Page 1
DURO DYNE EAST CORP.
Bay Shore, NY 11706
DURO DYNE MIDWEST
Fairfield, OH 45011
DURO DYNE WEST
Santa Fe Springs, CA 90670
DURO DYNE INTERNATIONAL
Bay Shore, NY 11706
Page 2
Super Sabers®
Self Piercing Screws For Light To Medium Gauge
Designed for light-to medium-gauge materials, the Super
Saber Point offers one-step fastening. Its time saving performance is related to the saber-sharp piercing point with a
“fine-cut” machine thread, which pierces the metal upon
contact. Once pierced, the thread propels the screw
through metal rapidly and almost without effort.
* All Standard Saber Screws are 1/4” Head
ITEM
SIZE
6X3/8
7X1/2
8X1/2
8X3/4
8X1
8X1-1/2
8X2
10X1/2
10X3/4
10X1
HUNDRED
PACK
(SAC)
ITEM#
14165
14166
14167
14168
14193
14172
14173
14169
14170
14171
TWO-FIFTY
PACK
(SAQ)
ITEM#
14300
14301
14302
14303
14304
14305
14306
14307
14308
14309
SPECIAL 5/16” HEAD SABER SCREWS
ITEM SIZE
10x3/4-5/16 Head
FIVE-HUNDRED
PACK
(SAF)
ITEM#
14320
14321
14322
14323
14324
14222
14221
14327
14328
14329
CODE & ITEM #
SAB 15177
THOUSAND
PACK
(SAT)
ITEM#
14158
14159
14160
14161
14174
14175
14176
14162
14163
14164
BUCKET
PACK
(SAP)
ITEM#
15153
15154
15155
15156
15167
15168
15169
15157
15158
15170
SPECIAL PAINTED SABER SCREWS
ITEM SIZE
8x2 SAC 15180 White
PRO POINTS®
Self Drilling Screws For Heavy Gauge
Pro-Point Screws, with a precision formed drill point, are
designed to fasten heavy gauge metals.These screws assure accurately sized holes for maximum holding power,
eliminating the need for hole preparation and frequent
alignment problems encountered in parts assembly.
QUANTITY
PER
BUCKET*
5M
5M
5M
4M
3M
3M
3M
4M
3M
3M
BULK
PACK
(SAB)
ITEM#
15108
15109
15110
15111
15124
15125
15126
15112
15113
15114
QUANTITY
PER
BULK
20M
17M
14M
10M
7M
4M
3M
10M
7M
6M
COLORCODE & ITEM #
ITEM
DRIVER
SIZE
8X1/2
8X5/8
8X3/4
10X1/2
10X5/8
10X3/4
10X1
12X3/4
*Speed Data: Drill speeds from 1800 to 2500 are recommended. #8 and #10 screws can be installed up to 3600 rpm.*Screws also
available in other packaged quantities
5/16
5/16
5/16
5/16
5/16
SIZE
1/4
1/4
1/4
DRILL
PT.
SIZE
2
2
2
2
3
3
3
3
MAX. DRILL
CAPABILITY
DEC. GA.
.100 12
.100 12
.100 12
.110 11
.175 7
.175 7
.175 7
.210 5
MAX. MATL
GRIP
IN. DEC.
1/4 .2605
3/8 .3855
1/2 .5105
15/64 .2344
9/32 .2813
13/32 .4603
21/32 .6503
23/64 .3741
HUNDRED
PACK (PPC)
ITEM#
14177
14178
14179
14180
14181
14182
14183
14184
FIVE-HUNDRED
PACK (PPF)
ITEM#
14340
14341
14342
14343
14344
14345
14346
14347
THOUSAND
PACK (PPT)
ITEM#
14185
14186
14187
14188
14189
14190
14191
14192
BUCKET
PACK (PPP)
ITEM# QTY.
15159 5M
15160 5M
15161 4M
15162 4M
15163 3M
15164 3M
15166 3M
15175 3M
BULK PACK
(PPB)
ITEM# QTY.
15127 10M
15128 10M
15129 10M
15130 8M
15131 5M
15132 5M
15133 5M
15134 5M
Page 3
Ratchet Action
Riveter
Duro Dyne’s Ratchet Action Riveter features:
• A handle opening-which you can set for a comfortable grip and maximum power.
• Ejects broken stems from the front.
The Ratchet Action Riveter is used for setting all popular diameter blend rivets.
You need only to select and insert the proper nozzle to accomodate the rivet.
Item#
22030
22031
Model
DDPR-5
DDPRK-5
DDPRK Kit
Description
Ratchet-Action Gun
Contains: DDPR-5 Gun, 200
asst., popular rivets, 50 back-up
washers, #30 “Super T” Drill Bit.
DDPR-5 Gun
For Rivet Dia.
1/8”, 5/32”, 3/16”
1/8”, 5/32”, 3/16”
Page 4
Screw Installation
Electric Drill
Use 1/4” capacity low torque drill with
speed from 1800-2500 RPM.
Drill Chuck
Duro Dyne 1/4” and 5/16” socket sizes
are designed with a heavy-duty magnet to hold screws securely in position
and are able to withstand impact of
usage without undue wear.
Screw Length for Super Sabers
Must be sufficient to engage multiple
layers of metal being fastened. With
two pieces of light-gage metal, unsupported back piece may push away under pressure. Screw length must be long
enough to engage back piece.
Screw Length for Pro Points
Drill point length must exceed total
thickness of material to be fastened
including gaps. Thread length must also
exceed combined material thickness.
Top material to be drilled
Thickness to be drilled
Technique
Set screw in chuck, press point firmly
against metal, and start drill. As screw
bites into metal, release trigger to allow
drill momentum to seat screw without
stripping. Heavier gages of metal require greater pressure.
Drill Point Length
Must Exceed Total Thickness
Drilled or punched top
material
Bottom material to be drilled
Drill Screw Chucks
Super hard, yet shock resistant, Duro Dyne Chucks and Xcelite
& Drivers
Nutdriver outperform all others. A strong, permanent magnet
holds screw firmly in position. Precision hex hole resists reaming
effect of screw head during extended usage.
ITEM #
16008
16009
16015
16016
871097
871100
DCL-516
DCXL-14
DCXL-516
MODEL
DCL-14
L8MV
L10MV
FOR SCREW
HEAD SIZE
1/4”
5/16”
1/4”
5/16”
1/4”
5/16”
OVERALL
LENGTH
2 5/8”
2 5/8”
6”
6”
10 1/8”
10 1/8”
Page 5
Pin Rivets™
Pin Rivets are strong, hollow rivets assembled
onto a solid mandrel, manufactured to strict
quality control standards, and available in a
wide range of sizes and styles to provide the
proper rivet for every type of application. Pin
Rivets are inserted and set from the same side,
they are particularly practical where there is
no access to the reverse side of the work.
PART 1
Rivet Material
S=Steel
A=Aluminum
C=Copper
X=Stainless Steel
PART 2
Pin Material
S=Steel
A=Aluminum
C=Copper
(coated steel)
X=Stainless Steel
PART 3
Rivet Diam.
(in 32nds
of an inch)
3 = 3/32”
4 = 1/8”
5 = 5/32”
6 = 3/16”
8 = 1/4”
PART 4
Maximum
Grip (in 16ths
of an inch)
1 = 1/16”
2 = 1/8”
3 = 3/16”
4 = 1/4”
5 = 5/16”
6 = 3/8”
8 = 1/2”
10 = 5/8”
PART 5 & 6
Rivet
Head Style
D=Dome
C=Countersunk
LF=Large Flange
B=Bulk
ITEM#
29001
29002
29003
29004
29005
29006
29007
29008
29009
29010
29011
29012
29027
29028
29029
29030
29031
29032
29033
29034
29035
29036
29037
29038
29039
29041
29042
29043
29044
29021
29022
29023
29054
29055
29056
BULK PACK
DESCRIPTION
STEEL BODY / STEEL MANDREL
SS41DB
SS42DB
SS43DB
SS44DB
SS46DB
SS52DB
SS54DB
SS56DB
SS62DB
SS64DB
SS66DB
SS68DB
ALUMINUM RIVET/STEEL PIN
AS32DB
AS34DB
AS41DB
AS42DB
AS43DB
AS44DB
AS45DB
AS46DB
AS52DB
AS53DB
AS54DB
AS56DB
AS62DB
AS64DB
AS66DB
AS68DB
AS610DB
AS42CB
AS43CB
AS44CB
AS66LFB
AS68LFB
AS610LFB
QTY.
10M
10M
10M
10M
10M
8M
8M
8M
5M
5M
5M
5M
10M
10M
10M
10M
10M
10M
10M
10M
8M
8M
8M
8M
5M
5M
5M
5M
5M
10M
10M
10M
5M
5M
5M
ITEM#
29013
29014
29015
29016
29050
29051
29057
29058
29059
29060
29061
29062
29063
29064
29065
29066
29067
29068
29070
29071
29072
29073
29074
29075
29076
29084
28085
29086
BULK PACK
DESCRIPTION
STAINLESS BODY / STAINLESS MANDREL
XX42DB
XX44DB
STAINLESS RIVET / STEEL PIN
XS42DB
XS44DB
COPPER PLATED RIVET & PIN
CC42DB
CC44DB
ALUMINUM RIVET/ALUMINUM PIN
AA32DB
AA34DB
AA41DB
AA42DB
AA43DB
AA44DB
AA45DB
AA46DB
AA52DB
AA54DB
AA56DB
AA62DB
AA64DB
AA66DB
AA68DB
AA610DB
AA42CB
AA43CB
AA44CB
AA66LFB
AA68LFB
AA610LFB
QTY.
10M
10M
10M
10M
10M
10M
10M
10M
10M
10M
10M
10M
10M
10M
8M
8M
8M
5M
5M
5M
5M
5M
10M
10M
10M
5M
5M
5M
* Rivets are also available in thousand packs.
Page 6
Drill Bits
Hot Rolled Forged
Fast Cutting - Fast Starting
√
1350 split point starts hole where you
place it. Drill does not “walk” or mar
metal or waste time.
Long Wearing - Extra Hard
√
High Vanadium steels-specially
hardened-make “Super T” Drill Bits
harder and longer wearing than
others.
Heavy Web Reduces Breakage
√
Web is the portion which is solid
steel from point to shank. “Super- T”
has heavier web than ordinary
bits. This means more flexibility, less
breakage.
Extra Strength - Less Snapping
√
Roll forging allows bits to withstand
stress of tortional twisting.This happens whenever a drill bit binds.
Result: Less snapping!
DRILL BIT SIZE SELECTION CHART
Item# Model# Size Overall Length
24031 TEDB 1/8 1/8 2 INCHES
24032 TEDB #30 #30 2 INCHES
PACKED 10 PER POUCH
SIZE
#41
7/64
#31
1/8
#30
9/64
5/32
#20
11/64
3/16
#11
7/32
1/4
9/32
DECIMAL EQUIV.
.0960
.1093
.1200
.1250
.1285
.1405
.1562
.1610
.1719
.1875
.1910
.2187
.2500
.2811
ITEM #
24001
24002
24003
24004
24005
24006
24007
24008
24009
24010
24011
24012
24013
24014
DESC.
TD-41
TD-7/64
TD-31
TD-1/8
TD-30
TD-9/64
TD-5/32
TD-20
TD-11/64
TD-3/16
TD-11
TD-7/32
TD-1/4
TD-9/32
Duro Dyne National Corp., 81 Spence St., Bay Shore, NY 11706
Duro Dyne East Corp., 81 Spence St., Bay Shore, NY 11706
Duro Dyne West Corp., 15005 Marquardt Ave. Santa Fe Springs, CA 90670
Duro Dyne Midwest Corp., 3825 Symmes Rd., Fairfield, OH 45011
Duro Dyne Canada Inc., Lachine, Quebec H8T1B3
Duro Dyne International Division, Bay Shore, NY 11706
PACKAGED 100 PER BOX
ITEM #
24017
24018
24019
24020
24021
24022
24023
24024
24025
24026
24027
24028
24029
24030
Phone: 631-249-9000
Phone: 631-249-9000
Phone: 562-926-1774
Phone: 513-870-6000
Phone: 514-422-9760
Phone: 631-249-9000
DESC.
TDB-41
TDB-7/64
TDB-31
TDB-1/8
TDB-30
TDB-9/64
TDB-5/32
TDB-20
TDB-11/64
TDB-3/16
TDB-11
TDB-7/32
TDB-1/4
TDB-9/32
Fax: 516-249-8346
Fax: 516-249-8346
Fax: 562-926-5778
Fax: 513-870-6005
Fax: 514-636-0328
Fax: 516-249-8346
© 2003Duro Dyne Corp.
Printed in USA 10/2003
BB014400
Loading...