Duro-Last Conductor Head User Manual

DATA SHEET

Material

Gauge

Finish

Aluminum

.032

Mill or Kynar®

Stainless Steel

24-gauge

N/A

Bonderized Steel

24-gauge

N/A

Galvalume

24-gauge

Mill or Kynar®

Copper

16 oz.

Mill

Shown with metal
flange scupper

Description:

The Conductor Head is designed to attach to the wall
below the scupper, leaving the scupper visible from the
ground. It complements the roof design and directs rain
water into downspouts.

Manufactured from various metals (see chart

below).

Standard designed conductors have the same

appearance as the vinyl-back collector.

Commonly ordered with a metal flange scupper,

producing an attractive combination.

Contact Duro-Last® or EXCEPTIONAL® Metals to
request a color chart, samples and information
regarding custom metals and finishes.

Installation:

1. Install in accordance with Duro-Last detail
drawing #2071.

2. Any deviation from the requirements set forth in
the detail drawings must be pre-approved, in
writing, by the EXCEPTIONAL Metals Technical
Department.

Warranty:

Conductor Head

Duro-Last offers a wide range of warranty coverage for
EXCEPTIONAL Metals products when used with the
Duro-Last roofing system, including paint and finish.

Technical Services:

Product samples, detail sheets, color chips, and color
chart are available for your submittal package. For
assistance with questions or submittals, contact your
local representative or call EXCEPTIONAL Metals.

“Duro-Last” and “EXCEPTIONAL” are registered marks owned by Duro-Last Roofing, Inc. Revised 8/12/2012