Dustless D1603, D1605, D1606, D1608, 16250 Owner's Manual
...
OWNERS MANUAL
D16 Series
16 Series
dustlesstools.com
PATENT NO. 5954863 & 5704956
SAVE THESE INSTRUCTIONS CONSERVER CES INSTRUCTIONS
GUARDAR ESTAS INSTRUCCIONES
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANTES MESURES DE SECURITE IMPORTANTE PARA SU SEGURIDAD
NOTE: The reading and understanding of the Owner’s Manual is imperative prior to operating this machine. If you or your operator(s)
cannot read English, have this manual explained fully before attempting to operate this machine. Si Ud. o sus operadores no pueden
leer el inglés, el contenido completo de este manual debe ser explicado antes de intentar operacion de esta máquina.
Read the Owner’s Manual completely before attempting
to operate this unit. Failure to follow the warnings and
instructions may result in burns, re, electric shock, or
personal injury:
WORK AREA SAFETY
• Do not operate vacuum in explosive atmospheres. Sparks
from static electricit y or the motors may ignite dust or
fumes.
ELECTRICAL SAFETY
• Connect to a properly grounded outlet. See grounding
instructions.
• Always unplug unit when not in use and before ser vicing.
• Elec trical components are not user serviceable. Refer all
service to a qualied repair technician.
• Do not handle plug or operate vacuum with wet hands.
PERSONAL SAFETY
• Do not allow to be used as a toy. Close attention is necessary when
used by or near children.
• Do not change lters, clean the unit, or empty the barrel
until the plug has been disconnected from the electrical
outlet.
• Use special care when emptying heavily loaded barrels.
• Keep hair, loose clothing, ngers and all parts of body
away from openings and moving parts. There is a risk of
injury through get ting stuck or being drawn into moving
machinery.
• Use extra care when working on stairs.
• Injury to the eyes and/or body can occur if protec tive
clothing and/or equipment is not worn. Always wear safety
goggles, protective clothing, hearing protection, and a dust
mask. Exposure to high noise levels can cause hearing loss
or impairment. Wear OSHA-approved hearing protection
when using this vacuum.
TOOL USE AND CARE
• Always check the lters before each use. Do not use without
a dust collection bag and lters in place.
• Do not use with damaged cord or plug.
• Do not use if vacuum is not working as it should.
• Do not pull or carry by the cord, use cord as a handle, close
a door on cord, or pull cord around sharp edges or corners.
Do not run vacuum over cord. Keep cord away from heated
surfaces.
• Do not unplug by pulling on cord. To unplug, grasp the
plug, not the cord
• Turn off all controls before unplugging.
• Take notice of all safety and hazard notices on the vacuum.
• All safety and hazard notices on the vacuum must be kept
complete and legible.
• Changes, add-ons, or conversions of the vacuum which
might have an inuence to the safety of the vacuum
must not be undertaken without the permission of the
manufacturer. This applies in particular to the tting and
adjustment of safety devices and to welding on major and
load-bearing parts.
• Replacement parts must always comply with the technical
requirements and the specications of the manufacturer.
This is always guaranteed with original replacement parts
from the manufacturer.
• Inspection intervals and times for recurring checks specied
in these Operating Instructions must be complied with.
• In the event of operational malfunction the vacuum must be
shut down immediately. The malfunc tion must be rectied
before starting the vacuum again.
• The dust bin of the dust collec tor has to be emptied before
transportation.
• Should dust begin to blow out of the vacuum, it must be
shut down, cleaned (including the motor housing) and the
problem xed before returning to ser vice. Failure to do
so could put dangerous dust in the air and will void the
warranty.
SERVICE
• Adjustments, servicing, and inspection work and inspection
intervals specied in these Operating Instructions, as well as
any information on the replacement of parts and systems of the
vacuum must be undertaken and complied with.
• These activities can only be undertaken by qualied
personnel.
• Make sure that electrical components used for replacement
comply with the original parts and are correctly adjusted if
necessary.
• Before performing any maintenance, place the vacuum in
the safety off position which is the position of the vacuum
when it cannot generate any hazard. To do this, switch off
the dust collector, pull out plug, and secure the vacuum
against unintended star t up.
SPECIFIC SAFETY RULES
• Do not use to pick up ammable or combustible liquids,
such as gasoline.
• Do not pick up any objects that are burning or smoking,
such as cigarettes, matches, or hot ashes.
• Dispose of the dust so that you meet the requirements of
local regulations.
• WARNING - to reduce the risk of electric shock - Do
not use on wet surfaces. Do not expose to rain. Store
indoors.
• This appliance is intended for commercial and household
use.
GROUNDING INSTRUCTIONS:
This appliance must be grounded. If it should malfunction or break down,
grounding provides a path of least resistance for electric current to reduce
the risk of electric shock. This appliance is equipped with a cord having an
equipment-grounding conductor and grounding plug. The plug must be
inserted into an appropriate outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
WARNING - Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check
with a qualied elec trician or service person if you are in doubt as to whether the outlet is properly grounded. Do not modify
the plug provided with the appliance – if it will not t the outlet, have a proper outlet installed by a qualied electrician.
This appliance is for use on a nominal 120-V circuit, and has a grounded plug that looks like the plug illustrated in sketch A.
A temporary adapter that looks like the adapter illustrated in sketches B and C may be used to connect this plug to a 2-pole
receptacle as shown in sketch B if a properly grounded outlet is not available. The temporary adapter should be used only
until a properly grounded outlet (sketch A) can be installed by a qualied electrician. The green colored rigid ear, lug, or the
like extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box cover.
Whenever the adapter is used, it must be held in place by a metal screw. Exception: In Canada, the use of a temporary adapter
is not permitted by the Canadian Elec trical Code, C22.1.
B C
Adapter
A
Grounded Plug
3
Customer Service Helpline 1.800.568.3949 dustlesstools.com
IN THE BOX
Extension Wands
D1603 16 GAL WET+DRY DUSTLESSVAC WITH 12 FT. HOSE:
D1605 16 GAL WET+DRY VAC-FOREIGN:
D1606 HEPA 16 GAL WET+DRY VAC:
Crevice Tool
Floor Tool
Lid
Barrel
Hose
WunderBag
10” Clamp 7” Clamp
Inner Filter
Outer Filter
WunderBag
Filter Cover
HEPA Filter
10” Clamp
WunderBag
10” Clamp 7” Clamp
Inner Filter
Outer Filter
Shaker Basket
Shaker Basket
Extension Wands
Crevice Tool
Floor Tool
Lid
Barrel
Hose
Extension Wands
Crevice Tool
Floor Tool
Lid
Barrel
Hose
Loading...