This product is only a deterrent. It is not a
substitute for proper adult supervision.
Installation Instruction:
1. Attach one of the mounting brackets securely near the top back edge of the furniture piece by inserting the
screw. Refer to picture A.
2. Determine the final position of the furniture piece. Mark location on the wall approximately 2” below the
bracket mounted to the back of the furniture.
3. Drill a starter hole into the wall stud. If wall stud is not available, drill a hole into the wall and insert plastic
anchor. Gently tap anchor until the flange of the anchor is flush with the wall.
TIPPING KIT CHECK LIST
CODE COMPONENT QTY
01 PLASTIC STRAP 2
02 SCREW 4
03 NYLON WALL PLUG 2
04 METAL BRACKET 4
4. Attach the second bracket by inserting and securing the screw to the wall. Refer to picture B.
5. Align the two brackets.
6. Thread the strap through both brackets and tighten until snug.
7. Check to make sure that the brackets are firmly installed the strap is secure.
AB
03
04
02
THE WALL
01
BACK SIDE
Loading...