DuPont Authentication H - 65190 User Manual

H - 65190

DuPont

herbicide

™

Velpar

“.........

A Growing Partnership With Nature”

TABLE OF CONTENTS

Active Ingredient. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Precautionary Statements . . . . . . . . . . . . . . . . . . . . . . . 1

General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Environmental Conditions and Biological Activity. . 2

Application Information . . . . . . . . . . . . . . . . . . . . . . 2

Tank Mixtures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Resistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Integrated Pest Management . . . . . . . . . . . . . . . . . . . 3

Directions For Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Agricultural Uses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Agricultural Use Requirements . . . . . . . . . . . . . . . . . 3

Alfalfa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Blueberry. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Christmas Trees. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Pineapple . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Sugarcane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Hawaii . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Louisiana . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Puerto Rico . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Texas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Forestry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Site Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Grid Application . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Basal (Soil) Single Stem . . . . . . . . . . . . . . . . . . . . . 14

Release . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Grid Application . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Basal (Soil) Single Stem . . . . . . . . . . . . . . . . . . . . . 16

Impregnation on Dry Bulk Fertilizer . . . . . . . . . . . . 17

Yellow Poplar Plantings . . . . . . . . . . . . . . . . . . . . . . . 18

Pasture / Rangeland. . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Bermudagrass / Bahiagrass Pastures . . . . . . . . . . . . 18

Non-Ag

Non-Cr

Storage and Disposal. . . . . . . . . . . . . . . . . . . . . . . . . . 24

Notice to Buyer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Limitation of Warranty and Liability . . . . . . . . . . . . . 25

ricultural Uses . . . . . . . . . . . . . . . . . . . . . . . . 20

Non-Agricultural Use Requirements . . . . . . . . . . . . 20

op Industr

Industrial Turf (Unimproved Only) . . . . . . . . . . . . . 21

Brush Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

ditional Use Inf

Spray Drift Management . . . . . . . . . . . . . . . . . . . . . 23

Spray Tank Clean Out . . . . . . . . . . . . . . . . . . . . . . . 24

ial Sites

ormation . . . . . . . . . . . . . . . . . . . . 23

. . . . . . . . . . . . . . . . . . . . . .

™

DuPont Velpar®DF

herbicide

Dispersible Granules

Active Ingredient By Weight

Hexazinone

[3-cyclohexyl-6-(dimethylamino)

-1-methyl-1,3,5-triazine-2,4(1H,3H)-dione] 75%

Inert Ingredients 25%

TOTAL 100%

EPA Reg. No. 352-581

KEEP OUT OF REACH OF CHILDREN

DANGER PELIGRO

Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detalle. (If you do not understand this label, find someone to explain it to you in detail.)

FIRST AID

IF IN EYES: Hold eye open and rinse slowly and gently with water for 15-20 minutes. Remove contact lenses, if present, after the first 5 minutes, then continue rinsing eye. Call a poison control center or doctor for treatment advice.

IF ON SKIN OR CLOTHING: T clothing. Rinse skin immediately with plenty of water for 15-20 minutes. Call a poison control center or doctor for treatment advice.

IF SWALLOWED: Call a poison control center or doctor immediately for treatment advice. Have person sip a glass

ter if a

of w told to do so b give anything by mouth to an unconscious person.

TE TO PHYSICIAN:Probable mucosal damage may

contraindicate the use of gastric lavage.

Have the product container or label with you when calling a poison control center or doctor, or going for treatment. You may also contact 1-800-441-3637 for medical emergencies involving this product.

wallow. Do not induce vomiting unless

le to s

y a poison contr

ake off contaminated

ol center or doctor. Do not

PRECAUTIONARY STATEMENTS

HAZARDS TO HUMANS

AND DOMESTIC ANIMALS

DANGER! CAUSES EYE DAMAGE.

Corrosive, causes irreversible eye damage. Harmful if swallowed. Do not get in eyes or on clothing. Avoid contact with skin. Wash thoroughly with soap and water after handling.

PERSONAL PROTECTIVE EQUIPMENT

Applicators and other handlers must wear:

Long-sleeved shirt and long pants. Shoes plus socks. Protective eyewear.

Discard clothing and other absorbent materials that have been drenched or heavily contaminated with this product's concentrate. Do not reuse them. Follow manufacturer's instructions for cleaning/maintaining PPE. If no such instructions for washables, use detergent and hot water.

eep and w

ash PPE se

ately from other laundry.

par

USER SAFETY RECOMMENDATIONS

USERS SHOULD: Wash hands before eating, drinking, chewing gum, using tobacco or using the toilet.

ENVIRONMENTAL HAZARDS

Do not apply directly to water, or to areas where surface

ter is present or to intertidal areas below the mean high

w water mark. Do not contaminate water when disposing of equipment w

The active ingredient, hexazinone, in this product is

wn to leach through soil into ground water under

kno certain conditions as a result of agricultural use. Use of this chemical in areas where soils are permeable, partic-

y w

ular

ound-water contamination.

ashw

e the water table is shallow, may result in

her

ter

GENERAL INFORMATION

DuPont™ VELPAR® DF herbicide is a water-dispersible

ranule that is mixed in water and applied as a spray for

g weed control in certain crops, Christmas trees, forestry site preparation and release areas, and industrial areas. It may also be applied as a basal soil treatment for brush control in reforestation areas, rangeland, pastures and noncrop areas.

VELPAR® DF is an effective general herbicide providing both contact and residual control of many annual and biennial weeds and woody plants. It is also effective for control of most perennial weeds.

VELPAR® DF is noncorrosive to equipment.

Caution should be exercised when applying VELPAR® DF near desirable trees or shrubs as they can absorb VELPAR® DF through roots extending in to treated areas.

This product may be applied on conifer plantations and noncrop sites that contain areas of temporary surface water caused by collection of water between planting beds, in equipment ruts, or in other depressions created by management activities. It is permissible to treat intermittent drainage, intermittently flooded low lying sites, seasonally dry flood plains and transitional areas between upland and lowland sites when no water is present. It is also permissible to treat marshes, swamps and bogs after water has receded, as well as seasonally dry flood deltas. DO NOT make applications to natural or man-made bodies of water such as lakes, reservoirs, ponds, streams and canals.

• Weed spectrum and size at time of application

Environmental conditions at and following treatment

•

Where a rate range is shown, use the higher levels of the dosage range on hard-to-control species, fine-textured soils, or soils containing greater than 5% organic matter or carbon. Use the

ower levels of the dosage range on coarse-textured soils and/or

l on soils low in organic matter. Refer to specific uses for rate ranges.

APPLICATION INFORMATION

VELPAR® DF may be applied by ground equipment and, where permitted, aerial equipment. Use rates, minimum spray gallonage, and other application information are described for various uses.

Dispose of the equipment washwater by applying it to a usesite listed on this label or in accordance with directions given in the “Storage and Disposal” section of this label.

Before spraying, calibrate equipment to determine the quantity of water necessary to uniformly and thoroughly cover the vegetation and soil in a measured area to be treated. Make sure the volume of water is sufficient to completely suspend the VELPAR® DF.

TANK MIXTURES

VELPAR® DF herbicide may be tank mixed with other herbicides and /or adjuvants registered for the uses (crops) specified in the label.

Refer to the label of the tank mix partner(s) for any additional use instructions or restrictions.

ENVIRONMENTAL CONDITIONS AND BIOLOGICAL ACTIVITY

VELPAR® DF is absorbed through the roots and foliage. Moisture is required to activate VELPAR® DF in the soil. Best results are obtained when the soil is moist at the time of application and 1/4–1/2 inches of rainfall occurs within 2 weeks after application.

For best results, apply VELPAR® DF preemergence or postemergence when weeds are less than 2 inches in height or diameter. Herbicidal activity is most effective under conditions

ture (above 80 °F), high humidity, and good soil

of high temper moisture dormant, semi-dormant, or under stress(e.g. temperature or moisture).

Herbicidal activity will usually appear within 2 weeks after application to susceptible plants under warm, humid conditions;

hile 4–6 weeks may be required when weather is cool or dry,

w or when susceptible plants are under stress. If rainfall after application is inadequate to activate VELPAR® DF in the soil, plants may recover from contact effects and continue to grow.

On woody plants, symptoms usually appear within 3–6 weeks after sufficient rainfall has carried the herbicide into the root zone during periods of active growth. Defoliation and subsequent refoliation may occur, but susceptible plants are killed.

The degree and duration of control will depend on the following:

• Use rate

. Herbicidal activity ma

y be reduced when vegetation is

RESISTANCE

When herbicides that affect the same biological site of action are used repeatedly over several years to control the same weed species in the same field, naturally-occurring resistant biotypes may survive a correctly applied herbicide treatment, propagate, and become dominant in that field. Adequate control of these resistant weed biotypes cannot be expected. If weed control is unsatisfactory, it may be necessary to retreat the problem area using a product affecting a different site of action.

o better manag

T proliferation and possible dominance of herbicide resistant

eed biotypes, it may be necessary to change cultural

w practices within and between crop seasons such as using a

omote the spr

icultur

te a

tion of tilla

icultur

combina and/or sequential herbicide applications that have a different site of action. W will pr

It is advisable to keep accurate records of pesticides applied to individual fields to help obtain information on the spread and dispersal of resistant biotypes. Consult your a sta specific alternative cultural practices or herbicide

ecommenda

e herbicide resistance through delaying the

etreatment, tank-mix partners

eed escapes that are allowed to go to seed

esistant biotypes.

ead of r

al dealer, consultant, applicator, and/or appropriate

epresentative for

xtension ser

al e

tions available in your area.

vice r

INTEGRATED PEST MANAGEMENT

This product may be used as part of an Integrated Pest Management (IPM) program that can include biological, cultural, and genetic practices aimed at preventing economic

est damage. IPM principles and practices include field

p scouting or other detection methods, correct target pest identification, population monitoring, and treating when target pest populations reach locally determined action thresholds. Consult your state cooperative extension service, professional consultants or other qualified authorities to determine appropriate action treatment threshold levels for treating specific pest/crop systems in your area.

DIRECTIONS FOR USE

It is a violation of federal law to use this product in a manner inconsistent with its labeling.

DuPont™ VELPAR® DF should be used only in accordance with recommendations on this label, or in supplemental DuPont

beling.

Do not apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers may be in the area during application. For any requirements specific to your state or tribe, consult the agency responsible for pesticide regulation.

The correct use rates by crop and geographical area, specified on the label, and proper mixing/loading site considerations and application procedures must be followed to minimize potential for hexazinone movement into ground water. Users are encouraged to consult with their state Department of Agriculture, Extension Service, or other pesticide lead agency for information regarding soil permeability, aquifer vulnerability, and best management practices for their area.

AGRICULTURAL USES

AGRICULTURAL USE REQUIREMENTS

Use this product only in accordance with its labeling and with the Worker Protection Standard, 40 CFR part 170. This Standard contains requirements for the protection of agricultural workers on farms, forests, nurseries, and greenhouses, and handlers of agricultural pesticides. It contains requirements for training, decontamination, notifi-

ation, and emergency assistance. It also contains specific

c instructions and exceptions pertaining to the statements on this label about personal protective equipment (PPE) and restricted-entry interval. The requirements in this box only apply to uses of this product that are covered by the Worker Protection Standard.

Do not apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers may be in the area during application.

Do not enter or allow worker entry into treated areas during the restricted entry interval(REI) of 24 hours.

PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves contact with anything that has been treated, such as plants, soil, or water, is :

Coveralls Chemical resistant gloves made of any waterproof

material Shoes plus socks Protective eyewear

ALFALFA

VELPAR® DF is recommended for control of certain weeds in established alfalfa grown for hay.

•

Do not apply within 30 days of harvest (cutting for hay), or feeding of forage or grazing.

•

Do not exceed 2 pounds per acre per application.

•

Do not exceed 2 pounds (1.5 pounds active ingredient hexazinone) per acre per year.

•

Do not use on alfalfa grown for seed in any state except California.

APPLICATION INFORMATION

NON-DORMANT AND SEMI-DORMANT V

In the following states, make a single application of VELPAR® DF during the winter months when alfalfa plants are in the least active stage of growth. Arizona Montana Oklahoma Washington

nia

Calif Colorado Nevada South Dakota Idaho New Me Kansas

wing sta

ollo

In the f VELPAR® DF either in the spring before new growth

xceeds 2 inches in height or to alfalfa stubble after cutting,

wing ha

ollo

f inches in height. Connecticut Maine New Hampshire Vermont

Delaware Maryland New Jersey Virginia Illinois Massachusetts New York West Virginia Indiana Iowa Minnesota Pennsylvania

entuc

y removal and before regrowth exceeds 2

ky Missouri Rhode Island

Nor

Mic

aska

xico

ota

th Dak

make a single application of

tes,

hig

gon Wyoming

exas

T Utah

Ohio

ARIETIES

Wisconsin

NOTE: Severe alfalfa injury may result following

application, if after cutting the regrowth is more than 2

nches high, or there is significant stubble left after cutting

i or grazing, or the air temperature is above 90 °F.

DORMANT VARIETIES

ake a single application of DuPont™ VELPAR® DF after

M alfalfa becomes dormant and before new growth exceeds 2 inches in height in the spring. Where weeds have emerged, use a surfactant.

USE RATES

Use higher rates on hard-to-control species, (see Weeds Controlled section below) fine textured soils, soils

containing greater than 5% organic matter, or under adverse environmental conditions such as temperature extremes or when weeds are stressed due to low rainfall.

For dormant alfalfa, use a surfactant approved for crops at the rate of 0.25% v/v (1 quart per 100 gallons of spray solution).

Select the appropriate rate for soil texture and organic matter content as follows:

VELPAR® DF (Lb/Acre)

Percent Organic Matter in Soil Soils <1% 1–5% >5% Coarse Texture

Loamy sand,

sandy loam 2/3 - 1 2/3 - 1 1 1/3 -2

Medium Texture

Loam, silt loam

silt, clay loam, sandy clay loam 2/3 - 1 1 - 2 1 1/3 - 2

FineTexture

Silty clay loam,

sandy clay, silty clay, clay 1 - 2 1 - 2 1 1/3 - 2

NOTE:

- In the states of MT, ND, SD, and WY, do not exceed a use rate of

1 1/3 pounds per acre on medium and fine textured soils.

- In the state of Montana (MT), do not apply to soils with less than

1.5% or In the sta

Do not appl A

ppl

anic ma

te of W

y to irr

tter

oming (WY):

y to soils with less than 0.5% org

ted alf

alfa onl

anic ma

tter.

WEEDS CONTROLLED

VELPAR® DF, when applied preemergence or early

ence at the following rates, is recommended for

postemer the control or suppr cr

1/3 - 2/3 Lb/Acre

wing species in alf

ession of the f

ollo

ops:

Tansymustard Descurainia pinnata

alfa

2/3 - 1 1/3 Lb/Acre

luegrass, annual

rome, downy (cheatgrass)

uckwheat, wild

atchfly, English

hamomile, mayweed (dogfennel)Anthemis cotula

hickweed, common

iddleneck, tarweed

ilaree

lixweed

roundsel, common

enbit*

ettuce, Miner’s

ustard, blue

ustard, Jim Hill (tumble)

ustard, wild

rchardgrass (seedling)

ennycress, field

P Pigweed, redroot Amaranthus retroflexus Radish, wild Raphanus raphanistrum Rocket, London Sisymbrium irio Rocket, common yellow Barbarea vulgaris Salsify Tragopogon spp. Shepherdspurse Capsella bursa-pastoris Speedwell, purslane Veronica peregrina Spurry, corn Spergula arvensis

oa annua

romus tectorum

olygonum convolvulus

ilene gallica

tellaria media

msinckia lycopsoides

rodium sp.

escurainia Sophia

enecio vulgaris

amium amplexicaule

ontia perfoliata

horispora tenella

isymbrium altissimum

rassica kaber

actylis glomerata

hlaspi arvense

1 1/3 - 2 Lb/Acre

Alfalfa* (seedling) Medicago sativa Barley, foxtail (seedling) Hordeum jubatum Bluegrass, perennial* (spring only) Poa spp Cockle, white* Melandrium album Dandelion, common* Taraxacum officinale Dandelion, false* (spotted catsear) Hypochaeris radicata Foxtail* Setaria spp Kochia Kochia scoparia Lambsquarters, common Chenopodium album Lettuce, prickly* Lactuca serriola Mallow, common Malva neglecta Ryegrass, Italian (annual) Lolium multiflorum Quackgrass* Elytrigia repens Speedwell, ivyleaf Veronica hederaefolia Tea, Mexican* Chenopodium

Thistle, Canada (seedling) Cirsium arvense Thistle, Russian Salsola iberica

Suppression - a visible reduction in plant population and/or

* plant vig accepted as control.

VELP

or as compared to an untreated area and generally not

AR® DF, when applied in late spring or after cutting

ambrosioides

at the following rates, will control these species listed below:

2/3 - 2 Lb/Acre

Crabgrass Digitaria spp Fleabane Conyza spp Foxtail Setaria spp. Jimsonweed Datura stramonium Lambsquarters, common Chenopodium album Pigweed, redroot Amaranthus retroflexus

SPRAY EQUIPMENT

y VELPAR® DF using a fixed boom power sprayer or

ppl

ial equipment.

aer

or ground applications apply in a minimum of 20 gallons

y air in a minimum of 5

of spr gallons.

y solution per acr

e and b

CHEMIGATION ALFALFA

Apply this product only through center pivot sprinkler irrigation systems. Do not apply this product through any other type of irrigation system.

rop injury, lack of effectiveness, or illegal pesticide

C residues in the crop can result from nonuniform distribution of treated water. Severe alfalfa injury may result following application after cutting if either the regrowth is more than 2” high or significant stubble is left after alfalfa cutting.

If you have questions about calibration, you should contact State Extension Service specialists, equipment manufacturers or other experts.

A person knowledgeable of the chemigation system and responsible for its operation, or under the supervision of the responsible person, shall shut the system down and make necessary adjustments should the need arise.

DORMANT APPLICATIONS

Select the appropriate rate (see Use Rates section) for soil texture and organic matter content using 0.25” to 0.75” of sprinkler irrigation as a continuous injection during the application. Best results are obtained when soil is moist at time of application, and when weeds have not germinated or are less than 2” tall or across.

APPLICATION AFTER CUTTING

Apply VELPAR® DF at 5.3 ounces per acre to stubble after cutting, following hay removal, and before regrowth exceeds 2” in height. Apply VELPAR® DF using 0.25” to

0.75” of sprinkler irrigation as a continuous injection during the application. Best results are obtained when soil is moist at time of application and when weeds have not germinated or are less than 2” tall or across. NOTE: Making an application when daily temperatures are forecast to be in the mid-to-high 90 degree range within 3 to 5 days after treatment may increase the potential for crop injury.

SPRINKLER CHEMIGATION

The system must contain a functional check valve, vacuum

elief valve, and low pressure drain appropriately located on

r the irrigation pipeline to prevent water source contamination

rom backflow.

f The pesticide injection pipeline must contain a functional, automatic, quick-closing check valve to prevent the flow of fluid back toward the injection pump. The pesticide injection pipeline must also contain a functional, normally closed, solenoid-operated valve located on the intake side of the injection pump and connected to the system interlock to prevent fluid from being withdrawn from the supply tank when the irrigation system is either automatically or manually shut down. The system must contain functional interlocking controls to automatically shut off the pesticide injection pump when the water pump motor stops. The irrigation line or water pump must include a functional pressure switch which will stop the water pump motor when the water pressure decreases to the point where pesticide distribution is adversely affected. Systems must use a metering pump, such as a positive displacement injection pump (e.g., diaphragm pump) effectively designed and constructed of materials that are compatible with pesticides and capable of being fitted with a system interlock.

MIXING INSTRUCTIONS

1. Fill the supply tank 1/4 to 1/3 full of water.

2. While agitating, add the required amount of VELPAR® DF and continue agitation until the VELPAR® DF is fully dispersed, at least 5 minutes.

3. Once the VELPAR® DF is fully dispersed, maintain agitation and continue filling tank with water. VELPAR® DF should be thoroughly mixed with water before adding any other material.

4. As the tank is filling, add tank mix partners (if desired). Follow use precautions and directions on the tank mix partner label.

After thorough mixing, the agitation system can be

stopped to prevent excessive foaming in the tank. Once thoroughly mixed the solution in the supply tank does not

equire additional agitation unless specified on the

r companion products label. If foaming occurs in the injection supply tank, a defoaming agent (defoamer) may

ded.

be ad

6. Apply VELPAR® DF spray mixture within 48 hours of mixing to avoid product degradation.

USE PRECAUTIONS - CHEMIGATION

•

Do not connect an irrigation system (including

eenhouse systems) used f

g public water system unless the pesticide label prescribed safety devices for public water systems are in place.

•

Distributing treated water in an uneven manner can result

op injur

in cr pesticide r the mixture is applied evenly at the recommended rate, use suf length of time and ensur

ter pa

y, lack of effectiveness, or over-tolerance

esidues in the cr

ficient water, apply the mixture for the proper

tter

or pesticide a

her

op.

inkler pr

e spr

pplication to a

ore, to ensure that

oduces a unif

orm

•

Do not permit run-off during chemigation.

POSTING OF AREAS TO BE TREATED

Posting of areas to be chemigated is required when 1) any part of a treated area is within 300 feet of sensitive areas

uch as residential areas, labor camps, businesses, daycare

s centers, hospitals, in-patient clinics, nursing homes, or any public areas such as schools, parks, playgrounds, or other public facilities not including public roads, or 2) when the

hemigated area is open to the public such as golf courses or

c retail greenhouses. Posting must conform to all the following requirements:

• Treated areas shall be posted with signs at all usual points of entry and along likely routes of approach from the listed sensitive areas. When there are no usual points of entry, signs must be posted in the corners of the treated areas and in any other location affording maximum visibility to sensitive areas.

• The printed side of the sign should face away from the treated area towards the sensitive area. The signs shall be printed in English. Signs must be posted prior to application and must remain posted until foliage has dried and soil surface water has disappeared. Signs may remain in place indefinitely as long as they are composed of materials to prevent deterioration and maintain legibility for the duration of the posting period.

• All words shall consist of letters at least 2 1/2 inches tall, and all letters and the symbol shall be a color which sharply contrasts with their immediate background. At the top of the sign shall be the words “KEEP OUT”, followed by an octagonal stop sign symbol at least 8 inches in diameter containing the word “STOP”. Below the symbol shall be the words “PESTICIDE IN IRRIGATION WATER”.

• Posting required for chemigation does not replace other posting and reentry requirements for farm worker safety.

REPLANTING (FOLLOWING ALFALFA)

• Do not replant treated areas to any crop except corn, root

crops or sugarcane within two years after treatment, as crop injury may result.

• Corn may be planted 12 months after the last treatment in

areas of moderate to high rainfall (greater than 20 inches), provided the use rate did not exceed 1 lb per acre.

• Root crops such as potatoes, sugarbeets, radish and carrots

may be planted 12 months after last treatment, provided the

te does not exceed 2/3 lb per acre. Sites with use

use r rates higher than 2/3 lb per acre should not be replanted to any root crop within 2 years after application of DuPont™ VELPAR® DF, or unacceptable crop injury may result.

eas where irrigation is needed to produce the crop, the

In ar

tion intervals listed may need to be extended if the

ota

op r

tion amount is r

normal ir

• Sugarcane may be planted any time following treatment.

• In California, do not replant seed alfalfa areas to any crop

within two years after treatment, as crop injury may result.

educed for any reason.

FLOOD IRRIGATED ALFALFA

In arid climates (10 inches of rainfall or less per year) or areas where drought conditions have prevailed for one or more years, a field bioassay should be completed prior to planting

ny desired crop. The results of this bioassay may require the

a rotation intervals listed above to be extended.

A successful bioassay means growing to maturity a test strip of the crop(s) intended for production. The test crop(s) strip should cross the entire field including knolls, low areas, and areas where any berms were located.

ALFALFA - IMPREGNATION ON DRY BULK FERTILIZER (EXCEPT CALIFORNIA AND ARIZONA)

Dry bulk fertilizer may be impregnated or coated with VELPAR® DF for application to established alfalfa. All recommendations on this label must be followed along with state regulations relating to dry bulk fertilizer blending, impregnating and labeling.

If fertilizer materials are excessively dusty, use a suitable additive to reduce dust prior to impregnation, as dusty fertilizer will result in poor distribution during application. The dry fertilizer must be properly impregnated and uniformly applied to the alfalfa to avoid crop injury and/or poor weed control.

To impregnate the fertilizer, use a system consisting of a conveyor or closed drum used to blend dry bulk fertilizer. Any commonly used fertilizer can be impregnated with VELPAR® DF, except potassium nitrate or sodium nitrate. Do not use VELPAR® DF on limestone.

Use a minimum of 250 lb dry bulk fertilizer per acre and up to a maximum of 450 lb per acre. To impregnate or coat the dry bulk fertilizer with VELPAR® DF, mix 2 2/3 pounds of VELPAR® DF with sufficient water to make one gallon of suspension and thoroughly agitate. Direct the nozzles to deliver a fine spray of this suspension toward the fertilizer for thorough coverage while avoiding spray contact with mixing

gnation of VELPAR® DF to dry

m impr

equipment. Unif bulk fertilizer will vary, and if the absorptivity is not adequate, the use of an a

free-flowing mixture. “Microcel E” is the recommended

dr absorbent powder. When another herbicide is used with

AR® DF, mix and impregnate the fertilizer

VELP immedia

Apply impregnated fertilizer as soon as possible after impreg-

or optimum performance.

tion f

Select the rate of VELPAR® DF to apply per acre from the appropriate section of this label. Then refer to the rate chart

w to deter

belo be impregnated on a ton of dry bulk fertilizer, based on the amount of fertilizer to be distributed in one acre.

ptive powder may be required to produce a

bsor

tely

mine the amount of VELPAR® DF that should

Rate Chart for Impregnating Fertilizer with DuPont™ VELPAR® DF

Fertilizer VELPAR® DF Rate Per Acre

Rate/Acre 2/3 Lbs 1 Lbs 1 1/3 Lbs 2 Lbs

250 lbs 5.3 lbs/ton 8.0 lbs/ton 10.6 lbs/ton 16.0 lbs/ton

300 lbs 4.4 lbs/ton 6.6 lbs/ton 8.8 lbs/ton 13.3 lbs/ton

350 lbs 3.7 lbs/ton 5.7 lbs/ton 7.5 lbs/ton 11.4 lbs/ton

400 lbs 3.3 lbs/ton 5.0 lbs/ton 6.7 lbs/ton 10.0 lbs/ton

450 lbs 2.9 lbs/ton 4.4 lbs/ton 5.9 lbs/ton 8.9 lbs/ton

For rates other than those listed, use the following formula to calculate the amounts of VELPAR® DF to be impregnated per ton of dry fertilizer.

Lbs Lbs

VELPAR® DF

Per acre

Lbs Fertilizer Per Acre

2000

= VELPAR® DF Per

Ton of Fertilizer

APPLICATION

Uniform application of VELPAR® DF-impregnated dry fertilizer is essential for satisfactory weed control. Accurate calibration of the application equipment is essential for uniform distribution to the surface. The recommended method of application is to apply 1/2 the recommended rate and overlap 50%. This results in the best distribution pattern.

USE PRECAUTIONS - ALFALFA

• Best results are obtained when 1/2–1 inches of rainfall or sprinkler irrigation occurs within two weeks after application, when soil is moist at time of application, and when weeds have not germinated or are less than 2 inches in height or diameter. Heavy rainfall or excessive irrigation after application may result in crop injury or poor performance of the herbicide.

On soils high in organic matter (greater than 5%), the

•

effectiveness of VELPAR® DF can be significantly reduced and w

•

Crop injury, including mortality, may result in fields with restricted root growth due to non-uniform soil profiles

h as gravel bases and clay lenses.

suc

•

Crop injury may result if hot weather, mid-to-high 90

ee r

de application.

• Do not apply to snow-covered or frozen ground.

• Since the effect of VELPAR® DF on alfalfa varies with soil

conditions, conditions, growers should limit their first use to small areas.

• If abnormally dry conditions exist following application,

restrict the first irrigation to no more than 1/2 acre inch of

ter.

• Temporary yellowing of alfalfa may occur following

VELPAR® DF applications.

• Treat only stands of alfalfa established for one year or for

one growing season (except in California), provided:

–The alfalfa stand has a well developed tap root structure

that is at least 10 inches in length (0.25 inch diameter

eed control may be unsatisfactory.

e or higher, occurs within a few days after

ang

ormity of application, and environmental

unif

below the crown) throughout the field and the crop is healthy, vigorous, and not under stress from weather

onditions, low fertility, insects or disease damage.

In areas with shorter growing seasons, such as, higher

–

elevations, adequate alfalfa tap root growth may not occur

nd especially when alfalfa is grown together with a cover

a or nurse crop. If an adequate tap root is not present, delay application of VELPAR® DF until the alfalfa has gone through a minimum of two growing seasons.

• In California, fall planted alfalfa may be treated in the following winter months with VELPAR® DF at 1/3 to 2/3 pounds per acre (use higher rate for fine textured soils) provided:

- alfalfa root growth exceeds 6 inches in length

- vegetative top growth of alfalfa has lateral development of

secondary growth

- alfalfa is healthy and vigorous, not growing under stress

from insect, disease, winter injury or other types of stress.

y may result to alfalfa plants that fail to meet these

Injur growth criterion listed above.

• Do not use VELPAR® DF on seedling alfalfa, alfalfa-grass mixtures, or other mixed stands as injury may result to the seedling alfalfa or companion crop.

• Do not use a surfactant with VELPAR® DF when treating non-dormant alfalfa.

• Do not use VELPAR® DF on gravelly or rocky soils, exposed subsoils, hardpan, sand, poorly drained soil, or alkali soils.

SEED ALFALFA (CALIFORNIA ONLY) ADDITIONAL USE PRECAUTIONS

• Do not use VELPAR® DF on fields with sandy loam or loamy sand soils having less than 1% organic matter.

• Do not exceed 2/3 pound per acre on fields with sandy loam or loamy sand soils having 1–2% organic matter.

• Do not exceed 2/3 pound per acre on seed alfalfa that has

or only one growing season.

lished f

been esta

BLUEBERRY

HIGH BUSH BLUEBERRIES

VELPAR® DF is recommended for control of certain herbaceous and woody weeds in established high bush

y fields.

ber

lue

APPLICATION INFORMATION

VELPAR® DF may be applied to high bush blueberries that have been established for 3 or more years. Apply

DF in the spring before blueberry leaf

VELP

ect the spray solution towards the soil and

. Dir

ence

emer weeds.

ound spray equipment, make the

ted g

Using calibr application in sufficient water to provide thorough and uniform coverage to the treated area (usually 20 gallons per

e). Shut of

acr or stopping, or injury to the crop may result.

f spray booms when starting, turning, slowing

+ 18 hidden pages