Duro-Last Counter Flashing and Reglet User Manual

DATA SHEET

Material

Gauge

Finish

Aluminum

.040

Mill or Kynar®

Stainless Steel

24-gauge

N/A

Bonderized Steel

24-gauge

N/A

Galvalume

24-gauge

Mill or Kynar®

Copper

16 oz.

Mill

1-Piece Reglet

2-Piece Reglet

Surface Mount

Counter Flashing

Counter Flashing & Reglet

Description:

Reglets provide a watertight protection along parapet
wall termination that delivers a professional
appearance. Available as a 1 or 2-Piece system and
surface mount.

Manufactured from various metals, (see chart

below), to specific projects in 10’ lengths.

Counter flashes parapet terminations providing a

finished look.

Bottom flashing on 2-piece reglet is easily

removed for re-roofing or maintenance. Rivets
secure counter flashing to receiver.

Contact Duro-Last® or EXCEPTIONAL® Metals to
request a color chart, samples and information
regarding custom metals and finishes.

Energy Efficiency:

LEED® and ENERGY STAR® compliant; Recyclable.

Installation:

1. Only applicable to concrete or block walls.

2. Install in accordance with Duro-Last detail
drawings #6130 and #6145.

3. Any deviation from the requirements set forth in
the detail drawings must be pre-approved, in
writing, by the EXCEPTIONAL Metals Technical
Department.

Warranty:

Duro-Last offers a wide range of warranty coverage for
EXCEPTIONAL Metals products when used with the
Duro-Last roofing system, including paint and finish.

Technical Services:

Product samples, detail sheets, color chips, and color
chart are available for your submittal package. For
assistance with questions or submittals, contact your
local representative or call EXCEPTIONAL Metals.

“Duro-Last” and “EXCEPTIONAL” are registered marks owned by Duro-Last Roofing, Inc. Revised 8/30/2012