Model’s 16003, 16006,
16009, 16010, & 16011
16 Gallon
DUSTLESSTMWET/DRY VACUUM
HEPA VACUUM, AND TOOLSYNC
TM
TOOL ACTIVATED VACUUM
OWNER’S MANUAL
M
CONGRATULATIONS: You are now the owner of a Dustless
Wet/Dry Vacuum which incorporates the latest advancements
in wet/dry dust removal technology. This vacuum is engineered
to eliminate the dust that has been a problem for so many
years with wet/dry vacuums almost from their inception. This
vacuum is different from anything in its category.
Once again CONGRATULATIONS
T
This cleaner was inspected and
packaged carefully before being
shipped from the factory.
If you should happen to need
assistance during assembly or
operation, call 1-800-568-3949
for our customer service department.
Serial Number __________________________
Model Number _________________________
Model and serial numbers are found on the
side of the motor cover. You should record both
model and serial numbers in a safe place for
future use.
80 0. 56 8. 39 49
12 85 Eas t 650 S out h
Pr ice , U tah 8 450 1
du stl ess tec hno log ies .co m
FULL ONE-YEAR WARRANTY
ON DUSTLESSTMWET/DRY VACUUMS
M
If within one year from the date of purchase, this Dustless
Vacuum fails due to a defect in material or workmanship, Dustless
Technologies will repair or replace it, free of charge. Please note that
this warranty is limited to and applies only to the original purchaser “For
Household Use Only,” “POUR USAGE ME’ NAGER TYPE MENAGER”, so
long as that use is in accordance with instructions and limitations set out
in this manual.
If this
DustlessTMWet/Dry Vacuum
is used for commercial or rental
purposes, this warranty coverage applies for 90 days from date
of purchase.
Warranty registration - Please fill out and return the warranty
registration card accompanying your cleaner. Proof of purchase date
will be needed for warranty work.
Obtaining Warranty Service - Warranty Service is available by simply
contacting the factory at 1-800-568-3949.
This warranty gives you specific legal rights, and you may also have
other rights which vary from state to state. There are no warranties,
express or implied, written or verbal, which extend beyond the
description in this manual.
T
Wet/Dry
If this equipment does cause harmful interference to radio or television reception, which can be
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction. Many cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
CAUTION: Any changes or modification not express approved by Dustless Technologies, Inc. could void the user authorization to operate this equipment.
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANTES MESURES DE SECURITE
IMPORTANTE PARA SU SEGURIDAD
UNPACKING AND CHECKING CARTON CONTENTS
Remove entire contents of carton. Check each item against the Carton
Contents List. Notify Dustless Technologies immediately if any parts are
damaged or missing.
SAVE THESE INSTRUCTIONS
CONSERVER CES INSTRUCTIONS
GUARDAR ESTA INSTRUCTIONES
• Read the Owner’s Manual completely before attempting to operate
this unit.
• Always check the filters before each use.
• Connect to a properly grounded outlet. See grounding instructions.
• Don’t change filters, clean the unit, or empty the canister until the
plug has been disconnected from the electrical outlet. Always unplug
unit when not in use and before servicing.
WARNING– To avoid risk of electrical shock, do not
use out doors or on wet surfaces.
Avertissement– Pour reduire les risques de choc
electrique, ne pas utiliser a l’exterieur et ne pas aspirer de matieres
humides.
Advertencia– Para reducir el riesgo de un
electrochoque, no usarlo afuerra o mojado.
WARNING– To reduce the risk of burns, fire,
electric shock, or personal injury:
• Do not allow this unit to be used as a toy or to run unattended at any
time. Keep children away from this unit.
• Do not use accessories except those recommended and provided by
Dustless Technologies. Use this unit only for its intended use as
described in this manual. Use of accessories not recommended by the
manufacturer may cause fire, electric shock, or injury. (See parts list)
• Do not operate this unit in an enclosed space where flammable,
explosive or toxic vapors are given off by oil-base paint, paint thinner,
gasoline, etc.
• Do not vacuum toxic, carcinogenic, combustible, or other hazardous
materials such as asbestos, arsenic, barium, beryllium, lead, pesticides,
or other health endangering materials.
• To avoid the igniting of vapors or dust due to the arcing of the motor
brushes, do not pick up flammable or readily combustible material.
• Do not expose your Vacuum to excessive heat as damage to your
vacuum may occur and the 1 year warranty will be null and void.
• Do not pick up anything that is burning or smoking, such as cigarettes,
matches, or hot ashes.
• Do not use without dust bag and/or filters in place.
• Do not pull unit by the suction hose.
• Do not abuse cord. Never carry your Vacuum by the cord or pull cord to
disconnect it from the outlet. Grasp the plug, not the cord.
• Do not leave the cord lying on the floor once you have finished the
cleaning job. It can become a tripping hazard.
• Never handle plug, cord, or cleaner with wet hands.
• Never drop or insert any objects into any openings. Do not use with any
opening blocked; keep free of dust, lint, hair, and anything that may
reduce air flow.
Keep cord away from heat, oil and sharp edges. Do not close doors on the
•
cord or snag it under furniture or pull around corners with sharp edges.
• The operation of a Wet/Dry Vacuum can result in foreign objects being
blown into your eyes, which can result in eye damage. Always wear
safety goggles when operating vacuum.
• Use special care when emptying heavily loaded canisters.
Do not use outdoors or on wet surfaces. Do not leave appliance when
•
plugged in. Unplug from outlet when not in use and before servicing. Do not
use with damaged cord or plug if appliance is not working as it should, has
been dropped, damaged, left outdoors, or dropped into water.
• Wear eye and hearing protection. Always use safety glasses. Everyday
eyeglasses are NOT safety glasses. USE CERTIFIED SAFETY EQUIPMENT.
Eye protection equipment should comply with ANSI Z87.1 standards.
Hearing equipment should comply with ANSI S3.19 standards.
2
Carton Contents List
Key
Qty Description
A
A1Lid Assembly
B1Intermediate Cover
C1Accessory Tray
D1Tank Assembly
E 2 Front Legs
(smooth) & screws
F2Back Legs (with/
C
hooks) & screws
G2Extension wands
H1Crevice Tool Accessory
I1Wet/Dry Floor
Tool Accessory
J112' x 1
1 Owner’s Manual
1
/2” Hose
F
E
1 Warranty Card
G
J
H
I
J
GROUNDING INSTRUCTIONS:
This appliance must be grounded.
If it should malfunction or breakdown,
grounding provides a path of least
resistance for electric current to reduce
the risk of electric shock. This appliance
is equipped with a cord having an
equipment - grounding conductor and
Grounded
Plug
grounding plug. The plug must be
inserted into an appropriate outlet that is properly installed and grounded
in accordance with all local codes and ordinances.
DANGER - Improper connection of the conductor can result in a risk of
electric shock. Check with a qualified electrician or service person if you
are in doubt as to whether the outlet is properly grounded. Do not modify
the plug provided with the appliance.
NOTE: Static shocks are common in dry areas or when the relative
humidity of the air is low. This is only temporary and does not affect
the use of the Vacuum.
B
D
ASSEMBLY
To install the legs and accessory tray, undo the clips holding the intermediate cover in place and set the cover and lid assembly
aside. Turn tank upside down. Front legs are on either side of the drain port opening. These front legs do not have the small hooks
on either side. The back legs do have the hooks. These hooks are for the hose to rest on when in storage.
Align legs with openings provided on bottom of the canister and slide into place. The holes will only align in proper position
for front and back legs. Insert black support screw into hole and tighten screw with a Phillips screwdriver.
Turn cleaner tank right side up.
Attach Accessory Tray
Align the three slots on the edge of the accessory tray with the three guides on the rear side of
the tank and press the accessory tray toward the tank as you push the tray down. The two locking tabs will slide under the rim of the tank and catch. By pushing the tray down and toward
the tank it will lock into place.
Place intermediate cover and lid assembly right side up and set on top of the tank.
Attach the yellow clips from the tank onto the intermediate cover.
The Lid Assembly with the vacuum controls, motor, and filters are all preassembled at the
factory for your convenience. Maintenance and replacement of filters is described later in
this manual.
Attach hose, wands and cleaning accessories
Hose and accessories are stored on the unit. The hose will loop through the two outside holes of the
accessory tray and rest on the hooks of the back legs as shown below. For convenience, additional
accessories can be stored on tray when not in use.
To Use Accessories
Push hose into tank port; twist hose to tighten or loosen connection. The wands and cleaning accessories attach to hose in the same manner.
GENERAL INFORMATION
Dustless Technologies Model 16003 Wet/Dry Vacuum delivers 99% filtration at .5 micron which is great for fine particle pick-up, like
drywall, concrete, or surface dust. All units come with a powerful 11 amp motor, dual filtration system, corrosion resistant tank, large
wheels and an integrated accessory holder. Model 16010 comes with a built-in ToolSync outlet for use with power tools providing an
automatic vacuum start-up when the tool is turned on and about a 6 second shut-off delay to clear the hose when the vacuum is
turned off. Model 16006 Wet/Dry Vacuum has HEPA certified filters installed and provides filtration rated at D.O.P Eff. Mil. Std. 282:
99.97% min. at .3 micron. The Model 16011 HEPA Wet/Dry Vacuum comes with ToolSync.
The ToolSync model vacuums (16009, 16010, 16011) are intended for use with small hand held power tools with current rating 8
amperes or less. Accessories are available to allow larger tools to operate with the vacuum. See the ToolSync Operation section below
for more information.
Automatic Suction Shut-Off
NOTE: The unit must be used in the upright position at all times, otherwise the automatic suction
shut-off will activate. The automatic suction shut-off functions when the tank fills with liquid. As
the tank fills, the ball float ( inside the cage ) rises until it seats itself against the bottom of the
intermediate cover. This shuts off the suction of the vacuum cleaner when the tank is full.
ToolSync Vacuum Controls (Models 16009, 16010 and 16011)
Wireless remote
start plug
I – Continuous run mode.
No power to outlet
Vacuum ToolSync outlet
Note: Model 16009 comes without the
Vacuum ToolSync outlet and Wireless
remote start plug
Power cord
0 – Off
II – Automatic or ToolSync
mode. Power is supplied to
outlet, vacuum will start
when tool activates.
3