Durant-Eaton Ambassador Series Data Sheet
April 2007
Counters, Panel Meters, Tachometers and Timers
Count Control
Ambassador Series — Durant
®
43
Cat. No. 57601401
Features
■ AC/DC powered, 2-line LCD display
■ 8-digit totalizer
■ 1/Tau ratemeter
■ Totalizer and ratemeter scaling
■ Four user-configurable control
inputs
■ Up to two output relays
■ Two solid-state outputs
■ RS-485 Serial communications
■ Feet/Inches control available
Standards and Certifications
■ UL Listed
■ CE Marked
Technical Data and
Specifications
Power Input
■ AC Operation —
❑ 115V AC (±15%) std., 50 to 60 Hz,
7W
❑ 230V AC (±15%) opt., 50 to 60 Hz,
7W
■ DC Operation: 10 – 15V DC opt.,
300 mA maximum
DC Power Output
■ 12V DC (±25%), 100 mA maximum
(includes all line and load variations)
Environmental
■ Operating Temperature: 32 to 131°F
(0 to 55°C)
■ Storage Temperature: -4 to 158°F
(-20 to 70°C)
■ Operating Humidity: 85% Relative,
non-condensing
■ NEMA 4 rating when mounted with
gasket provided
Main Counter
■ Type: Bi-directional
■ Digits: 6
■ Presets: Varies by Model
■ Reset modes: Auto or manual reset
to zero or preset
■ Scaler Range: 0.00001 to 9.99999
■ Decimal Point: 5 positions, (6 on 4-
preset models)
■ Output Latency: See Table 40
Batch Counter
■ Type: Increment with main counter
recycle or final preset signal
■ Digits: 6
■ Presets: 1
■ Output Latency: < 1 mS
Totalizer
■ Type: Bi-directional, same or
opposite of main counter
■ Digits: 8
■ Scaler: Shared with main counter
■ Decimal Point: Tracks main counter
Count Input Speeds
■ See Tables 42 and 43
Count Inputs
■ Sink —
❑ Impedance: 4.6k ohms to +5V DC
❑ Voltage —
High: 3.5 to 34.0
Low: 0.0 to 1.9V DC
■ Source (high) —
❑ Impedance: 2.3k ohms to
common
❑ Voltage —
High: 3.5 to 17.0V DC (100% duty
cycle)
Low: 0.0 to 1.9V DC
■ Source (low) —
❑ Impedance: 2.3k ohms to
common
❑ DC Voltage —
High: 0.6 to 17.0V DC
Low: -17.0 to -0.6V DC
❑ AC Voltage: 17V AC (48V Peak-
Peak) maximum
Control Inputs
■ Impedance: 4.7k ohms to +5V DC
■ Voltage —
❑ High: +3.7 to +24V DC
❑ Low: 0.0 to 0.9V DC
❑ Response: Minimum low 15 mS,
minimum high 15 mS
Relay Outputs
■ Type: SPDT contacts
■ UL Ratings: 250V AC, 360V A Pilot
Duty
Transistor Outputs (2)
■ Type: NPN open collector with tran-
sient protection
■ Maximum Voltage (OFF state):
30V DC
■ Maximum Current (ON state):
200 mA @ 1.3V DC
Communication
■ Type: RS-485
■ Format: 1 start bit, 7 data bits
(ASCII), 1 parity bit, 1 stop bit
■ Protocol: Opto-22 compatible
■ Speed: 300, 1200, 2400, 4800, 9600
and 19200 baud
■ Parity: Odd, Even, None (space
transmitted, ignore received)
Rate Indicator (Not available on models
57601-415 and 57601-485)
■ Type: 1/Tau
■ Digits: 6
■ Presets: 2
■ Scaler Range: 0.00001 to 99999
■ Decimal Point: 5 positions,
programmable
■ Accuracy: ±0.015% of reading
■ Update Time: See Table 41
■ Zero Time: See Table 41
Connections
■ Type: Dual depluggable screw
terminal strips
■ Conductor Size: 14 – 22 AWG
(2.1 – 0.38 mm
2
), 600V, solid,
stranded, or fused (preferred)
PG05400001E For more information visit: www.eaton.com
44
Counters, Panel Meters, Tachometers and Timers
Count Control
Ambassador Series — Durant
®
April 2007
Table 40. Output Latency for Ambassador Control
Style Number Output Latency
5760X401
5760X402
5760X403
5760X404
5760X405
5760X415
0.7 to 2 mS
0.7 to 2 mS
0.7 to 2.7 mS
0.7 to 2.7 mS
< 1 mS
< 1 mS
Table 41. Rate Indicator Specs for Ambassador Control
Style Number Update Time Zero Time
5760X401
5760X402
5760X403
5760X404
5760X405
5760X415
1 second, fixed
1 second, fixed
1 second, fixed
1 second, fixed
0.1 to 99.9 sec,
programmable
0.1 to 999.9 sec,
programmable
10 seconds, fixed
10 seconds, fixed
10 seconds, fixed
10 seconds, fixed
0.1 to 99.9 sec,
programmable
0.1 to 999.9 sec,
programmable
Table 42. Ambassador Count Input Speeds — 5760X405, 5760X415
Solid-State A or B A and B
A - B
A + B
-A + B
A, B Dir
2A, B Dir
A, B Rst
Quad x 1
Quad x 2
Quad x 4
Tot A/Cnt B
Tot + Cnt B
Contact inputs = 40 Hz; B Direction inputs = 40 Hz and B Reset input =
10 μS Min. Low. Input A not active on Feet/Inches control.
8250/8250
8250/8250
8000/8000
8000/40
4500/40
8250
—
—
—
14000/9000
16000/8500
3000/3000
4000/4000
3000/3000
—
—
—
3250
3250
2000
6500/6500
6500/6500
Table 43. Ambassador Count Input Speeds — 5760X401, 5760X402,
5760X403, 5760X404
Mode
Input A/B
Add/Sub
Add/Add
Count/Direction
Count x 2/Direction
Quadrature
Quadrature x 2
The maximum count speed depends on the selected count mode. All
maximum speeds are shown with square waves (50% duty cycle)
input.
Maximum Speed
Solid-State
(High Speed)
20 kHz
20 kHz
15 kHz
7.5 kHz
6.5 kHz
6.5 kHz
Contact
(Low Speed)
40 kHz
40 kHz
40 kHz
—
—
—
For more information visit: www.eaton.com PG05400001E
Loading...