Page 1
Toilet floorstanding for SensoWash®Toilet floorstanding for SensoWash® DimensionDimension WeightWeight Order numberOrder number
back-to-wall, washdown model, hardware included, horizontal
outlet, only in combination with SensoWash, connecting
elements for SensoWash with concealed connections included,
cUPC listed
ColorsColors
00 White 20 HygieneGlaze (an antibacterial ceramic glaze that
provides almost indefinite effectiveness)
VariantVariant
© 1.6/0.8 gpf
14 5/8" x 23 5/8" Inch 63.9 lb 216959..92
InfoboxInfobox
In-wall tank and actuator plate are required for installation / Refer to page XXX
Sanitary ceramics with the special WonderGliss surface finish will remain clean and attractive-looking for a long
time to come.
When ordering WonderGliss please add a "1" as eleventh digit to the model number.
Connecting set in combination with SensoWash 100691
Pre-installation set in combination with SensoWash, for in-wall
carrier with horizontal support without shower toilet preinstallation/condiut pipe
005072
Vario connector set incl. offset Ø 4 3/8" Inch 3.3 lb 001422
Suitable productsSuitable products
ME by Starck Toilet floorstanding for SensoWash® # 216959..92 |< 14 5/8" Inch >|
Page 2
SensoWash Slim shower-toilet seat for ME by Starck, Starck 2,
Starck 3 and Darling New* with concealed connections, remote
control included, locking function via remote control, rear-,
front and oscillating wash, self-cleaning wand, with slow close,
night light, seat and lid easily removable with one hand,
automatic drainage in periods of prolonged disuse, on / offbutton, 14 3/4" x 21 1/4" Inch
14 3/4" x 21 1/4" Inch 611000
All drawings contain the necessary measurements which are subject to standard tolerances. They are stated in inch & mm and are nonbinding. Exact measurements, in particular for customized installation scenarios, can only be taken from the finished ceramic piece.
ME by Starck Toilet floorstanding for SensoWash® # 216959..92 |< 14 5/8" Inch >|
Loading...