Durant-Eaton Eclipse Series, Courier Series, OEM Custom Data Sheet
54
August 2006
Eclipse Series Model Courier Series Model OEM Custom Model
Eclipse
Achieve optimum accuracy and
■
performance in measuring uncompensated volumetric fluid.
■
Available in two versions, a flow
totalizer/ratemeter and a local batch
control unit.
Gather information such as accumu-
■
lated flow total, instantaneous flow
rate and numerous batch control
functions (batch count read-out,
operator-entered batch preset, or
start/stop/resume valve control)
based on your needs.
■
All Eclipse models include:
3.62 x 1.77 inches (92 x 45 mm)
❑
standard 1/8 DIN panel cutout
❑
9 – 30V DC or 85 – 265V AC power
supply available
❑
NEMA 4X rated
❑
UL, cUL listed, CE marked
Note: Refer to Eclipse Flow Model Numbers
Catalog Number Selection Table on
for Model Numbers.
Page 54-2
Counters, Panel Meters, Tachometers & Timers
Flow Measurement & Control
Eclipse Series, Courier Series and OEM Custom — Durant
Courier
Trademark compact Courier design.
■
■
High visibility, 8-character backlit LCD
display and large, 0.45 inch (11.4 mm)
characters.
Provides scaled rate and total func-
■
tions. Programmable decimal point
and a 1/Tau ratemeter. Available
with reed switch input or magnetic
pickup input.
■
All Courier Series models include:
❑
2.67 x 1.30 inches (68 x 33 mm)
DIN standard panel cutout
Self-powered, with user replace-
❑
able 3V lithium battery
❑
NEMA 4X rated
❑
CE marked
Note: Refer to Page 54-7 for Order
Numbers.
OEM Custom Totalizers and
Controls
Basic hardware sets for flow total/
■
rate, batch control and mass flow
computing.
■
Accepts analog or digital inputs.
Two relays, five transistors and
4 – 20 mA outputs. Hardware and/or
firmware modifications will be
customized to fit the application.
■
OEM name and logo on front label
(models are proprietary to the
OEM). Other count/rate-based OEM
applications are welcome.
All OEM Custom Totalizer and Control
■
models include:
❑
❑
❑
❑
Note: Contact factory for assistance in
developing your custom control or totalizer.
5.43 x 2.67 inches (138 x 68 mm)
standard cutout dimension
120/240V AC power in
NEMA 4 front panel, CSA listed
16 character alpha numeric,
vacuum fluorescent display
®
54-3
CA08102001E For more information visit: www.EatonElectrical.com
54
54-2
Counters, Panel Meters, Tachometers & Timers
Product Family Overview
Eclipse Series — Durant
Application Description
Eclipse — The Ultimate Product
Perfectly Designed for These
Multiple Uses
Flow Measurement and Control
Flow total and rate, batch control and
flowmeter signal conditioning, as a
stand-alone display or controller, or as
a component in a PC- or PLC-based
system.
Digital Panel Metering
Scalable tachometry from 0 – 10V or
4 – 20 mA drive input, motor current
and voltage current readout, as a local/
remote display or as a signal isolator,
with max./min. capture and hold and
alarm outputs.
Temperature Indication
Motor temperature display with overtemp alarms. TC or RTD readout and
temperature sensor to 0 – 10V and
4 – 20 mA process signal conversion.
Counting
Product totalization, length, measurement, single-axis positioning, cut to
length and product lot batching.
Rate Metering
Scalable tachometry from a digital
sensor input, motion detection and
production rate. Process time for baking,
annealing and injection molding
machinery. Either function with hi/low
alarms and analog 0 – 10V and 4 – 20 mA
retransmission.
®
August 2006
Dimensions
Figure 54-1. Eclipse Series Model — Approximate Dimensions in Inches (mm)
Catalog Number Selection
Table 54-1. Eclipse Digital Panel Meter, Counter and Ratemeter Model Numbering System
Output Option
0 = No Option
1 = Dual Relay
2 = Analog
(4 – 20 mA and 0 – 10V)
3 = Dual Relay, Analog
4 – 20 mA and 0 – 10V)
4 = RS-485 Communications
5 = Dual Relay, RS-485
6 = Analog, RS-485
(4 – 20 mA and 0 – 10V)
7 = Dual Relay, Analog, RS-485
(4 – 20 mA and 0 – 10V)
Power Supply
0 = DC (9 – 30V DC)
1 = AC (85 – 265V AC)
5 7 7 0 X - 4 X X
Input Option
0 = DC Volt
1 = AC Volt TRMS
2 = DC Amp
3 = AC Amp TRMS
4 = 5A AC TRMS
5 = Process
(4 – 20 mA, 0 – 10V, 1 – 5V)
6 = Temperature
(J, K, T, Pt100 RTD)
7 = Rate
8 = Count
Features
■
1/8 DIN Cutout
NEMA 4X Front Panel
■
■
Universal AC Power Supply
(85 – 265V AC)
■
DC Power Models (9 – 30V DC)
Removable Screw Terminals
■
Short Depth: 3.6 inch (91 mm)
■
■
Front Panel Programming
10 Digit Totalizer (5775X models)
■
■
UL, cUL listed, CE marked
Output options 0, 2, 4 and 6 are not available for models -41X and -43X.
Table 54-2. Eclipse Flow Model Numbering System
5 7 7 5 X - 4 X X
Power Supply
0 = DC (9 – 30V DC)
1 = AC (85 – 265V AC)
Output options 0, 2, 4 and 6 are not available for models -41X and -43X.
For more information visit: www.EatonElectrical.com
Input Option
0 = Pulse-Input
Totalizer/Ratemeter
1 = Pulse-Input Batch Control
2 = Analog-Input
Totalizer/Ratemeter
3 = Analog-Input Batch
Control
Output Option
0 = No Option
1 = Dual Relays
(Standard on Batch)
2 = Analog Output
(4 – 20 mA and 0 – 10V)
3 = Dual Relays and
Analog Output
4 = RS-485 Communications
5 = Dual Relay and RS-485
6 = Analog Output and RS-485
7 = Dual Relays, Analog Output
and RS-485
A = One Relay, One Transistor
B = One Relay, One Transistor,
Analog Out
C = One Relay, One Transistor,
RS-485
D = One Relay, One Transistor,
Analog Out and RS-485
CA08102001E
Loading...