DURKOPP ADLER 867, 867-M, 867-M PREMIUM Additional Instructions
867
867-M
867-M PREMIUM
Additional Instructions
Remaining thread monitor
IMPORTANT
READ CAREFULLY BEFORE USE
KEEP FOR FUTURE REFERENCE
All rights reserved.
Property of Dürkopp Adler AG and protected by copyright. Any reuse of these contents,
including extracts, is prohibited without the prior written approval of Dürkopp Adler AG.
Copyright © Dürkopp Adler AG 2018
Table of Contents
1 General information ...................................................................3
1.1 Components of the kit...................................................................3
1.2 Kits for M-TYPE PREMIUM..........................................................5
2 Assembling the remaining thread monitor .............................. 6
2.1 Assembling the remaining thread monitor....................................6
2.2 Connecting the remaining thread monitor ....................................7
2.2.1 Connecting the remaining thread monitor
on Classic machines.....................................................................7
2.2.2 Connecting the remaining thread monitor
on PREMIUM machines ............................................................. 10
2.3 Setting the remaining thread monitor electrically........................ 12
2.4 Software settings........................................................................14
2.4.1 Parameter settings for classes 867 and 867-M..........................14
2.4.2 Parameter settings for class 867-M PREMIUM..........................16
Additional Instructions 867/867-M PREMIUM - 00.0 - 07/2018 1
Table of Contents
2 Additional Instructions 867/867-M PREMIUM - 00.0 - 07/2018
General information
1 General information
The remaining thread monitor (RTM) can be used with all 1-needle and
2-needle machines equipped with a thread cutter.
1.1 Components of the kit
Check whether the scope of delivery for the kit is correct prior to installation.
The different kits for the remaining thread monitor differ in some parts, which
are listed separately below.
Part number Quantity Description
0667 155824 1 RTM carrier
0699 979265 1 Hose PUR, 0.9 m
9840 120106 3 Cable holder
9815 925002 1 Light barrier
9850 867003 1 Circuit board
9870 867003 1 Cable (RTM cable machine head)
9870 367003 1 Cable (367 valve)
0667 155840 1 Holder
9204 201667 8 Pan-head screw M4x10-H
9830 501010 4 Spacer
9710 900031 1 Connection plate
091 1 000478 1 O-ring
0999 240389 1 Hose connector
9203 003097 2 Cylinder-head bolt M3x16
9204 200517 2 Pan-head screw M2x20-H
9710 061200 1 Magnet valve
0667 155930 1 Cover
9203 003157 2 Cylinder-head bolt M3x30
9710 982003 1 Silencer
9840 121002 3 Cable tie
9840 120025 2 Mounting clip
0791 867720 EN 1 Additional Instructions
Kit 0867 590104
9202 002077 1 Cylinder-head bolt M4x10
0767 150170 3 Bobbin
0867 150240 3 Bobbin
Additional Instructions 867/867-M PREMIUM - 00.0 - 07/2018 3
Part number Quantity Description
0867150170 1 Compression spring
0570 001847 1 Blanking plug
9203 003177 2 Cylinder-head bolt M3x40
9231 000347 2 Hexagon nut
Kit 0867 590114
0667 156014 1 Bobbin case
0667 155614 1 Bobbin case
9202 002078 1 Cylinder-head bolt M4x10
0667 150880 3 Bobbin
0867 150560 3 Bobbin
0867 150170 1 Compression spring
0570 001847 1 Blanking plug
General information
9203 003177 2 Cylinder-head bolt M3x40
9231 000347 2 Hexagon nut
Kit 0867 590124
9202 002077 2 Cylinder-head bolt M4x10
0767 150170 6 Bobbin
0867 150240 6 Bobbin
9790 030020 1 Y-connection
0667 155594 2 Bobbin case
0867 150170 2 Compression spring
Kit 0867 590134
0667 156014 2 Bobbin case
0667 155614 2 Bobbin case
9202 002078 2 Cylinder-head bolt M4x10
0667 150880 6 Bobbin
0867 150560 6 Bobbin
9790 030020 1 Y-connection
0867 150170 2 Compression spring
4 Additional Instructions 867/867-M PREMIUM - 00.0 - 07/2018
Loading...