Durapac HC-45C Instruction Manual

Maximum Operating Pressure – 700 bar

Instruction Manual

Self-Contained Hydraulic Cutter
Model – HC-45S

ABSO LUTE EQUI P M ENT PTY LT D – 2 /186 Granite Street, GEEBUNG QL D 4034 – A u stralia

sale s @abs o l utee q uipme nt.co m .au – P hone : [phone] – Fax: + 61 7 3 102 6288

Instruction Manual

This is a safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid injury or death

1.0 Product Information

DURAPAC – Hydraulic cutters are engineered to meet Industrial Standards for Performance and
Safety. The HC-45S is a self-contained cutter with a spring return and a 180° rotating head. They are
compact, lightweight, easy to use and supplied in a heavy duty canvas carry bag. They feature
superior guillotine-type cutting, flip-top latch for easy insertion of cutting material and blades that
are easily replaceable.

The HC-45S cuts with ease though cable, round bar, wire rope, wire strand and more. It is a proven
performer in the electrical, railway, mining, manufacturing and construction industries.

Note – the cutting of piano wire is prohibited.

Figure 1 – HC-45S Subassembly

Special skill, knowledge and training may be required for a specific task and the product may not be
suitable for all jobs. The user must ultimately make the decision regarding suitability of the product
for any given task and assume the responsibility of safety for all in the work area. Contact a Durapac
representative if you are unsure of your hydraulic cutter’s suitability for a particular application.

2.0 Receiving Instructions

It is recommended prior to use that an inspection be done by qualified personnel and that any
missing or damaged parts, decals, warning/safety labels or signs are replaced with Durapac
authorised replacement parts only. Any hydraulic cutter that appears to be damaged in any way, is
worn, leaking or operates abnormally should be removed from service immediately until such time
as repairs can be made. Any hydraulic cutter that has been or suspected to have been subject to a
shock load should be removed from service immediately until inspected by a Durapac authorised
service centre. Owners and operators of this equipment should be aware that the use and
subsequent repair of this equipment may require specialised training and knowledge.

HC-45S SC Cutter - V1.1 www.durapac.com Page 2 of 10

Instruction Manual

DANGER:

 To avoid personal injury keep hands and feet away from work area during operation

WARNING:

 Always wear appropriate personal protective equipment (PPE) when operating

hydraulic equipment. The operator must take precaution against injury due to failure
of the tool or work piece(s)

IMPORTANT:

 If at any stage, the safety related decals become hard to read, these must be replaced

 Minimum age of the operator must be 18 years. The operator must have read and

understood all instructions, safety issues, cautions and warnings before starting to
operate the equipment. The operator is responsible for this activity towards other
persons

 Hydraulic equipment must only be serviced by a qualified hydraulic technician. For

repair service, contact the Durapac authorised service centre in your area. To protect
your warranty, use only high quality hydraulic oil

CAUTION:

 KEEP HYDRAULIC EQUIPMENT AWAY FROM FLAMES AND HEAT. Hydraulic fluid can

ignite and burn. Excessive heat will soften packings and seals, resulting in fluid leaks.
Heat also weakens hose materials and packings. For optimum performance do not
expose equipment to temperatures of 65°C (150°F) or higher. Protect all equipment
from weld spatter

 No alteration should be made to this device

3.0 Safety

Save these instructions. For your safety, read and understand the information contained within. The
owner and operator should have an understanding of this product and safe operating procedures
before attempting to use this product. Instructions and safety information should be conveyed in the
operator's native language before use of this product is authorised. Make certain that the operator
thoroughly understands the inherent dangers associated with the use and misuse of the product. If
any doubt exists as to the safe and proper use of this product as outlined in this factory authorised
manual, remove from service immediately.

3.1 Hydraulic Cutters

 Keep hands off the cutting head section while operating the product
 This product is NOT an insulator. Proper equipment should be used to avoid electrical

shock

 Do NOT keep this product in places with high temperatures, high humidity or direct

sunlight

 Suggested working temperatures -10°C to 40°C

HC-45S SC Cutter - V1.1 www.durapac.com Page 3 of 10