Dustless DustBull D1765 Owner's Manual

Saw Speci c Instructions

For the Husqvarna K970 saw: remove the screws holding the rubber feet on.
Remove the rubber feet, set aside, do not discard. Install the Universal Mounting
Bracket by following the installation instruction on previous page. Use original screws
to install.

For Newer Stihl saw: with round rubber feet. Remove the screws in the bottom
front of the saw. Loosen the rubber feet and slide Universal Mounting Bracket under
the rubber feet. Align the holes in the bracket with the holes where you removed the
screws in the bottom of the saw. Tighten the rubber feet back down and use original
screw if possible to tighten down the bracket. If original screws do not  t choose the
best screw from the included kit to secure bracket to the saw.

Silica Compliance

The DustBull complies with OSHA’s Silica Rule when used in accordance with Dustless
Technologies’ objective data available for download on the DustBull product page at Dustlesstools.
com.

Additional Products

1-3/8” BitBuddie

Model #D1900

7” CutBuddie

Model #D1750

DustBuddie Dust Shroud

for Flat Work

Model #D4000

Hepa Wet+Dry Dustless Vac

Model #D1603

7” DustBuddie XP

Model #D5850

6” Hose

5” DustBuddie

Model #D1835

PATENT N O. 5954863 & 5704956

dustlesstools.com

For cutting Block,
Brick, Pavers and
Rock with a gas

Stops
Dust

OWNERS MANUAL

Dust Shroud For Gas
High Speed Saws

DustBull D1765  ts most gas highspeed saws!

powered saw

Storms!

LIVE CUSTOMER SUPPORT & SERVICES:

1.800.568.3949 Toll-free in the U.S.
dustlesstools.com