Dustless Dustie DA User Manual

Installation Instructions

DUST COLLECTION SYSTEM FOR RO/DA Sanders/Grinders

The Dustie RO/DA dust shroud comes with

a flexible dust shroud and band clamp. It fits
most popular makes and models of RO and
DA sanders/grinders.

Use a spanner wrench to hold the arbor in
place while installing the pad.

Begin installation by slipping the band clamp

2

over the Dustie RO/DA collar.1

Hand tighten the pad using the spanner

wrench.4

Slip the collar over the neck of the RO/

3

DA sander/grinder and tighten the band
clamp using a philips screwdriver. Posi­tion the vacuum port underneith the air
hose connector.

Inset the 18 inch convertor hose into the

6

port of the Dustie.5

Connect the other end of the 18 inch con-

7

verter hose to the main hose of the vacuum.

Manual072010

1285 East 650 South
Price, Utah 84501

p 435.637.5885 f 435.637.5895

www.dustlesstools.com