Duro-Last 2 inch Poly Plates User Manual
DURO-LAST® POLY-PLATE
Description:
The Duro-Last® Poly-Plate is 0.335 inch (8.5 mm)
thick, 2 inch (51 mm) diameter and manufactured
using a glass-filled polycarbonate blend.
Polycarbonate has proven weatherability and
resiliency. Duro-Last Poly-Plates are packaged and
sold in quantities of 1,000.
Duro-Last Poly-Plates include a recessed 0.280 inch
(6.4 mm) diameter hole in the center to prevent the
screw head from coming in contact with the
Duro-Last® Roofing membrane. Duro-Last
Poly-Plates have 10 “cleats” on the bottom to
enhance the wind uplift characteristic of the Duro-Last
membrane.
The Duro-Last Poly-Plate is a l ong -la sting and durable
plate that is only available only from Duro-Last, Inc.
DATA SHEET
Material Safety Data Sheet:
Product Identity: Poly Plates
Installation:
1. The Duro-Last Poly-Plate must be used for
securing the Duro-Last membrane to the deck
along the prefabricated fastening tab of the sheet
parallel to the tab direction.
2. The outside edge of the Poly-Plate must be
installed flush to the edge of the fastening tab.
3. Refer to detail 1190 for installation information.
Duro-Last: The Proven Performer®
www.duro-last.com
"Duro-Last " an d " The World's Best Roof" are registered marks owned by Duro-Las t , Inc.
25
800-248-0280
2009
Loading...