DuraMax 26063 Owner's Manual

TM

16’’ (40.6cm) REEL MOWER

Item: 289516
Model: 26063

TOLL FREE HELPLINE:1 866 456-8934

IMPORTANT:

Read and follow all safety rules and operating instructions

Owner's Manual

before using this product.

TABLE OF CONTENTS

PRODUCT SPECIFICATIONS
SAFETY INFORMATION

………………………………………………………………………………….…………..…………………3

CARE AND MAINTENANCE

ASSEMBLY INSTRUCTIONS

………

…………………………………………………………………………….…………..………………….3

………………………………………………………………………….…………..……………….4/6

CUTTING HEIGHT ADJUSTMENT
BLADE ADJUSTMENT

………………………………………………………………….…………..…………....…....................7

CHECKING THE ADJUSTMENT

TWO-YEAR LIMITED WARRANTY
PARTS DIAGRAM

……………………………………………………………………………………………….…………..……10/11

………………………………………………………………….…………..…………………2

………………………………………………………………….…………..…………....…..

……………………………………………………………….…………..……………..........……8

…………………………………………………………………….…………..………………..9

7

PRODUCT SPECIFICATIONS

16’’ (40.6cm) REEL MOWER

Item No.
Cutting
Hei
Wh
Wei

…………………………………………………………………………….…………..……………………………

…………………………………………………………………………….…………..……………….....

Path
ght Adjustments
eel Qty.

ght

…………………………………………………………………………….…………..……………………………..…

…………………………………………………………………………….…………..…………...............

…………………………………………………………………………….…………..

289516

’’ (40.6cm)

16

1 - 2-1/8’’ (2.5-5.3cm)

2

28.4lb (12.8Kg)

2

SAFETY INFORMATION

Never place hands, fingers or feet inside the reel. Although a motor does not power this mower, when the wheels turn
the reel spins and can cut.
Never mow when grass is wet as it can be slippery.
Do

not use the reel mower while barefoot or while wearing sandals.
Walk behind, never run, while using reel mower. Always make sure of your footing when using this reel mower.
Never intentionally strike or hit trees, fences, etc. This can cause injuries or severely damage the reel mower
mec

hanisms.
Make sure your reel mower is in a safe operating condition. Do not attempt to operate this reel mower if damaged.
Contact customer service or have the reel mower repaired by a qualified repair service provider before using.

CARE AND MAINTENANCE

1. Minimum care is required to ensure smooth operation of your mower.

2. To avoid damage to mower or cutting blades, keep area to be mowed free from debris.

3. For best results, regularly apply lubricant to mower’s cutting surfaces, cutting reel axle shaft and wheels.

WARNING: Clean any grinding compound or debris from the cutter bar

blade, reel blade, pinions and pawls.

Sharpening the cutting blades:

1. Spread a thin layer of lapping compound on the front edge of the reel blades.

2. Adjust the cutter bar so that the blade has light but firm contact across the full width of the cutter bar.
Caution: Do not overtighten the adjusting screws, as this could damage the cutter bar. Tighten both screws

during final adjustment.

3. Turn the reel blades until the front edge of the cutter bar blade is polished.

NOTE: Clean any grinding compound or debris from the cutter bar blade, reel blade, pinions, and pawls.

E: Use industrial or valve lapping compound between 100 and 240 grit. Lubricate the axle and pinion with a light film

NOT

wheel bearing grease.

of

Cleaning and Storage:

1. Clean the exterior of the machine thoroughly using a soft brush and cloth before storing. Do not use water, solvents
polishes.

or

2.

Turn the mower on its side to clean the blade area.

WARNING: Do not place hands in the mower near blades. If grass cuttings are compacted in the blade area,
remove using a wood or plastic cleaning tool appropriate for the cleaning of the blades.

3.

Store the mower in a dry place. Do not place other objects on top of the mower during storage.

3

ASSEMBLY INSTRUCTIONS

Before attempting to assemble, empty carton and compare parts with parts list below.

Note:

• Carefully remove the parts from the box.

• Inspect the parts to make sure no breakage or damage occurred during shipping.

• Do not discard the packing material until all parts are examined.

• If any parts are damaged or missing, please call 1-866-456-8934 for assistance.

•

Be sure to tight the lock nuts when assembled to prevent the handle from rocking.

PACKING LIST
1-Top handle,
2-Center handle pieces,
2-Lower handle pieces,
8-Locknuts,
8-Carriage Bolts,
8-Washers,
1-Reel mower body

1. Top handle

2. Center ha

3. Left lower

4. Right

5. Foam

6.

7. Flat

8.

lower handle

grip

Carriage Bolts,

washer

Locknuts

Tools Required

10mm Wrench

ndle pieces

handle

(Not includ

e

d)

Fig. 1

4