Duplo DUPRINTER DP-460e, DUPRINTER DP-440e, DUPRINTER DP-340e, DUPRINTER DP-330Le, DUPRINTER DP-430e Instruction Manual

For this machine to be used safely, it MUST be
operated correctly and serviced regularly. Therefore,
read this Instruction manual thoroughly before using
the machine.

Keep this manual in a safe place where it can be consulted at any time.

DUPLO CORPORATION

Instruction Manual

Ver.1

DP-460

/440 /430 /340 /330 /330L

i

Complies with the provisions defined by the regulations listed below.

EC Low Voltage Directive ( 73 / 23 / EEC )
EC Electromagnetic Compatibility Directive ( 89 / 336 / EEC )

ii

Thank you for your purchase of the

DUPRINTER DP- 460e/ 440e/ 430e/ 340e/ 330e/ 330Le

.

To ensure safe and efficient prolonged use of this machine, read and thoroughly unders

tand
this manual before using this machine.
After using this manual, be sure to keep it in a place to handy reference.

Introduction

Copyright 2004
DUPLO CORPORATION
All Rights Reserved

PLEASE NOTE

In the interest of upgrading our products, specifications and other data given in this
manual are subject to change without notice. If the manual contains anything that you
do not understand, contact the manufacturer for clarification.

Precautions for printing and duplicating

There are restrictions on what you may print on the printer.
Please be aware that there are some printed materials that are illegal
even to possess.

1. Printed matters banned by law

¡¡

Paper money, currency, government bonds and national and local
bonds cannot be duplicated, even if they are stamped with the
“sample” seal.

¡¡

Paper money, currency and bonds, etc. that are valid in foreign
country cannot be duplicated.

¡¡

Unused postage stamps and postcards cannot be duplicated

without governmental consent.

¡¡

Government-issued papers pertaining to stamps, liquor and sales
tax laws cannot be duplicated.

2. Printed Matter that Require Caution

¡¡

Printed-issued securities (stocks, bills and checks, etc.), passes
and tickets require caution in duplicating unless a business is
duplicating them for required number for their own business needs.

¡¡

Government-issued passports, public- and private-issued driver's
licenses, permits, IDs, passes, food stamps, etc. require caution in
duplicating.

3. Copyrighted materials
Books, music, artwork, prints, maps, diagrams, movies, photography,
etc. are banned from duplicating outside the limits of private home
use and their related non-sale usage.

iii

Notes on Safety (Please Read and Observe)

S

Safety Precautions

Examples of Pictorial Symbols

A circle with a line through it indicates a prohibited action.

The particular act prohibited is indicated by a picture inside the circle.
(In the example shown here, the prohibited act is disassembly.)

A black disc indicates an instruction, or sometimes a prohibited action.
The instruction itself is indicated by pictorial symbols drawn in white on the disc.
(In the example shown here, the instruction is remove the plug from the outlet.

)

¡¡

If the machine is used after foreign matter (metal fragments, water, or

liquid) has entered the machine, this may result in fire or electric shock.

aa

Turn the main unit's power switch OFF, and then remove the power

plug from the outlet.

Contact the sales distributor.

¡¡

If the machine is used after heat, smoke, strange smell, or other

abnormality is detected, this may result in fire or electric shock.

aa

Turn the main unit's power switch OFF, and then remove the power

plug from the outlet.

Contact the sales distributor.

¡¡

Do not insert or drop metal, flammable material, or other matter through

the ventilation holes into the machine interior.

aa

Doing so may result in fire or electric shock.

¡¡

Do not place flower vases, flowerpots, cups, or water containers

(including metal containers) on top of the machine.

aa

Fire or electric shock may result if liquid spills inside the machine.

WARNING

s

Precautions for use

Various symbols and pictures are used in this manual and on the stickers affixed to the
machine. These symbols and pictures provide warnings and instructions to prevent
danger to you or other personnel, and to prevent damage to office property.
The meanings of these symbols and pictures are explained below.

Indicates a high degree of potential danger. If the warning is ignored,
death or serious injury may result.

Indicates a medium degree of potential danger. If the caution is ignored,
medium injury or damage to property may result.

WARNING :

CAUTION :

Notes on Safety (Please Read and Observe)

iv

WARNING

¡¡

Use only the power cord that is provided among the accessories.
Insert the power cord plug firmly into the socket, so that proper
electrical contact is effected.

aa

Use of any other power cord could result in imperfect grounding.
If grounding is imperfect and electrical leakage occurs, fire or electric
shock could result.

¡¡

Do not use a source voltage other than that specified.
Do not connect two or more loads to a single outlet.

aa

Doing so may result in fire or electric shock.

¡¡

Do not remove or insert the power plug with wet hands.

aa

Doing so may result in electric shock.

¡¡

Do not damage, break, or modify the power cord.
Do not place heavy objects on, tug, or unnecessarily bend the power cord.

aa

Doing so may result in fire or electric shock.

WARNING

s

Caution for Power Supply and Power Cord

¡¡

Remove the power plug itself, not the cord.

aa

Tugging the cord may damage it (expose conductors, or cause
disconnections, etc.), resulting in fire or electric shock.

CAUTION

Notes on Safety

s

Caution for Grounding ( Be sure to use the supplied power cord )

Notes on Safety (Please Read and Observe)

v

¡¡

Do not modify the machine.

aa

Doing so may result in fire or electric shock.

¡¡

Do not remove the rear lid, cabinet, or covers from the machine.

aa

The inside of the machine contains high-voltage parts, which may cause

electric shock.

WARNING

s

Prohibition of Disassembly or Modification

¡¡

Do not place the machine in a humid or dusty area.

aa

Doing so may result in fire or electric shock.

¡¡

Once the machine is in position, secure in place using the casters.

aa

If the machine falls over, this could result in personal injury.

s

Caution for Location

¡¡

Before moving the machine, remove the power plug from the outlet.

aa

If the cord is damaged, this may result in fire or electric shock.

¡¡

Do not place the machine in an unstable position, such as on an

unsteady support or sloping area.

aa

If the machine is dropped or falls over, this could result in personal injury.

WARNING

CAUTION

¡¡

Do not place the machine in a place subject to direct sunlight or heating

equipment such as a stove.

aa

It may degrade ink quality and affect printing. The machine also may malfunction.

¡¡

Avoid placing the machine in a place subject to high or low temperature

or high humidity.

aa

The paper absorbs moisture and it may cause paper jam or wrinkles.

Notes on Safety (Please Read and Observe)

vi

Notes on Safety

¡¡

Keep the WARNING and CAUTION stickers clean at all times. If stickers become damaged or
come off, replace them with new ones.

s

Locations of warning stickers

2

r

M7-T3060

View A

M7-T3060

CAUTION

WARNING

Do NOT put hands inside machine
while it is operating.
Hands could get caught up
or crushed.

WARNING

● Do not remove this cover. The inside of the printer contains movable cutting instruments,
contact with which could result in injury.

L5-T3020

Do NOT touch the drum or rollers
when you operate the jog switch.

Do NOT put hands Inside
machine while it is operatung.
Hands could get caught up
or crushed.

WARNING

N5-T3010

Do not touch the roller below. Your clothes etc. may be stained with ink.

CAUTION

No. Parts No. Name Q´ty

q

L1-T3060 Warning Sticker 1 1

w

L5-T3020 Warning Sticker 2

e

M7-T3030

Warning Sticker 3 1
Caution Sticker 1 1

q

w

r

t

e

N5-T3010

t

Caution Sticker 2 1

vii

Contents

¡Introduction..............................................................ii

¡

Notes on Safety (Please Read and Observe)

..............iii

Safety Precautions

……………………………………iii

Locations of warning stickers ………………………vi

¡Function Quick Reference.....................................ix

¡How to Use the Instruction Manual.......................xi

Introduction – Notes on Safety – i

1.

¡

System Setup.....................................................

2

¡

Part Names and Their Functions.....................

3

Printer Appearance.............................................

3

Control Panel......................................................

6

Display Screen...................................................

8

¡

Turning Power ON/OFF.....................................

9

Turning Power ON..............................................

9

Turning Power OFF.............................................

9

Standard Mode.................................................

10

Key Card Counter

[ Available only with Key Card Counter installed ]............

10

¡

Document/Printing Paper Specification........

11

Acceptable Documents.....................................

11

Acceptable Printing Paper................................

11

¡

How Platemaking and Printing is Performed

....

12

Platemaking......................................................

12

Printing.............................................................

12

Before Use 1

2.

¡

Basic Printmaking...........................................

14

¡

Loading and Replacing Paper........................

16

¡

Loading Documents .......................................

18

Loading Document on Document Glass Plate

.....

18

Loading Document in ADF

[ Available only when ADF is installed ]........................

19

¡

Enlarging/Reducing from Standard-Size Document to

Standard-Size Paper

.....................................

20

¡

Selecting Printing Paper Size ...............

22

¡

Print Output.....................................................

24

Basic Operations 13

3.

¡

Enlargement and Reduction..........................

26

94% Reduction .........................................

27

Auto Zoom ................................................

28

Free Zoom ................................................

30

¡

Adjusting Darkness........................................

31

Adjusting Plate Darkness ..........................

31

Adjusting Contrast ....................................

32

Adjusting Print Darkness ..........................

33

¡

Printing Photographs and Color Documents

...

34

Text/Photograph/Text and Photograph Mode

...

35

Fine Text/Screen Mode .............................

36

Photo Dark Mode ......................................

37

¡

Book Shadow Eraser Mode ....................

38

¡

Multiple Printing on One Page.......................

42

Multiple Printing .........................................

42

2-in-1 Layout

[ Available only with ADF installed ]...........................

44

¡

Saving/Retrieving/Deleting the settings

[User Settings ].....................................

46

Saving Settings................................................

46

Retrieving Settings...........................................

48

Deleting Settings..............................................

50

¡

Batch Printing..................................................

51

Batch Printing...................................................

52

Sequential Batch Printing.................................

54

¡

Dividing Sections with Tape

[ Available only with Tape Cluster Device ]

...............

56

Advanced Operations ( Printing with useful functions )

25

Contents

viii

Notes on Safety

Contents Before Use

Printing (Basic)

Replacement

Troubleshooting

Maintenance

Printing (Advanced)

Other Functions

Specifications

5.

¡

Confidential Safeguard Function .............

58

¡

Total Counter Display Function.....................

59

¡

Print Speed Adjustment Function ..........

60

¡

Printing Position Adjustment Function

...

61

Printing Position Adjustment............................

61

Position Reset..................................................

62

¡

Edit Function .............................................

63

¡

Special Functions ...................................

64

Fine Start “Startup Time Setting”.....................

64

Fine Start “Operation at Next Platemaking”.....

66

Auto Clear.........................................................

68

Preprint.............................................................

70

Batch Print Mode..............................................

72

Auto Power Off.................................................

74

Auto LCD Off....................................................

76

Ink Circulation...................................................

78

Tape Cluster Mode

[ Available only with Tape Cluster Unit ].

......................

80

Double Feed Detection.....................................

82

Drum Size Mode

[ Available only with A3/A4 Drum ]..............................

84

¡

User Setting Function .............................

86

Initial Setting.....................................................

86

Optimize Print Mode.........................................

88

Document Memory Mode.................................

89

Document Density Detection Mode..................

90

Feed Heavy Weight Paper.............................

92

Online Mode...................................................

93

¡

Current Setting Function ......................

94

¡

On-Line Print Function

[ Available Only With Interface Kit Installed ]..........

95

Other Functions 57

¡

Replacing the Ink Pack.................................

98

¡

Replacing the Master Roll............................

100

¡

How to Dispose of Used Masters................

102

¡

Removing the Drum Unit..............................

104

Removing the Drum Unit................................

104

Installing the Drum Unit..................................

105

Replacement of Consumables 97

6.

¡

If trouble occurs............................................

108

¡

When messages appear...............................

109

¡

Supplying or Changing Paper While Printing

.....

112

If Paper Runs Out During Printing..................

112

Adding Paper While Printing..........................

112

Changing Paper Selection.............................

113

¡

Paper Jams....................................................

114

When “PAPER JAM ON THE FEEDER SIDE

”

is displayed...114

When “PAPER JAM ON THE EJECTION SIDE

”

is displayed

.

115

Paper Adhering to Drum................................

116

¡

When “PLATE EJECTION ERROR

”

is Displayed

....

118

¡

When “MASTER SETTING ERROR

”

is Displayed

...

121

¡

When “SET MASTER ROLL PROPERLY”is Displayed

...

122

Troubleshooting 107

7.

¡

Maintenance..................................................

126

Maintenance 125

4.

8.

¡

Specifications................................................

128

Specifications 127

Function Quick Reference

xix

Function Quick Reference

Function Quick

Reference

READY

PAPER SIZE

A 3

100%

0.0mm

0.0mm

TEXT

ZOOM

PRINT POS.

IMAGE MODE

100

SHT

1

SET

A

A

A

A

115%

122%

141%

A

A

A

A

86%

81%

70%

A

A

A

A

A

A

A

122%

115%

141%

86%

81%

70%

[129%]

[121%]

[77%]

[74%]

[64%]

¡

Auto Zoom

a

28 page

¡

Free Zoom

a

30 page

Document

A

A

500% 50%

A

¡

Enlargement

a

20 page

¡

Reduction

a

20 page

A

A

94%

¡

94% Reduction

a

27 page

A4 Document A4 Printout

94%
Reduction

O P

Document

Center shadow eraser

P

PO

¡

Book Shadow Eraser Mode

a

38 page

Outline shadow eraser

O P

PO

Center & outline shadow eraser

O P

PO

PO

O P

¡

Center shadow eraser

¡

Outline shadow eraser

¡

Center & outline shadow eraser

¡

Without shadow eraser

¡

Specific Area

a

41 page

¡

Batch Printing

a

52 page

¡

Sequental Batch Printing

a

54 page

A

C

C

C

B

B

A

A AA

C

C

C

B

B

A

B CA A

Document

1 st set :
4 copies x 2 sets

2 nd set :
3 copies x 3 sets

3 rd set :
2 copies x 4 sets

Document

1 st document :
4 copies x 2 sets

2 nd document :
3 copies x 3 sets

3 rd document :
2 copies x 4 sets

¡

Multiple Printing

a

42 page

¡

2 - in - 1 Layout

a

44 page

BAA

¡

Text / Photograph /
Text & Photograph

a

35 page

¡

Fine Text / Screen Mode

a

36 page

¡

Photo Dark Mode

a

37 page

A

Document

Text /
Fine lettering

Photograph /
Fine lettering

Screen 1 Screen 2

With
Photo Dark

Without
Photo Dark

Printout

1234567890
abcdefghijkl
mnopqrstuv
wxyz

1234567890
abcdefghijkl
mnopqrstuv
wxyz

A

Text Photograph

1234567890
abcdefghijkl
mnopqrstuv
wxyz

Text & Photograph

1234567890
abcdefghijkl
mnopqrstuv
wxyz

¡

Printing Photographs and Color Documents

¡

Switching batch printing / sequential batch printing

¡Multiple printing

¡

Printing with shadows (periphery or center) erased

¡94% Reduction

¡Enlargement / Reduction

72 page

¡

Operation key

a

6

page

¡

Display description

a

8

page

¡Panel cover

¡

Operation key

page

¡

Display description

page

¡Control Panel

AA A

Document

2 images

4 images

8 images

16 images

AA

AA

AAAAAA

AA

AA

AA

AA

AA

AA

AA

AA

AA

A

A

A

Document

Printout

With
shadow eraser

With
shadow eraser

With
shadow eraser

Without
shadow eraser

Document Document

Document

Document

[ ] : U.S.

a

7

a

8

xi

How to Use the Instruction Manual

Conventions Used in this Manual

Introduces instructions for correct operation of the machine. If these
instructions are ignored, the machine my not be able to operate at optimum
performance, or may break down.

Introduces information that is useful for operation and maintenance of the
machine, or information about the machine’s performance, etc.

IMPORTANT

:

NOTE

:

33

S

Adjusting Darkness

If the test print made after platemaking is too light, adjust the print darkness. If you cannot
adjust the print darkness sufficiently to give a satisfactory print, adjust the plate darkness.

"You can print immediately after adjusting the print darkness.

"

If you adjust the plate darkness, you must repeat the platemaking process before making prints.

IMPORTANT

:

2The plate darkness can be adjusted in 5 steps.

Make the plate more dark if the document is light, or light if the document is dark.

"

NOTE

:

Adjusting Plate Darkness

s

How to Adjust Plate Darkness

Pressing (CANCEL) key redisplays the main screen.

1

Open the Panel cover.

2

Press(PLA

TE DARKNESS

) key

.

3

Press “CURSOR” keys to select “PLATE
DARKNESS”.

4

Press (OK) key.
The selected plate darkness is set.

Printing

(Advanced)

3.

SELECT PLATE DARKNESS WITH
AND PRESS

PLATE DARKNESS

LIGHT MEDIUM DARK

w

q

e

SelectrSet

¡

If you reset to Standard

"

Press (ALL CLEAR) key. In this case, all
settings are reset to standard mode.

“ Standard mode” asee p.10

"

Do not remove the cover affixed with

Warning Label 1.

"

Personnel may be injured by the movable
cutter inside the machine.

WARNING

Press the (PLATE DARKNESS) key, then “CURSOR”keys.
Select

“

MEDIUM” and press (OK) key.

Adjusting Darkness

d

[Plate Darkness]

2The manual composition is as follows.

( The below is a sample and differs from the actual contents. )

Title

Title contents

Subtitle

Operation
procedure

Page

Subtitle

contents

Chapter

title

Related

Illustration

Display

Screen

Key

Warning / Caution

Be sure to observe.

a

see page iii for

details

Topic / [ ]: Key to use

1

Before Use

1.

¡System Setup...............................................................2

¡Part Names and Their Functions................................3

Printer Appearance........................................................3

Control Panel.................................................................6

Display Screen..............................................................8

¡Turning Power ON/OFF................................................9

Turning Power ON.........................................................9

Turning Power OFF.......................................................9

Standard Mode............................................................10

Key Card Counter

[ Available only with Key Card Counter installed ].

......................10

¡Document/Printing Paper Specification...................11

Acceptable Documents................................................11

Acceptable Printing Paper...........................................11

¡How Platemaking and Printing is Performed..........12

Platemaking.................................................................12

Printing........................................................................12

2

System Setup

S

Printer and Optional Equipment

Documents prepared on a personal computer can be printed on this machine.
The PC interface kit is required to connect this machine to a personal computer.

DDP system

NOTE :

KEYCARD COUNTER 4

: Option

TAPE CLUSTER 05

Personal computer

S2-ADF

Duplo Direct Print System

Drum unit
A3/A4 drum (Attachable to DP-460e/440e/430e only)

Edit monitor

CF memory card kit

DP-RIP

FS-100P

Cabinet

440e Ce

3

Before Use

1.

S

Printer Appearance

Side guide

Paper feed roller

Side guide

Paper separator unit

Paper feed section

a See Page 6

Press to lower the feed tray.

Connector (P.C)

Panel cover
LCD backlight control volume

Scanner switch
Feed tray descend switch

Inlet

Feed tray

Feed pressure
adjuster lever

Support tray

Power switch

Document cover

Glass

Scale

Control panel

Caster locks

Cabinet

Use to adjust the paper
feed pressure.

Open this cover to replace the ink pack,
drum unit and dispose of plate ejection roll

(used master).

Front cover

Keeps the document in contact
with the document glass plate.

The document is place on this glass.

a See Page 95

Use to adjust the brightness of
the backlight on the LCD panel.

a See Page 9

a See Page 16

a See Page 9

High

Standard

Low

Side guide lever

Separation pressure
adjuster knob

a See Page 16

a See Page 17

Use to adjust the separation
pressure according to
the paper thickness.

Lock/unlock the side guide.

CF card connector (Option)

HIGH:

Thin

LOW:

Thick

Standard

460e AAE

s

Outside / Inside of paper feed

Part Names and Their Functions

4

s

Inside of printer



Press and hold to rotate the drum for a set time.
Use to remove paper jam’s etc.

Master feed section

Cutter

Master roll

Master cover

Master ejection section

Master ejection box cover

Master ejection box cover
release lever

Master ejection box
cover

LED
JOG switch 1

Upper drum shaft

Drum handle

Drum securing lever

Ink puck holder
release lever

Ink puck

Master clamp

Drum section

Scanner switch

Master cover

Master Cover Release Lever

Press the lever to open the master cover
when the master roll is setted up.

Scanner unit

Press to open the master ejection box cover.

Master ejection box
release lever

Press to pull out the master ejection box.

This lever is locks or unlocks the
drum in stopping the drum position.

a See Page 100

a See Page 102

a See Page 102

a See Page 104

a See Page 98

Use this lever to replace the Ink pack.

Master ejection core

a See Page 103

Use to dispose of used master.

Master roll cut switch

a See Page 123

Drum can be removed when LED is lit.

Set line

460e BBE

Part Names and Their Functions

5

Before Use

1.

s

Outside/Inside of print output side

Jump plate

Paper stacker guide

Paper stopper

S2-ADF connector cover
(Optional)

Interface kit II (Optional)

Connectors (Optional)

Print tray

Top fun cover
Top fan

Press and hold to rotate the drum for a set time.
Use to remove paper jam’s etc.

JOG switch 2

Key card counter (Option)

This slot is for inserting the key card.

Open when paper jam occurs.

460e CCE

Part Names and Their Functions

76

Before Use

1.

S

Control Panel

EDIT key

NameNo. Function

Switches to rotate the document image for plate.

CONFIDENTIAL SAFEGUARD key

Enables confidential safeguard function.
Prints cannot be made unless a new master is made.

USER SETTING key Switches to User setting list display.

SPECIAL FUNCTION key

Switches to Special function list display.

1. JOB SETTING MEMORY 2. INITIAL SETTING 3. OPTIMIZE PRINT

4. DOCUMENT MEMORY 5. DOCUMENT DENSITY DETECTION

6. FEED HEAVY WEIGHT PAPER 7. ONLINE MODE

1. Fine Start 2. Auto Clear 3. Preprint 4. Batch Print Mode 5. Auto Power Off

6. Auto LCD Off 7. Ink Circulation 8. Tape Cluster Mode(Option)

9. Double Feed Detection 10. Drum Size Mode(Option)

CURRENT SETTING key

Shows a list of current setting of the machine.

MASTER DARKNESS key

Switches to Master darkness control display.

MASTER CONTRAST key

Switches to Master contrast control display.
PRINT DARKNESS key Switches to Print Darkness control display.
BOOK SHADOW ERASURE key

Switches to Book Shadow erasure setting display.
MULTIPLE EXPOSURE key

Switches to multiple exposure setting display.
94% key

Reduces image to 94%.

94% key can be used in conjunction with preset zoom setting.

LCD

NameNo. Function

Displays current settings and status of the machine e.g. print volume,

and error messages in case of error.
Cursor keys Selects setting item and adjusts printing position.
OK key Enters specified setting.
Ten keys Enter the print volume etc.
TEST PRINT key Prints 1 copy to check the image position and density etc.
PLATE MAKING key Starts making a master.
PRINT SPEED key Switches to Print speed control display.
PAPER SIZE key Switches to Paper size selection display.
ZOOM key Switches to Zoom setting display.
PRINT POSITION key Switches to Print Position control display.
IMAGE MODE key Switches to image mode selection display.
CANCEL key

Cancels settings in Special Functions etc and returns to main display.
CLEAR key

Returns the print volume to 0.

Other settings on the control panel are not changed.
key Enters the print and group number in batch printing.

ALL CLEAR key

Return all settings on the control panel to default.

( Press and hold at least 1 second.)

PRINT key

Starts printing. This key does not start making a master.

Printing cannot start when the lamp o the key is red.

Confirm that the light is Blue before pressing.

When equipped with optional ADF unit:

When next document is set on the ADF, next master making starts automatically

after a printing is finished.

STOP key

Stops printing.

*While the machine is not working, indicates the total print quantity

and the total master quantity.

PAPER SIZE

A 3

100%

0.0 mm

0.0 mm

TEXT

ZOOM

PRINT POS.

IMAGE MODE

READY

0

SHT

1

SET

2Keys Inside Panel Cover

Darker Lighter

2

LCD backlight control volume

Part Names and Their Functions ddControl PanelPart Names and Their Functions ddControl Panel

8

ADJUST

RESET
CANCEL

0.0 mm

0.0 mm

0.0 mm

0.0 mm

15 page

35 page61 page20 page22 page

Press the Ten keys

¡Initial screen

: Plate Darkness
: Plate Contrast
: Print Darkness
: Book Shadow Eraser
: Multi Exposure ( 2 images )
: Edit
: Confidential
: Memory

Indicators appear for the following settings.

Display changes according to the settings.

: PAPER SIZE ( In this example, A3 )
: ZOOM ( In this example, 100% )

: PRINT POS. (In this example, the position is moved

1.5 mm upwards and 0.5 mm to the right )

: IMAGE MODE

( In this example, TEXT )

100%

A 3

0.5mm

1.5mm

TEXT

PAPER SIZE

A 3

100%

0.0 mm

0.0 mm

TEXT

ZOOM

PRINT POS.

IMAGE MODE

READY

0

SHT

1

SET

100

SHT

1

SET

PAPER SIZE

ZOOM

PRINT POS.

IMAGE MODE

A 3
B

4

A

4

R

B

5

R

A

5

R

POST

A 4

TEXT

PHOTO
TEXT/PHOTO
TEXT FINE
PHOTO FINE
SCREEN1
SCREEN2
PHOTO DARK

s

Display Screen

EDIT

OFF

ROTATE

90

DEGREES

ROTATE

180

DEGREES

CONFIDENTIAL

ON

CANCEL

USER SETTING

1.JOB SETTING MEMORY

2.INITIAL SETTING

3.OPTIMIZE PRINT

4.DOCUMENT MEMORY

5.DOCUMENT DENSITY DETECTION

6.FEED HEAVY WEIGHT PAPER

SPECIAL FUNCTION

1.FINE START OFF

2.AUTO CLEAR OFF

3.PRE-PRINT

0

PRINTS

4.BATCH PRINT BATCH

5.AUTO POWER OFF

OFF

6.AUTO LCD OFF

OFF

BATCH PRINT

5

SHT 1

PRINTING SPEED 3
PAPER SIZE

B4

ZOOM

86%

PRINT POSITION

0.0

mm

0

CURRENT SETTING

PLATE DARKNESS

LIGHT MEDIUM DARK

PLATE CONTRAST

TEXT

PHOTO
TEXT/PHOTO

PRINT DARKNESS

LIGHT MEDIUM DARK

SHADOW ERASURE

OFF
CENTER

OUTLINE



CENTER & OUTLINE



MULTI EXPOSURE

OFF
2

4

8

94%

ON

OFF

¡

Other screens (Error messages asee page 109)

a

See page 63

a

See page 58

a

See page 46, 86 -

a

See page 64

-

a

See page 94

a

See page 31

a

See page 32

a

See page 33

a

See page 40

a

See page 43

a

See page 27

2

The operation status or messages appear on the LCD panel. Followings are principal screens.

Part Names and Their Functions ddDisplay Screen

9

Turning Power ON/OFF

Before Use

1.

440204b

440204a

1

3

1

Connect the “female plug” of the power supply
cord to the “inlet”.

Press the “ I ” side on the “power switch”.

Press the “

™™

” side on the “power switch”.

s

Turning Power ON

Female plug
of the power

supply cord

Inlet

Printer side Outlet

2

Connect the “male plug” of the power supply
cord to the “outlet”.

The printer is turned off and the panel display
goes out.

s

Turning Power OFF

Outlet

Male plug of

the power

supply cord

The message “PLEASE WAIT” appears on the
LCD panel and warm-up starts.

The printer is ready when the initial screen
appears on the LCD panel.

“Standard Mode” is set for each function.

Standard Mode

a

See page 10

Note

:

¡

For models with Key Card Counter

The message “RE-INSERT CARD” appears on
the LCD panel.
Insert the “Key Card” into the slot.

Key Card Counter

a

See page 10

Note

:

440204c

4

Adjust the brightness of the LCD panel using
“LCD backlight control volume”. a see page 6

¡

Initial screen

440204

Power switch:

™™

side

Power switch:

I side

LCD backlight

control volume

A 3

100%

0.0 mm

TEXT

READY

0

SHT

1

SET

10

Turning Power ON/OFF ddStandard Mode

s

Standard Mode

2When the printer power is first turned ON or (ALL CLEAR) key is pressed, the

functions are reset to standard mode. The standard mode settings are as follows:
The settings are different if the initial settings are changed.

To change standard modeaSee page 86

NOTE

:

2

With the key card counter installed, you can control the platemaking and print quantities per
person or per department, etc. See the Instruction Manual for the Key Card Counter for details.

440243

The initial screen appears on the LCD panel
and the printer is ready.
“Standard mode” is set for each function.

¡

Inserting a key card

1

When you turn on the power, the message
“RE-INSERT CARD” is displayed on the LCD
panel.
Insert a key card in the key card counter.

¡

Handling key cards

Key Card Counter (Available only with Key Card Counter installed)

2

Do not bend or soil a key card.

2

Keep your key card well away from
magnetic fields.

2

Do not insert any objects other than
key cards into the key card slot.

IMPORTANT

:

Print quantity : 0
Print position : Standard
Zoom : 100%
x 94% : OFF
Paper size : A3 ( DP-460e / 440e / 430e )

B4 ( DP-340e / 330e)
LEGAL ( DP-330Le)

Document mode : Text
Print speed : Standard
Print darkness : Standard
Plate darkness : Standard

key card

11

Document/Printing Paper Specification

s

Acceptable Documents

s

Acceptable Printing Paper

Before Use

1.

2Weight : Sheet documents, books, etc, not exceeding 10kg.
2Size : 297mm x 432mm [max].

¡

Document glass plate

2Document thickness : 64gsm to 128gsm
2Document size : 297mm x 432mm [max].

100mm x 148mm [min].

2Stacking capacity in document tray : 100 sheets ( 64gsm )

The following types of document cannot be used:

2

Documents with large file-binding holes, tears, or missing parts

2

Documents with staples or paper clips attached

2

Documents with markedly curling ends/sides, or marked folds

2

Carbon-backed documents

2

Sticky documents

2

Highly transparent documents such as OHP film

When ADF is Installed:

2

To make a new plate from a document from which a plate has already
been made, remove and then reload the document.

2

Always use documents of the same size.

2

If you load documents of different lengths, the printer may not operate
correctly.

IMPORTANT

:

IMPORTANT

:

¡

ADF

2Paper thickness : 53 gsm to 210 gsm (13 lb to 110 lb)

2

Paper size : 297mm x 432mm [max].

100mm x 150mm [min].

2

Paper stacking capacity: Feed tray : 1500 sheets ( 64gsm high-grade paper )

Print tray : 1500 sheets ( 64gsm high-grade paper )

The following types of paper cannot be used.

2

Paper with large file-binding holes

2

Paper with staples or paper clips attached

2

Paper with markedly curling ends/sides, or marked folds

2

Carbon-backed paper

2

Paper with smaller pieces of glued paper

IMPORTANT

:

¡

Feed tray / Print tray

12

How Platemaking and Printing is Performed

s

Platemaking

s

Printing

2In the “platemaking” process, the old master on the drum is removed while the thermal

head creates the scanned image on the new master and transfers it onto the drum.

2In the “printing” process, paper separated from the stack by the feeder roller and paper

separator unit is pressed against the drum unit by the press roller. There are small holes
over only the image area of the master that is attached to the drum, and ink that seeps
from these holes is transferred to the paper. The paper is then peeled from the master by
the paper stripper finger and the top blow fan. The paper is directed onto the paper
ejection belt by a fan unit and discharged from the machine.

Master roll Master ejection box

Drum

unit

Thermal head

24S050AE

Drum unit

Feeder roller

Paper

Paper sepatator unit

Press roller

Paper stripper finger

Paper ejection belt

Fan unit

Top blowfan

44000De

¡Basic Printmaking.................................................... 14

¡Loading and Replacing Paper ................................ 16

¡Loading Documents ................................................ 18

Loading Document on Document Glass Plate............18

Loading Document in ADF (Available only when ADF is installed)

...... 19

¡

Enlarging/Reducing from Standard-Size Document

to Standard-Size Paper

.............. 20

¡Selecting Printing Paper Size .......................... 22

¡Print Output .............................................................. 24

13

Basic Operations

2.

PRESS

ZOOM

14

Basic Printmaking

s

Printing Using Basic Functions

440204

1

Press the “ I ” side on the “power switch”.

Power switch

2

Load paper.

3

Load the document.

¡

If the power is already ON

q

Press (ALL CLEAR) key.

a

See page 9

NOTE

:

a

See page 16

NOTE

:

4

Select the zoom ratio.
The zoom ratio is set to 100%.

¡

If you are positioning the document on

the document glass plate

q

Open the “document cover”.

w Place the “document face down” on the

document glass plate aligned with the scale.

e Close the “document cover”.

¡

If you are loading the document in the optional ADF

q Adjust the “document guides” to the marks

for the size of the document.

w Place the “document face up” in the

document tray.

¡

To change the zoom ratio

q

Press “CURSOR” keys to high-light the

desired zoom ratio.

a

See page 18

NOTE

:

a

See page 19

NOTE

:

a

See page 20

NOTE

:

Document cover

PRESS

ZOOM

¡

European

¡

U.S.

440205c

440ADF001

Printing

face down

Printing

face up

Document tray

Document

size

Scale

Document guide

Document

Document

w

Press (OK) key.

15

Basic Printmaking

2.

Printing

6

Press (PLATE MAKING) key.
When the plate has been made, one test print
is automatically made.

"

The test print is for verification purposes

only and may be fainter than the final print.

IMPORTANT

:

8

Use the key pad to specify the “number of
prints” to make.

"

You can specify up to 9999 prints.

NOTE

:

¡

If you make a mistake entering the

number of prints

q

Press (CLEAR) key then enter the correct

number.

"

You can enter the number of desired prints before
pressing (PLATEMAKING) key to immediately
print the required number of copies.

NOTE

:

Key pad

9

Press (PRINT) key.
The “feed tray” rises so that the top of the
paper stack is the height of the feed roller.
The print run starts and the count displayed
on the LCD panel is decremented by one for
each print made.
The printed pages are output to the “print tray”.

¡

To stop a print run

q

Press (STOP) key. To restart the print

run, press (PRINT) key again.

¡¡¡

Repeat steps3 to9 to print multiple documents.

¡¡¡

¡

Example: When “1” , “0” and “0” are pressed

on the keypad.

READY

100

SHT

1

SET

5

Set the “paper stacker guides”, “stacker
stopper” to the paper width.

a

See page 24

NOTE

:

7

Check the “printing finish”.
Check if the print is made in the optimal position.

(Basic)

B5

A5

A4

B4

A3/

A4

/

A5B5R

R

R

16

Loading and Replacing Paper

s

Loading and Replacing Paper

1500 sheets can be loaded.

440201e-a

1

Open the “support tray” if it is closed.

Support tray

2

Hold the “side guide lever” and adjust the
“side guide” according to the paper size.

Side guide

lever

Side guides

3

Fan sheets and align them.

4

Put the sheets between the “side guides” and
push them to the inside.

"

55 kg of paper or about 1500 sheets of

high-grade paper can be loaded.

NOTE

:

¡

Thick paper (if no paper is fed)

q Adjust the “feed pressure adjuster lever” to

“HIGH”.

¡

Thin paper (if two sheets are fed)

q

Adjust the “feed pressure adjuster lever” to

“LOW”.

5

Adjust the “feed pressure adjuster lever” to
the paper thickness.

Low

High
Standard

"

When “9. DOUBLE FEED DETECTION” in the
special function is set to “ON”, the double feed
is detected, and the message “DOUBLE
FEEDING ERROR” is displayed.

a

See page 82

NOTE

:

440201e-b

440201e-c

440202e-a

Feed pressure

adjuster lever

Feed pressure

adjuster lever

17

2.

Printing

¡

Thick paper (if no paper is fed)

q

Turn the “separation pressure adjuster knob”

using a flat head screwdriver to “

LOW

”.

¡

Thin paper (if two sheets are fed)

q

Turn the “separation pressure adjuster knob”

using a flat head screwdriver to

“

HIGH

”.

1

Adjust the

“separation pressure adjuster knob”

to the paper feed pressure.

s

When no thick paper is fed or two sheets of thin paper are fed

(Basic)

High

: Thin

Low

: Thick

Standard

440259e

Separation pressure

adjuster knob

Separation pressure

Loading and Replacing Paper

18

Loading Documents

s

Loading Document on Document Glass Plate

440205

1

Gently open the “document cover”.

Document cover

2

Position the document on the document glass
plate.
Place the “document face down” on the document
glass plate,aligned with the guide (scale).

The document can be loaded in the “portrait” or “landscape” position.

"A4, B5, and A5-size documents can be loaded in the

“

portrait”or“landscape”position.

"

Use the landscape position when enlarging or reducing from standard-size

documents to standard-size paper, such as A4 to A3.

"

A3 and B4 documents can only be loaded in the landscape position.

IMPORTANT

:

s

How to load document

When printing books, thick or thin documents

"

When you load a non standard-size document,
place it with the center of the document
aligned with the arrow on the guide

(scale)

.

IMPORTANT

:

3

Gently close the “document cover”.

"

When you place a thick document such as a
book on the document glass plate, take care not
to force the document cover as this may
damage the document glass plate with a risk of
personal injury.

IMPORTANT

:

440205b

2Portrait (Vertical) Placement 2Landscape (Lateral) Placement

440205a

Arrow

Printing

face down

Scale

Document

19

2.

Printing

s

Loading Document in ADF [Available only when ADF is installed]

1

Align the “document guides” with the marks for
the size of document to be loaded in the ADF.

2

Place the “document face up” in the document
tray.
Platemaking starts with the top document in
the tray.

Load documents that consist of a series of sheets to be printed in the ADF.
When one or more documents are loaded in the ADF, platemaking and printing are
automatically repeated until the document tray is empty.

"

ADF mode is automatically selected when a document is loaded in the ADF.
The ADF then takes priority over the document glass plate in the platemaking process.

The document can be loaded in the “portrait” or “landscape” position.

"

A4, B5, and A5-size documents can be loaded in the “portrait”or “landscape”position.

"

Use the landscape position when enlarging or reducing from standard-size documents

to standard-size paper, such as A4 to A3.

"

A3 and B4 documents can only be loaded in the landscape position.

IMPORTANT

:

IMPORTANT

:

s

How to load document (ADF)

When printing sheet-type documents in succession

"

Do not attempt to remove or add to the
documents in the document tray while
platemaking and printing are in progress.

IMPORTANT

:

440ADF003q

440ADF002

Document Guides

440ADF003

Document size

Printing
face up

2Portrait (Vertical) Placement 2Landscape (Lateral) Placement

Document

Document Tray

(Basic)

Loading Document

20

Enlarging/Reducing from Standard-Size Document to Standard-Size Paper

s

Enlarging/Reducing from Standard-Size Document to Standard-Size Paper European

1

Press (ZOOM) key.
A table of zoom ratios is displayed on the LCD
panel.

The following zoom ratios are available when enlarging or reducing a standard-size
document onto standard-size printing paper.

A

A

A

A

115%

122%

141%

s

How to Set Enlarging / Reducing

(from Standard-Size Document to Standard-Size Paper)

¡

Enlargements

You can enlarge a standard-size document onto
standard-size paper using the following zoom ratios:

A4RaA3andB5R aB4 .......141%

A4R

a

B4andA5R aB5 .......122%

B4

a

A3and B5R aA4R .....115%

¡

Reductions

You can reduce a standard-size document onto
standard-size paper using the following zoom ratios:

A3aB4 andA4R aB5R .......86%

B4

a

A4RandB5R aA5R .......81%

A3

a

A4Rand B4 aB5R .......70%

A

A

A

A

86%

81%

70%

SELECT AN ITEM WITH
AND PRESS

AUTO ZOOM

2

Press“CURSOR” keys to select the desired
zoom ratio. The selected zoom ratio is
displayed highlighted.

A 3

141%

0.0 mm

0.0 mm

TEXT

READY

0

SHT

1

SET

3

Press (OK) key. The zoom ratio is set,
and the main screen is redisplayed.

SELECT AN ITEM WITH
AND PRESS

ZOOM

440244

Press

"

Set the desired zoom ratio before starting the
platemaking process.

Each press of“CURSOR”key moves to
a different item and that item is
displayed highlighted.

¡

To return to “100%", use one of the following two methods:

"

Select 100% using“CURSOR”keys, and
press (OK) key.

"

Press (ALL CLEAR) key. In this case, all

settings are reset to standard mode.

Select

Set

21

Enlarging/Reducing from Standard-Size Document to Standard-Size Paper

2.

Printing

s

Enlarging/Reducing from Standard-Size Document to Standard-Size Paper

U.S.

1

Press (ZOOM) key.
A table of zoom ratios is displayed on the LCD
panel.

The following zoom ratios are available when enlarging or reducing a standard-size
document onto standard-size printing paper.

A

A

A

A

121%

129%

141%

s

How to Set Enlarging / Reducing

(from Standard-Size Document to Standard-Size Paper)

¡

Enlargements

You can enlarge a standard-size document onto
standard-size paper using the following zoom ratios:

.......141%

LTR

a

LDG .......129%

LGL

a

LDG .......121%

¡

Reductions

You can reduce a standard-size document onto
standard-size paper using the following zoom ratios:

LGLaLTR ....... 77%

LDG

a

LGL ....... 74%

LDG

a

LTR ....... 64%

A

A

A

A

77%

74%

64%

2

Press“CURSOR” keys to select the desired
zoom ratio. The selected zoom ratio is
displayed highlighted.

3

Press (OK) key. The zoom ratio is set,
and the main screen is redisplayed.

440244us

"

Set the desired zoom ratio before starting the

platemaking process.

Each press of“CURSOR”key moves to
a different item and that item is
displayed highlighted.

¡

To return to “100%", use one of the following two methods:

"

Select 100% using“CURSOR”keys, and

press (OK) key.

"

Press (ALL CLEAR) key. In this case, all

settings are reset to standard mode.

Select

Set

Press

(Basic)

SELECT AN ITEM WITH
AND PRESS

AUTO ZOOM

A 3

141%

0.0 mm

0.0 mm

TEXT

READY

0

SHT

1

SET

SELECT AN ITEM WITH
AND PRESS

ZOOM

22

B 4

100%

0.0 mm

TEXT

READY

0

SHT

1

SET

Selecting Printing Paper Size

s

Selecting Printing Paper Size

European

1

Press (PAPER SIZE) key.
A table of paper sizes is displayed on the LCD
panel.

The following shows the image size that can be
scanned for platemaking.

B

A

s

How to Select Printing Paper Size

Pressing (CANCEL) key redisplays the main screen.

Paper size A( 1 %) B ( 1 %)

A3 291mm 414mm
A4(R) 204mm 291mm
A4 291mm 204mm
B4 251mm 358mm
A5(R) 204mm 142mm
A5 142mm 204mm
B5(R) 251mm 176mm
B5 176mm 251mm

2

Press“CURSOR” keys to select the desired
paper size ratio. The selected zoom ratio is
displayed highlighted.

3

Press (OK) key. The paper size ratio is set, and
the main screen is redisplayed.

About 8mm cannot be printed.

This margin is known as

the top margin.

SELECT AN ITEM WITH
AND PRESS

PAPER SIZE

A 3
B

4

A

4

R

B

5

R

A

5

R

POST

A 4

SELECT AN ITEM WITH
AND PRESS

A 3

B

4

A

4

R

B

5

R

A

5

R

"

When you do not select a paper size and print to a smaller paper, the internal

parts of the machine and the print may be soiled.

"

You will not obtain the correct layout when you start multiple printing with a

wrong-sized paper selected.

IMPORTANT

:

440245

Press

Each press of“CURSOR”key moves to
a different item and that item is
displayed highlighted.

Select

Set

23

Selecting Printing Paper Size

2.

Printing

s

Selecting Printing Paper Size U.S.

1

Press (PAPER SIZE) key.
A table of paper sizes is displayed on the LCD
panel.

The following shows the image size that can be
scanned for platemaking.

B

A

s

How to Select Printing Paper Size

Pressing (CANCEL) key redisplays the main screen.

Paper size A( 1 %) B ( 1 %)

LDG 273mm 426mm
LT(R) 210mm 273mm
LT 273mm 210mm
LGL 210mm 350mm
MAX 291mm 414mm
ST(R) 134mm 210mm
ST 210mm 134mm

2

Press“CURSOR” keys to select the desired
paper size ratio. The selected zoom ratio is
displayed highlighted.

3

Press (OK) key. The paper size ratio is set, and
the main screen is redisplayed.

About 8mm cannot be printed.

This margin is known as

the top margin.

"

When you do not select a paper size and print to a smaller paper, the internal

parts of the machine and the print may be soiled.

"

You will not obtain the correct layout when you start multiple printing with a

wrong-sized paper selected.

IMPORTANT

:

440245

Each press of“CURSOR”key moves to
a different item and that item is
displayed highlighted.

Press

Select

Set

(Basic)

L G

100%

0.0 mm

TEXT

READY

0

SHT

1

SET

SELECT AN ITEM WITH
AND PRESS

PAPER SIZE

11 X 17
L

G

L

T

R

S

T

R

MAX
POST

L T

SELECT AN ITEM WITH
AND PRESS

11 X 17

L

G

L

T

R

S

T

R

MAX

24

B4 A3

SET
LINE

SET LINE

B4

B5

R

A4

R

Print Output

s

Print Output

Taking out the printed paper and ejecting paper

1

Open out the

“print tray”

.

Print tray

2

Open out the “paper stacker guides”.

Paper stacker

guide

3

Open out the “paper stopper

”

.

Paper stopper

Paper stacker guide

Knob

4

Grasp the “knobs” on the “paper stacker
guides” and adjust the position according to

the paper size.
Adjust the “SET LINE” according to the paper
size.

5

Grasp the “knobs” on the “paper stopper”and
adjust the position according to the paper size.
Adjust the “SET LINE” according to the paper
size.

440203e

440203ae

440203be

440203de

Knob

Knob

25

Advanced Operations ( Printing with useful functions )

3.

¡Enlargement and Reduction.....................................26

94% Reduction .....................................................27

Auto Zoom ............................................................28

Free Zoom ............................................................30

¡Adjusting Darkness...................................................31

Adjusting Plate Darkness ......................................31

Adjusting Contrast ................................................32

Adjusting Print Darkness ......................................33

¡Printing Photographs and Color Documents..........34

Text/Photograph/Text and Photograph Mode .......35

Fine Text/Screen Mode .........................................36

Photo Dark Mode ..................................................37

¡Book Shadow Eraser Mode ................................38

¡Multiple Printing on One Page ............................42

Multiple Printing.....................................................42

2-in-1 Layout

[ Available only with ADF installed ]......................................44

¡Saving/Retrieving/Deleting the settings

[User Settings ].................................................46

Saving Settings .....................................................46

Retrieving Settings .................................................48

Deleting Settings ...................................................50

¡Batch Printing.............................................................51

Batch Printing..............................................................52

Sequential Batch Printing............................................54

¡Dividing Sections with Tape

[ Available only with Tape Cluster Device ]..........................56

26

Enlargement and Reduction

S

Enlargement and Reduction

You can enlarge or reduce the size of the copy to the desired size.

A

A

94%

A

A

A

A

A

A

A

122%
[129%]

115%
[121%]

141%

86%
[77%]

81%
[74%]

70%
[64%]

¡

94% Reduction

a

page 27

You can make a copy that is just slightly
smaller than the original document.

¡

Auto Zoom

a

page 28

You can have the machine automatically set
the zoom ratio from the document size and the
selected paper size.

¡

Free Zoom

a

page 30

You can enlarge or reduce the size of the copy
in 1% increments between 50% and 500%.

(94 %)

A

A

500% 50%

A

440247e

A4 document A4 printout

[ ] : U.S.

Document

Document

27

Enlargement and Reduction

dd

[ 94% Reduction ]

Printing

3.

2

Open the Panel cover.

s

How to Set 94% Reduction

Pressing (CANCEL) key redisplays the main screen.

3

Press (94%) key.

2In this mode, the copy is printed at 94% the size of

the document. When it is not possible to print the
edges of the document image, this mode allows
you to make a minor reduction so that the edges
of the image are included.

"Select

“

94% Reduction” before platemaking.

"You cannot use

“

94% Reduction” at the same

time as

“

Free Zoom” .

IMPORTANT

:

4

Press“CURSOR”keys keys to select “ON”.

5

Press (OK) key. The 94% reduction is set.

6

Start platemaking and printing.
Proceed with steps

6

to 9of the sequence

described in “ Basic Printmaking”.

“ Basic Printmaking”

a

see p.14

SELECT AN ITEM WITH
AND PRESS

94%

ON

OFF

94% Reduction

1

Proceed with steps 1to 5of the sequence
described in “ Basic Printmaking”.

“ Basic Printmaking”

a

see p.14

A

A

94%

A4 document A4 printout

(94 %)

w

q

e

Select

r

Set

¡

If you set to other than “100%” with the

(ZOOM) key

You can set “94% reduction”.
Zoom ratio: “zoom ratio displayed on the LCD
panel x 94%” .

¡

If you cancel the 94% reduction

Use one of the following methods.

• Press

(94%)

again, select “OFF” and press

(OK) key.

•

Press (ALL CLEAR) key. In this case, all

settings are reset to standard mode.

“ Standard mode” asee p.10

(Advanced)

A 3

94%

0.0 mm

0.0 mm

TEXT

READY

0

SHT

1

SET

94 ％

28

Enlargement and Reduction

dd

[ Auto Zoom ]

2The machine automatically selects the optimum zoom ratio and proceeds with platemaking

and printing when you select a paper size and then load the document to be copied. The auto
zoom ratios are automatically selected from the following preset ratios. If you use other paper
sizes or document sizes, the closest ratio is automatically selected from the preset values.

Auto Zoom

2

Load the document.

“Loading Documents”

a

see p.18

s

How to Set Auto Zoom

Pressing (CANCEL) key redisplays the main screen.

3

Press (ZOOM) key.
A list of the zoom ratios is displayed on the
LCD panel.

1

Select a paper size.

“Selecting Printing Paper Size”

a

see p.22

¡

If you are using the ADF

Press (PLATE MAKING) key.
The zoom ratio is displayed when the
document feeds into the ADF.

141% A4RaA3 / B5R aB4 86% A3 aB4 / A4R aB5R
122% A4RaB4 / A5R aB5 81% B4 aA4R / B5R aA5R
115% B4 aA3 / B5R aA4R 70% A3 aA4R / B4 aB5R

"Select

“

Auto Zoom” before starting platemaking.

"You cannot select

“

94% Reduction” at the same time as“Free Zoom".

IMPORTANT

:

440205a

Scale

Press

A

A

A

A

A

A

A

122%

115%

141%

86%

81%

70%

Document

141% 77% LGL aLTR
129% LTR aLDG 74% LDG aLGL
121% LGL aLDG 64% LDG aLTR

¡

European paper sizes

¡

U.S. paper sizes

A

A

A

A

A

A

A

129%

121%

141%

77%

74%

64%

Document

PRESS

ZOOM

AN

ITEM WITH

PRESS

ZOOM

¡

European

¡

U.S.

Document

Document

29

Enlargement and Reduction

dd

[ Auto Zoom ]

" Document not positioned centrally

against the scale.

440248

Printing

3.

4

Press“CURSOR”keys to select “AUTO ZOOM”.
Each press of “CURSOR” keys moves to a
different item and that item is displayed
highlighted.

6

Load paper.

“Loading and Replacing Paper”

a

see p.16

7

Start platemaking and printing.
Proceed with steps

6

to 9of the sequence

described in “ Basic Printmaking”.

“ Basic Printmaking”

a

see p.14

"

Always select the size of printing paper to

be used.

"

You cannot obtain the correct zoom ratio if

you select a wrong paper size.

"

This machine detects the document size
about 30mm from the scale (the shaded
area in the figure).

The machine cannot, therefore, detect the
size correctly if the document is positioned
as shown on the right.

IMPORTANT

:

¡

If you cancel AUTO ZOOM

Use one of the following methods.

•

Press the (ZOOM) key, then “CURSOR” keys.

Select “100%” and press (OK) key.

•

Press (ALL CLEAR) key. In this case, all

settings are reset to standard mode.

“ Standard mode” asee p.10

"Edge of paper not touching scale.

"Paper positioned sideways.

Machine senses a paper size twice as
large as actual size of paper.

Scale

Document

5

Press (OK) key. The auto zoom ratio is set,

and

the main screen is redisplayed.

PAPER SIZE

A 3

115%
AUTO

0.0 mm

0.0 mm

TEXT

ZOOM

PRINT POS.

IMAGE MODE

READY

0

SHT

1

SET

ZOOM

ZOOM

¡

European

¡

U.S.

The auto zoom ratio is set when the
cursor is moved to “AUTO ZOOM”.

Document

Document

Select

Set

(Advanced)

30

Enlargement and Reduction

dd

[ Free Zoom ]

2You can set a zoom ratio between 50% and 500%

in 1% steps.

"Select

“

FREE ZOOM” before starting platemaking.

"You cannot select

“

94% Reduction” at the same

time as

“

FREE ZOOM” .

IMPORTANT

:

Free Zoom

2

Press (ZOOM) key.
A list of the zoom ratios is displayed on the
LCD panel.

s

How to Set Free Zoom

Pressing (CANCEL) key redisplays the main screen.

3

Press“CURSOR”keys to select “FREE ZOOM”.

6

Press (OK) key. The free zoom ratio is set,

and

the main screen is redisplayed.

1

Proceed with steps 1to 5of the sequence
described in “ Basic Printmaking”.

“ Basic Printmaking”

a

see p.14

"

Text and lines may appear jagged at high

zoom ratios.

IMPORTANT

:

5

Press“CURSOR”keys to select number which
wants to expand.

4

Press (OK) key. The free zoom ratio is set

.

A

A

500% 50%

A

Document

FREE ZOOM

89

%



Press

¡

European

¡

U.S.

¡

European¡U.S.

• Each press of the key changes
the zoom ratio by 1 %.

• The zoom ratio changes sequentially
if you hold down the key.

The zoom ratio is set.

7

Start platemaking and printing.
Proceed with steps

6

to 9of the sequence

described in “ Basic Printmaking”.

“ Basic Printmaking”

a

see p.14

50

-

500%

Select

Set

¡

If you reset to 100%

Use one of the following methods.

•

Press the (ZOOM) key, then “CURSOR” keys.

Select “100%” and press (OK) key.

•

Press (ALL CLEAR) key. In this case, all
settings are reset to standard mode.

“ Standard mode” asee p.10

PAPER SIZE

A 3

89%

0.0 mm

0.0 mm

TEXT

ZOOM

PRINT POS.

IMAGE MODE

31

Adjusting Darkness

dd

[ Plate Darkness ]

S

Adjusting Darkness

If the test print made after platemaking is too light, adjust the print darkness. If you cannot
adjust the print darkness sufficiently to give a satisfactory print, adjust the plate darkness.

"You can print immediately after adjusting the print darkness.

"

If you adjust the plate darkness, you must repeat the platemaking process before making prints.

IMPORTANT

:

2The plate darkness can be adjusted in 5 steps.

Make the plate more “dark” if the document is light, or “light” if the document is dark.

"Set the “Plate Darkness” before making the plate.

IMPORTANT

:

Adjusting Plate Darkness

s

How to Adjust Plate Darkness

Pressing (CANCEL) key redisplays the main screen.

1

Open the Panel cover.

2

Press (PLATE DARKNESS) key.

3

Press “CURSOR” keys to select “PLATE
DARKNESS”.

4

Press (OK) key.
The selected plate darkness is set.

Printing

3.

SELECT PLATE DARKNESS WITH
AND PRESS

PLATE DARKNESS

LIGHT MEDIUM DARK

w

q

¡

If you reset to Standard

Use one of the following methods.

•

Press the (PLATE DARKNESS) key, then

“CURSOR” keys.

Select “MEDIUM” and press
(OK) key. If the initial setting is changed, the plate
darkness returns to the one you set.

•

Press (ALL CLEAR) key. In this case, all

settings are reset to standard mode.

“ Standard mode” asee p.10

(Advanced)

e

Select

r

Set

READY

0

SHT

1

SET

Plate Darkness icon appears.

32

Adjusting Darkness dd[ Plate Contrast ]

2The plate contrast can be adjusted in 5 steps.

Make the plate more “LOW” if the document is low-contrast, or “HIGH” if the document is high-contrast.

"Set the “Contrast” before making the plate.

IMPORTANT

:

Adjusting Contrast

s

How to Adjust Contrast

Pressing (CANCEL) key redisplays the main screen.

1

Open the Panel cover.

2

Press (PLATE CONTRAST) key.

3

Press“CURSOR”keys to select document kinds
and contrast level.
You can change “CONTRAST” for “TEXT”,
“PHOTO” and “TEXT/PHOTO” modes.

4

Press (OK) key.
The selected contrast is set.

SELECT MODE & CONTRAST WITH
AND PRESS

PLATE CONTRAST

LOW MEDIUM HIGH

TEXT

PHOTO
TEXT/PHOTO

w

q

¡

If you reset to Standard

Use one of the following methods.

•

Press the

(PLATE CONTRAST)

key, then

“CURSOR” keys.

Select “MEDIUM” and press
(OK) key. If the initial setting is changed, the
contrast returns to the one you set.

•

Press (ALL CLEAR) key. In this case, all
settings are reset to standard mode.

“ Standard mode” asee p.10

e

Select

r

Set

READY

0

SHT

1

SET

Plate

contrast icon appears.

33

Adjusting Darkness dd[ Print Darkness ]

2You can adjust print darkness in eleven steps.

To make the print darker, select “DARK” (increased ink transfer amount).
To make the print lighter, select “LIGHT” (reduced ink transfer amount).

Adjusting Print Darkness

s

How to Adjust Print Darkness

Pressing (CANCEL) key redisplays the main screen.

1

Check that printing is not in progress.

4

Press “CURSOR” keys to select “PRINT
DARKNESS”.

5

Press (OK) key.
The selected print darkness is set.

"

Press (STOP) key if a print run is in progress.

IMPORTANT

:

2

Open the Panel cover.

3

Press (PRINT DARKNESS) key.

ADJUST PRINT DARKNESS WITH
AND PRESS

PRINT DARKNESS

LIGHT MEDIUM DARK

w

q

Printing

3.

¡

If you reset to Standard

Use one of the following methods.

•

Press the

(PRINT DARKNESS)

key, then

“CURSOR” keys.

Select “MEDIUM” and press

(OK) key. If the initial setting is changed, the print
darkness returns to the one you set.

•

Press (ALL CLEAR) key. In this case, all

settings are reset to standard mode.

“ Standard mode” asee p.10

(Advanced)

e

Select

r

Set

READY

0

SHT

1

SET

Print Darkness

icon appears.

34

Printing Photographs and Color Documents

S

Printing Photographs and Color Documents

You can adjust the print quality to match the quality of the document (text or photos).
You can also enhance text and lines, or process non-screened photographs.

A

Text Photograph

1234567890
abcdefghijkl
mnopqrstuv
wxyz

Text/Photograph

1234567890
abcdefghijkl
mnopqrstuv
wxyz

¡

Text/Photograph/Text and Photograph Mode

a

page 35

In this mode, the print quality is adjusted to match the document.

¡

Fine Text/Screen Mode

a

page 36

In this mode, fine text and lines are enhanced, and non-screened photographs are processed.

¡

Photo Dark Mode

a

page 37

In this mode, the gradations in dark areas of photos are reproduced in detail.

440249e

A

Text/Finelettering Photo/Finelettering Screen1 Screen2

1234567890
abcdefghijkl
mnopqrstuv
wxyz

1234567890
abcdefghijkl
mnopqrstuv
wxyz

Document With

Photo Dark

Without
Photo Dark

Printout

35

Printing Photographs and Color Documents dd[ Text / Photograph / Text & Photograph ]

Printing

3.

s

How to Set Text / Photo / Text and Photo Mode

Pressing (CANCEL) key redisplays the main screen.

2

Press (IMAGE MODE) key.

A list of the image items is displayed on the LCD panel.

2This function includes three modes for enhancing text and photographic documents.

TEXT

PHOTO
TEXT/PHOTO
TEXT FINE
PHOTO FINE
SCREEN1
SCREEN2
PHOTO DARK

IMAGE MODE

SELECT AN ITEM WITH
AND PRESS

3

Press“CURSOR” keys to select one item
in“TEXT, PHOTO, TEXT/PHOTO”.

4

Press (OK) key.
The item selected in step

3 is set.

5

Start platemaking and printing.
Proceed with steps

6

to 9of the sequence

described in “ Basic Printmaking”.

“ Basic Printmaking”

a

see p.14

TEXT

PHOTO

TEXT/PHOTO
TEXT FINE
PHOTO FINE
SCREEN1
SCREEN2
PHOTO DARK

SELECT AN ITEM WITH
AND PRESS

Text/Photograph/Text and Photograph Mode

1

Proceed with steps 1to 5of the sequence
described in “ Basic Printmaking".

“ Basic Printmaking”

a

see p.14

Select “Text/Photograph/Text and Photograph Mode” before starting platemaking.

IMPORTANT

:

Text mode : Enhances the printing of text documents

Documents suited for text mode :

a

Text documents

a

Documents that include black and white photos that have already been screen processed.

Photo mode : Enhances the printing of the subtle gradations of photographs and

light images from color documents.

Document suited for photo mode :

a

Light-colored color documents

a

Color photographs

a

Documents with non-screened black and white photographs

Text/Photograph mode

: Enhances the printing of documents with both text and photographs.

Documents suited for text/photograph mode :

a

Documents with both text and photographs.

Press

Select

Set

¡

If you reset to Standard

Use one of the following methods.

•

Press the

(IMAGE MODE)

key, then

“CURSOR” keys.

Select “

TEXT

” and press

(OK) key. If the initial setting is changed, the
image mode returns to the one you set.

•

Press (ALL CLEAR) key. In this case, all

settings are reset to standard mode.

“ Standard mode” asee p.10

(Advanced)

A 3

100%

0.0 mm

PHOTO

READY

0

SHT

1

SET

36

Printing Photographs and Color Documents dd[ Fine Text / Screen 1/2 ]

s

How to Set Fine Text / Screen Mode

Pressing (CANCEL) key redisplays the main screen.

2

Press (IMAGE MODE) key.

A list of the image items is displayed on the LCD panel.

2This machine has the following modes for enhancing the printing of fine text and screen

processing non-screened photographs.

3

Press“CURSOR” keys to select one item
in“TEXT FINE, PHOTO FINE,SCREEN1,
SCREEN2".

4

Press (OK) key.
The item selected in step

3 is set.

5

Start platemaking and printing.
Proceed with steps

6

to 9of the sequence

described in “ Basic Printmaking”.

“ Basic Printmaking”

a

see p.14

Fine Text/Screen Mode

1

Proceed with steps 1to 5of the sequence
described in “ Basic Printmaking”.

“ Basic Printmaking”

a

see p.14

Select “Fine Text/Screen Mode” before starting platemaking.

IMPORTANT

:

Text fine : Enhances the printing of documents containing fine text
Photos fine

: Enhances the printing of documents containing fine photographs

Screen 1/ 2 : Enhances the printing of non-screened photographs

TEXT
PHOTO
TEXT/PHOTO
TEXT FINE

PHOTO FINE

SCREEN1
SCREEN2
PHOTO DARK

SELECT AN ITEM WITH
AND PRESS

S

TEXT

PHOTO
TEXT/PHOTO
TEXT FINE
PHOTO FINE
SCREEN1
SCREEN2
PHOTO DARK

IMAGE MODE

SELECT AN ITEM WITH
AND PRESS

Press

Select

Set

¡

If you reset to Standard

Use one of the following methods.

•

Press the

(IMAGE MODE)

key, then

“CURSOR” keys.

Select “

TEXT

” and press

(OK) key. If the initial setting is changed, the
image mode returns to the one you set.

•

Press (ALL CLEAR) key. In this case, all
settings are reset to standard mode.

“ Standard mode” asee p.10

A 3

100%

0.0 mm

PHOTO FINE

READY

0

SHT

1

SET

S

37

Printing Photographs and Color Documents dd[ Photo Dark ]

s

How to Set Photo Dark Mode

Pressing (CANCEL) key redisplays the main screen.

2

Press (IMAGE MODE) key.

A list of the image items is displayed on the LCD panel.

2Photo Dark : This mode reproduces gradations in dark areas of photographs in detail.

3

Press “CURSOR” keys to select “PHOTO
DARK”.

4

Press (OK) key. The selected photo dark is set.

5

Start platemaking and printing.
Proceed with steps

6

to 9of the sequence

described in “ Basic Printmaking”.

“ Basic Printmaking”

a

see p.14

Photo Dark Mode

1

Proceed with steps 1to 5of the sequence
described in “ Basic Printmaking”.

“ Basic Printmaking”

a

see p.14

"Select “Photo Dark Mode” before starting platemaking.

IMPORTANT

:

Printing

3.

TEXT
PHOTO
TEXT/PHOTO
TEXT FINE
PHOTO FINE
SCREEN1
SCREEN2

PHOTO DARK

SELECT AN ITEM WITH
AND PRESS

TEXT

PHOTO
TEXT/PHOTO
TEXT FINE
PHOTO FINE
SCREEN1
SCREEN2
PHOTO DARK

IMAGE MODE

SELECT AN ITEM WITH
AND PRESS

Press

Select

Set

¡

If you reset to Standard

Use one of the following methods.

•

Press the

(IMAGE MODE)

key, then

“CURSOR” keys.

Select “

TEXT

” and press

(OK) key. If the initial setting is changed, the
image mode returns to the one you set.

•

Press (ALL CLEAR) key. In this case, all

settings are reset to standard mode.

“ Standard mode” asee p.10

(Advanced)

A 3

100%

0.0 mm

PHOTO DARK

READY

0

SHT

1

SET

38

Book Shadow Eraser Mode

S

Prints book documents without shadows

2

This mode erases the shadows caused by the book binding when printing an open spread from a

book or other folded document. It also erases the shadow around the periphery of the document.

"Select “Book Shadow Eraser Mode” before starting platemaking.

IMPORTANT

:

¡

CENTER SHADOW ERASER

Prints documents with only the 15mm center
shadow erased when printing an open spread
from a book or other folded document.

¡

OUTLINE SHADOW ERASER

Prints documents with only the 6mm
periphery erased when printing an open
spread from a book or other folded document.

¡

CENTER & OUTLINE SHADOW ERASER

Prints documents with both the 15mm center
shadow and 6mm periphery erased when
printing an open spread from a book or other
folded document.

¡

SPECIFY AREA

Prints documents with a specified area erased
when printing an open spread from a book or
other folded document. (The erase area can be
selected within the range 0 to 99 mm.)

"

Even if a margin (0 to 99mm) is set at ANY,
a slight error sometimes occurs.

"

Even if

“B”

or “C”is set to less than 3 mm,

the shadow is erased from approximately

3 mm around the periphery of the document.

IMPORTANT

:

"

The shadow is also erased from approximately

3 mm around the periphery of the document.

IMPORTANT

:

¡

No shadow erase

The shadow is erased from approximately
3mm around the periphery of the document.

440250aeE

O P

BAB

C

C

PO

Document

Specify Area (Set A, B & C)

With
shadow
eraser

O P

PO

Document

Center

With
shadow
eraser

440250eE

O P

PO

Outline

With
shadow
eraser

Document

O P

PO

Center & outline

With
shadow
eraser

Document

PO

O P

Without
shadow
eraser

Document

39

Book Shadow Eraser Mode

Printing

3.

"When you select “No shadow erase

”

, the shadow
is erased from approximately 3mm around the
periphery of the document.

" The margin at the printed leading edge is for

removing the paper from the drum.

-

SPECIFY AREA

-

"

Even if a numerical value smaller than to 6 mm

or larger than 8 mm is selected at ANY, a
margin of 6 to 8 mm is set for this leading edge
section.

"

Even if a margin (0 to 99mm) is set at ANY, a

slight error sometimes occurs.

"The shadow erase dimensions are as follows:

IMPORTANT

:

3 mm

3 mm

6

-

8 mm

¡

Without shadow eraser

¡

With shadow eraser

440251e

3 mm

3 mm

6

-

8 mm

s

Area of shadow eraser

(Advanced)

40

Book Shadow Eraser Mode

2

Open the Panel cover.

s

How to Set Book Shadow Eraser Mode

Pressing (CANCEL) key redisplays the main screen.

3

Press (BOOK SHADOW ERASER) key.
A list of the shadow erasure is displayed on the
LCD panel.

4

Press“CURSOR”keys to select one item.

Each press of

“CURSOR”

keys moves to a different

item that is displayed highlighted.

8

Start platemaking and printing.
Proceed with steps

6

to 9of the sequence

described in “ Basic Printmaking”.

“ Basic Printmaking”

a

see p.14

1

Proceed with steps 1to 5of the sequence
described in “ Basic Printmaking”.
Place the documents on the are platen glass.

“ Basic Printmaking”

a

see p.14

5

Press (OK) key.
The item selected in step

4 is set.

¡

When selecting “SPECIFY AREA” apage 41

OFF
CENTER

OUTLINE

CENTER & OUTLINE
SPECIFY AREA

SELECT AN ITEM WITH
AND PRESS

SHADOW ERASURE

w

q

¡

If you reset to Standard (off)

Use one of the following methods.

•

Press the

(

BOOK SHADOW ERASER)key,

then “CURSOR” keys.

Select “

OFF

” and press

(OK) key. If the initial setting is changed, the

image mode returns to the one you set.

•

Press (ALL CLEAR) key. In this case, all
settings are reset to standard mode.

“ Standard mode” asee p.10

t

Select

y

Set

READY

0

SHT

1

SET

Shadow erasure

icon appears.

e

Select

r

Set

AUTO

A3

B4
A 4 R
B 5 R
A 5 R
POST

MENT SIZE

ESS

AUTO

11 X 17

LG
LT R
ST

R

MAX
POST

MENT SIZE

ESS

¡

European

¡

U.S.

6

Press“CURSOR”keys to select document size.

Each press of

“CURSOR”

keys moves to a different

item that is displayed highlighted.

7

Press (OK) key.
The item selected in step

6 is set.

41

Book Shadow Eraser Mode dd[ SPECIFY AREA ]

Printing

3.

¡

If “SPECIFY AREA” is selected in step

4

q Press“CURSOR”keys to select “A”.
w Set the “erase area (0 to 99 mm)” using

“CURSOR” keys. The figure changes at each
press of “CURSOR” keys.

e

Press (OK) key. The “erase area” for “A” is

set.

Press (OK) key.
The item selected in step

4 is set.

The screen changes. Specify the sizes for “A”, “B”
and “C”.

r Press “CURSOR” keys to select “

B

”. Repeat

steps

w

and eto set sizes for “B” and “C”.

A = 0mm

B

=

0mm

C

=

0mm

CANCEL

BAB

C

C

SPECIFY AREA

SELECT AN ITEM WITH
AND PRESS

OFF
CENTER
OUTLINE
CENTER & OUTLINE

SPECIFY AREA

SHADOW ERASURE

(Advanced)

Select

Set

BA

A

Documents Printout

42

Multiple Printing on One Page

S

Multiple Printing on One Page

This mode allows you to print 2, 4, 8, or 16 copies of the document on one page.

2This mode prints multiple copies of the document

on one page. If you are reducing or enlarging, refer
to the following diagram to select the zoom ratio
and the orientation of the document.

A4
LT

A4
LT

A4
LT

A3 / LDG

Portrait
Placement

Zoom ratio :
100%

Multiple Printing

¡

Multiple Printing

a

page 42

This mode prints multiple copies of the document on one page.

¡

2-in-1 Layout (Option : available only with ADF installed )

a

page 44

This mode prints two different document pages
on one page.

¡

Copying A4 to A3 (2 prints on one page)

¡

Copying A4 to A3 (4 prints per page)

" Select “Multiple Printing” before starting

platemaking.

"The printable range is slightly smaller than the

printing paper.

"You cannot obtain the correct layout if you select

the wrong paper size.

IMPORTANT

:

Zoom ratio and orientation of the document

440252e

440253e

440255e

440254

A

A

A

AA

AA

AA

AA

AA

AA

AA

AA

AA

AA

AA

AA

AA

AA

A

A

A

Document

2

images

4

images

8

images

16

images

Document

Document

Document

A4
LT

A4
LT

A4
LT

A4
LT

A4
LT

A3 / LDG

Landscape
Placement

Zoom ratio :
50%

A7
(B8)

A6
(B7)

A5
(B6)

ST

A4
(B5)

LT

A3
(B4)

LDG

440252eE

43

Multiple Printing on One Page dd[ MULTI EXPOSURE ]

s

How to Set Multiple Printing

Pressing (CANCEL) key redisplays the main screen.

2

Open the Panel cover.

3

Press (MULTI EXPOSURE) key.
A list of the multi exposure is displayed on the
LCD panel.

4

Press“CURSOR”keys to select “2” to “16”.
Each press of “CURSOR” keys moves to a
different item that is displayed highlighted.

5

Press (OK) key.
The item selected in step

4 is set.

1

Proceed with steps 1to 5of the sequence
described in “ Basic Printmaking”.

“ Basic Printmaking”

a

see p.14

6

Start platemaking and printing.
Proceed with steps

6

to 9of the sequence

described in “ Basic Printmaking”.

“ Basic Printmaking”

a

see p.14

Printing

3.

A A

A A

A

SELECT AN ITEM WITH
AND PRESS

OFF
2

4

8
16
2 IN 1

MULTI EXPOSURE

w

q

¡

If you reset to Standard (off)

Use one of the following methods.

•

Press the

(MULTI EXPOSURE)

key, then

“CURSOR” keys.

Select “

OFF

” and press

(OK) key. If the initial setting is changed, the
image mode returns to the one you set.

•

Press (ALL CLEAR) key. In this case, all

settings are reset to standard mode.

“ Standard mode” asee p.10

(Advanced)

e

Select

r

Set

READY

0

SHT

1

SET

Multi Exposure

icon appears.

44

Multiple Printing on One Page dd[ 2-in-1 Layout ]

2Two-in-one (2-in-1) mode allows you to print two small documents on one page and also

easily print for creating booklets that will be saddle stitched.
When you use 2-in-1 mode, the layout is as follows:

B A D C

Printout1 Printout2Documents

(even number)

2-in-1 Layout [Available only with ADF installed ]

"Select “2-in-1 Layout” before starting platemaking.
"You cannot use 2-in-1 mode unless the optional ADF is installed.
"Always load the documents in the ADF.
"If you are printing the documents at 100%, select a printing paper that is the size of the two

documents.

"When you enlarge or reduce two documents size by side, select a zoom ratio so that the

documents fit exactly on one page.

"Note the following when using 2-in-1 layout mode:

"

You must load the document in the ADF in portrait orientation.

"

You must select a paper size and zoom ratio that will accommodate two documents.

"Correct layout may not be obtainable with other than standard size papers.

IMPORTANT

:

440256e

B A D C E

Printout1 Printout2Documents

(odd number)

Printout3

45

Multiple Printing on One Page dd[ 2-in-1 Layout ]

s

How to Set 2-in-1 Layout

Pressing (CANCEL) key redisplays the main screen.

2

Open the Panel cover.

3

Press (MULTI EXPOSURE) key.
A list of the multi exposure is displayed on the
LCD panel.

4

Press“CURSOR”keys to select “2 IN 1”.
Each press of “CURSOR” keys moves to a
different item that is displayed highlighted.

5

Press (OK) key.
The item selected in step

4 is set.

1

Proceed with steps 1to 5of the sequence
described in “ Basic Printmaking”.

“ Basic Printmaking”

a

see p.14

6

Start platemaking and printing.
Proceed with steps

6

to 9of the sequence

described in “ Basic Printmaking”.

“ Basic Printmaking”

a

see p.14

Printing

3.

¡

if you experience problems with layout

Check the following:

"Document orientation
"Document size, paper size, zoom ratio

SELECT AN ITEM WITH
AND PRESS

OFF
2
4
8
16

2 IN 1

MULTI EXPOSURE

A

B A

w

q

¡

If you reset to Standard (off)

Use one of the following methods.

•

Press the

(MULTI EXPOSURE)

key, then

“CURSOR” keys.

Select “

OFF

” and press

(OK) key. If the initial setting is changed, the
image mode returns to the one you set.

•

Press (ALL CLEAR) key. In this case, all

settings are reset to standard mode.

“ Standard mode” asee p.10

(Advanced)

e

Select

r

Set

READY

0

SHT

1

SET

2 in 1

icon appears.

46

Saving / Retrieving / Deleting the settings [User Settings]

S

Saving/Retrieving/Deleting the settings

2You can save, retrieve or delete the platemaking and print settings. The memory function

allows you to save nine sets of settings. These settings are stored in memory even when the
power is turned OFF.

The following settings are saved:

"

Number of prints (including sets)

"

Text/Photo

( text, photo, text&photo, fine, screen, etc.)

"

Print speed

"

Plate darkness

"

Paper selection

"

Plate contrast (text, photo, text

&

photo)

"

Zoom ratio (including Auto and zoom)"Print darkness

"

Print position

"

Book shadow eraser

"

Edit

"

Multi exposure

"

Batch print (15 sets)

NOTE

:

Saving Settings

s

How to Set Save

Pressing (CANCEL) key redisplays the main screen.

APER SIZE

B 4

86%

0.0 mm

0.0 mm

PHOTO

ZOOM

PRINT POS.

IMAGE MODE

READY

5

SHT

1

SET

2

Open the Panel cover.

3

Press (USER SETTING) key.
A list of the user setting is displayed on the
LCD panel.

4

Press “CURSOR” keys to select “1.JOB
SETTING MEMORY”.

5

Press (OK) key.
“1.JOB SETTING MEMORY” is set.

1

Check that the LCD panel reflects the settings
to be saved.

6

Press “CURSOR” keys to select
“SAVE”.

7

Press (OK) key. “SAVE” is set.

w

q

SELECT AN ITEM WITH
AND PRESS

USER SETTING

1.JOB SETTING MEMORY

2.INITIAL SETTING

JOB SETTING MEMORY

RETRIEVE

SAVE

DELETE

Select

Set

Select

Set

47

Saving the settings [User Settings] dd1. JOB SETTING MEMORY

8

Press “CURSOR” keys to select memory NO.

9

Press (OK) key.
“Select Memory No” is set.

In all, there are a total of nine memories

"

Currently used memories are prefixed with
the M memory mark. Select a memory not
prefixed with the M mark.

NOTE

:

¡

If other settings have already stored

Any previous settings stored in the
memory channel will be deleted when you
save new settings.

Press “CURSOR” keys to confirm
“Saved settings”.

¡

When the up/down cursor marks

are displayed on screen

You can display the previous or next
screen.

11

If the settings are correct, press (OK) key
to save.

10

Printing

3.

MEMORY 1

MEMORY 2

MEMORY 3
MEMORY 4
MEMORY 5
MEMORY 6
MEMORY 7
MEMORY 8
MEMORY 9

SELECT AN ITEM WITH
AND PRESS

JOB SETTING MEMORY

SAVE

BATCH PRINT

5

SHT 1 SET
PRINTING SPEED 3
PAPER SIZE

B4

ZOOM

86%

PRINT POSITION

0.0

mm

0.0

mm

IMAGE MODE

PHOTO

PLATE DARKNESS

0
PLATE CONTRAST
TEXT

0

PHOTO

0

TEXT/PHOTO

0

SAVE

CANCEL

PRINT DARKNESS

0

SHADOW ERASURE

OFF

MULTI EXPOSURE

OFF

EDIT OFF

SAVE

CANCEL

1

: 5 SHT 1 SET 9 : 0 SHT 0 SET

2

: 0 SHT 0 SET 10 : 0 SHT 0 SET

3

: 0 SHT 0 SET 11 : 0 SHT 0 SET

4

: 0 SHT 0 SET 12 : 0 SHT 0 SET

5

: 0 SHT 0 SET 13 : 0 SHT 0 SET

6

: 0 SHT 0 SET 14 : 0 SHT 0 SET

7

: 0 SHT 0 SET 15 : 0 SHT 0 SET

8

: 0 SHT 0 SET BATCH PRINT

SAVE

CANCEL

Select

Set

Select

Set

(Advanced)

48

Retrieving the settings [User Settings] dd1. JOB SETTING MEMORY

Retrieving Settings

s

How to Set Retrieve

Pressing (CANCEL) key redisplays the main screen.

1

Open the Panel cover.

2

Press (USER SETTING) key.
A list of the user setting is displayed on the
LCD panel.

3

Press “CURSOR” keys to select “1.JOB
SETTING MEMORY”.

4

Press (OK) key.
“1.JOB SETTING MEMORY” is set.

5

Press“CURSOR”keys to select “RETRIEVE”.

6

Press (OK) key. “RETRIEVE” is
set.

7

Press “CURSOR” keys to select
memory NO.

8

Press (OK) key.
“Select Memory No” is set.

In all, there are a total of nine memories

"

Currently used memories are prefixed with
the M memory mark. Select a memory not
prefixed with the M mark.

NOTE

:

MEMORY 1

MEMORY 2

MEMORY 3
MEMORY 4
MEMORY 5
MEMORY 6
MEMORY 7
MEMORY 8
MEMORY 9

SELECT AN ITEM WITH
AND PRESS

JOB SETTING MEMORY

RETRIEVE

w

q

SELECT AN ITEM WITH
AND PRESS

USER SETTING

1.JOB SETTING MEMORY

2.INITIAL SETTING

3.OPTIMIZE PRINT

4.DOCUMENT MEMORY

5.DOCUMENT DENSITY DETECTION

6.FEED HEAVY WEIGHT PAPER

7.ONLINE MODE

8.CANCEL

SELECT AN ITEM WITH
AND PRESS

JOB SETTING MEMORY

RETRIEVE

SAVE
DELETE
CANCEL

Select

Set

Select

Set

Select

Set

49

Retrieving the settings [User Settings] dd1. JOB SETTING MEMORY

Press “CURSOR” keys to confirm “item”.

10

If the settings are correct, press (OK) key .

9

11

Check that the “Memory indicator ” has
appeared.

BATCH PRINT

5

SHT 1 SET
PRINTING SPEED 3
PAPER SIZE

B4

ZOOM

86%

PRINT POSITION

0.0

mm

0.0

mm

IMAGE MODE

PHOTO

PLATE DARKNESS

0
PLATE CONTRAST
TEXT

0

PHOTO

0

TEXT/PHOTO

0

RETRIEVE

CANCEL

PRINT DARKNESS

0

SHADOW ERASURE

OFF

MULTI EXPOSURE

OFF

EDIT OFF

RETRIEVE

CANCEL

1

: 5 SHT 1 SET 9 : 0 SHT 0 SET

2

: 0 SHT 0 SET 10 : 0 SHT 0 SET

3

: 0 SHT 0 SET 11 : 0 SHT 0 SET

4

: 0 SHT 0 SET 12 : 0 SHT 0 SET

5

: 0 SHT 0 SET 13 : 0 SHT 0 SET

6

: 0 SHT 0 SET 14 : 0 SHT 0 SET

7

: 0 SHT 0 SET 15 : 0 SHT 0 SET

8

: 0 SHT 0 SET BATCH PRINT

RETRIEVE

CANCEL

Printing

3.

¡

When the up/down cursor marks
are displayed on screen

You can display the previous or next
screen.

Select

Set

(Advanced)

READY

0

SHT

1

SET

12

Start platemaking and printing.
Proceed with steps

6

to 9of the sequence

described in “ Basic Printmaking”.

“ Basic Printmaking”

a

see p.14

Memory indicator

"

Appears when Memory is set.

NOTE

:

50

Deleting the settings [User Settings] dd1. JOB SETTING MEMORY

Deleting Settings

s

How to Set Delete

Pressing (CANCEL) key redisplays the main screen.

1

Open the Panel cover.

2

Press (USER SETTING) key.
A list of the user setting is displayed on the
LCD panel.

3

Press “CURSOR” keys to select “1.JOB
SETTING MEMORY”.

4

Press (OK) key.
“1.JOB SETTING MEMORY” is set.

5

Press“CURSOR”keys to select “DELETE”.

6

Press (OK) key. “DELETE” is set.

SELECT AN ITEM WITH
AND PRESS

JOB SETTING MEMORY

RETRIEVE
SAVE

DELETE

CANCEL

w

q

SELECT AN ITEM WITH
AND PRESS

USER SETTING

1.JOB SETTING MEMORY

2.INITIAL SETTING

3.OPTIMIZE PRINT

4.DOCUMENT MEMORY

5.DOCUMENT DENSITY DETECTION

6.FEED HEAVY WEIGHT PAPER

7.ONLINE MODE

8.CANCEL

Select

Set

Select

Set

7

Press “CURSOR” keys to select the
“memory NO to delete”.

8

Press (OK) key. The contents of the
selected “memory NO” are deleted.

In all, there are a total of nine memories

"

Currently used memories are prefixed with
the M memory mark. Select a memory not
prefixed with the M mark.

NOTE

:

MEMORY 1

MEMORY 2

MEMORY 3
MEMORY 4
MEMORY 5
MEMORY 6
MEMORY 7
MEMORY 8
MEMORY 9

SELECT AN ITEM WITH
AND PRESS

JOB SETTING MEMORY

RETRIEVE

Select

Set

51

Batch Printing

S

Types of batch prints

2You can print the specified number of sets of prints in each set.

¡

Batch Printing

a

page 52

The machine stops after each set of prints.

¡

Sequential Batch Printing

a

page 54

This function changes the number of prints made from each document.

440257e

A

C

C

C

B

B

A

A AA

Document

1st set
4 copies x 2 sets

2nd set
3 copies x 3 sets

3rd set
2 copies x 4 sets

Printing

3.

C

C

C

B

B

A

B CA A

Documents

1st document
4 copies x 2 sets

2nd document
3 copies x 3 sets

3rd document
2 copies x 4 sets

(Advanced)

52

2Prints are made of specified sets of prints with a specified number of prints to a set.

Up to 15 specified number of prints and sets of prints can be collectively set as a single set.
When the tape cluster (option) is mounted, insert the tape when each set has finished being printed.

Batch Printing

"“Batch Printing” can be selected after platemaking.

"

Set selection of “Batch Printing” and “Sequential Batch Printing” at Special Functions.asee p.73

The default setting is “Batch Printing”.

IMPORTANT

:

s

How to Set Batch Printing

Pressing (CANCEL) key redisplays the main screen.

2

Using the key pad, enter the number of prints.

Example: 25

¡

If you make a mistake

If you make a mistake, start over again by
press (CLEAR) key and start from the
beginning. When you press (CLEAR) key,
both the number of prints and the number
of sets are cancelled.

¡

Example:

When “2” and “5” are pressed
on the keypad.

w

q

3

Press key.
The current set is displayed on the LCD panel.

Example: 1st set

READY

25

SHT

1

SET

ENTER THE SHT / SET

1

:

0

SHT 0

SET

9

:

0

SHT 0

SET

2

:

0

SHT 0

SET

10

:

0

SHT 0

SET

3

:

0

SHT 0

SET

11

:

0

SHT 0

SET

4

:

0

SHT 0

SET

12

:

0

SHT 0

SET

5

:

0

SHT 0

SET

13

:

0

SHT 0

SET

6

:

0

SHT 0

SET

14

:

0

SHT 0

SET

7

:

0

SHT 0

SET

15

:

0

SHT 0

SET

8

:

0

SHT 0

SET BATCH PRINT

25

SHT

0

SET

Batch Printing

1

Proceed with steps 1to 5of the sequence
described in “ Basic Printmaking”.

“ Basic Printmaking”

a

see p.14

Batch Printing

53

4

Use the key pad to enter the number of sets.

Example: 3 sets

5

Press key.
The LCD panel changes to indicate the number
of prints, and the first entered number of
prints is displayed.

6

Repeat steps 2 to 5.

7

Check the settings for any errors using the
“Current Setting Function”.

“Current Setting Function”

a

see p.94

8

Press (PLATEMAKING) key.
The print runs starts from the last-entered set.

Printing

3.

"

(PLATEMAKING) key will not work until

all the sets have been printed.

"

Press (STOP) key then (CLEAR) key
to abort the print run.

IMPORTANT

:

ENTER THE SHT / SET

1

:

25

SHT 3

SET

9

:

0

SHT 0

SET

2

:

0

SHT 0

SET

10

:

0

SHT 0

SET

3

:

0

SHT 0

SET

11

:

0

SHT 0

SET

4

:

0

SHT 0

SET

12

:

0

SHT 0

SET

5

:

0

SHT 0

SET

13

:

0

SHT 0

SET

6

:

0

SHT 0

SET

14

:

0

SHT 0

SET

7

:

0

SHT 0

SET

15

:

0

SHT 0

SET

8

:

0

SHT 0

SET BATCH PRINT

25

SHT

3

SET

PAPER SIZE

A 3

100%

0.0 mm

0.0 mm

TEXT

ZOOM

PRINT POS.

IMAGE MODE

READY

25

SHT

3

SET

¡

If you make a mistake

If you make a mistake, start over again by
press (CLEAR) key and start from the
beginning. When you press (CLEAR) key,
both the number of prints and the number
of sets are cancelled.

(Advanced)

Batch Printing ddSequential Batch Printing

54

2You can change the number of prints made from each document. You can separate the

number of prints for up to 15 documents.

Sequential Batch Printing

"“Sequential Batch Printing” can be selected after platemaking.

"

Set selection of “Batch Printing” and “Sequential Batch Printing” at Special Functions.asee p.73

The default setting is “Batch Printing”.

IMPORTANT

:

s

How to Set Sequential Batch Printing

Pressing (CANCEL) key redisplays the main screen.

1

SELECT AN ITEM WITH
AND PRESS

SPECIAL FUNCTION

1.FINE START AUTO

2.AUTO CLEAR

5

MIN

3.PRE-PRINT

3

PRINTS

4.BATCH PRINT BATCH

5.AUTO POWER OFF

OFF

w

q

¡

Example:

When “2” and “5” are pressed
on the keypad.

w

q

READY

25

SHT

1

SET

Using (SPECIAL FUNCTION) key, set the
print quantity input mode to “4.BATCH
PRINT”. “4.BATCH PRINT”

a see p.72

2

Using the key pad, enter the number of prints.

Example: 25

¡

If you make a mistake

If you make a mistake, start over again by
press (CLEAR) key and start from the
beginning. When you press (CLEAR) key,
both the number of prints and the number
of sets are cancelled.

3

Press key.
The current set is displayed on the LCD panel.

Example: 1st set

Batch Printing ddSequential Batch Printing

55

Printing

3.

9

Press (PLATEMAKING) key.
Platemaking starts.

When the print run for the first document has
completed, load the next document on the
document glass plate.

12

Steps 9and 10are repeated until the entered
sets are completed.

"

Using the optional tape cluster and optional
ADF you can successively perform the
platemaking and collating of prints of
multiple documents.

NOTE

:

¡

If you are using the ADF

If you are using the ADF, load the document
for the first-entered number of prints and
sets at the bottom and the document for
the last-entered number of prints and sets
uppermost.

10

"

Platemaking and printing starts from the

last-entered print and set quantities.

IMPORTANT

:

11

Press (PLATEMAKING) key. Platemaking
and printing of the next document starts.

ENTER THE SHT / SET

1

:

0

SHT 0

SET

9

:

0

SHT 0

SET

2

:

0

SHT 0

SET

10

:

0

SHT 0

SET

3

:

0

SHT 0

SET

11

:

0

SHT 0

SET

4

:

0

SHT 0

SET

12

:

0

SHT 0

SET

5

:

0

SHT 0

SET

13

:

0

SHT 0

SET

6

:

0

SHT 0

SET

14

:

0

SHT 0

SET

7

:

0

SHT 0

SET

15

:

0

SHT 0

SET

8

:

0

SHT 0

SET BATCH PRINT

25

SHT

0

SET

ENTER THE SHT / SET

1

:

25

SHT 3

SET

9

:

0

SHT 0

SET

2

:

0

SHT 0

SET

10

:

0

SHT 0

SET

3

:

0

SHT 0

SET

11

:

0

SHT 0

SET

4

:

0

SHT 0

SET

12

:

0

SHT 0

SET

5

:

0

SHT 0

SET

13

:

0

SHT 0

SET

6

:

0

SHT 0

SET

14

:

0

SHT 0

SET

7

:

0

SHT 0

SET

15

:

0

SHT 0

SET

8

:

0

SHT 0

SET BATCH PRINT

25

SHT

3

SET

READY

25

SHT

3

SET

4

Use the key pad to enter the number of sets.

Example: 3 sets

5

Press key.
The LCD panel changes to indicate the number
of prints, and the first entered number of
prints is displayed.

6

Repeat steps 2 to 5.

7

Check the settings for any errors using the
“Current Setting Function".

“Current Setting Function”

a

see p.94

8

Proceed with steps 2to 5of the sequence
described in “ Basic Printmaking”.

“ Basic Printmaking”

a

see p.14

(Advanced)

56

Batch Printing ddSetting the Tape

2Only the specified number of sets is printed with the specified number of prints taken as one

set. Paper tape is inserted when printing of each set is completed. You can enter up to 15
groups of number of prints x number of sets.

Dividing Sections with Tape [ Available only with Tape Cluster Device ]

"The optional tape cluster is required for dividing sections with tape.

When using this function, refer to the Instruction Manual for the “Tape Cluster”.

IMPORTANT

:

s

Caution when Setting the Tape

"

Since the cutter blade is uncovered,

do not touch or keep your fingers away

from it.

WARNING

57

Other Functions

4.

¡ Confidential Safeguard Function .............58

¡Total Counter Display Function.....................59

¡ Print Speed Adjustment Function ..........60

¡Printing Position Adjustment Function ...61

Printing Position Adjustment............................61

Position Reset..................................................62

¡Edit Function .............................................63

¡Special Functions ...................................64

Fine Start “Startup Time Setting”.....................64

Fine Start “Operation at Next Platemaking”.....66

Auto Clear.........................................................68

Preprint.............................................................70

Batch Print Mode..............................................72

Auto Power Off.................................................74

Auto LCD Off....................................................76

Ink Circulation...................................................78

Tape Cluster Mode

[ Available only with Tape Cluster Unit ].......................80

Double Feed Detection.....................................82

Drum Size Mode

[ Available only with A3/A4 Drum ]..............................84

¡User Setting Function .............................86

Initial Setting.....................................................86

Optimize Print Mode.........................................88

Document Memory Mode.................................89

Document Density Detection Mode..................90

Feed Heavy Weight Paper.............................92

Online Mode...................................................93

¡ Current Setting Function ......................94

¡On-Line Print Function

[ Available Only With Interface Kit Installed ]..........95

58

Confidential Safeguard Function

[ Confidential ]

s

Confidential Safeguard Function

2The confidential safeguard function, which prevents printing unless platemaking has been

completed, is a simple means of prohibiting others from printing sensitive documents.

"

When the Confidential Safeguard function is ON, printing cannot be performed with

(PRINT) or (TEST PRINT) keys. Other operations can be performed as normal.

"Turning the power OFF does not turn the Confidential Safeguard function OFF.
"Once platemaking is carried out, the Confidential Safeguard function is cleared.
"Platemaking still functions even if the Confidential Safeguard function in ON.

IMPORTANT

:

s

How to Set Confidential Safeguard Function

Pressing (CANCEL) key redisplays the main screen.

5

Press (TEST PRINT) key to check that no print
is made.

SELECT AN ITEM WITH
AND PRESS

CONFIDENTIAL

ON

CANCEL

¡

While the Confidential Safeguard function is “ON”

The message “CANNOT PRINT” is
displayed on the LCD panel and the
machine will not print when you press
(PRINT) or (TEST PRINT) key.

w

q

1

Open the Panel cover.

2

Press (CONFIDENTIAL SAFEGUARD) key.
The confidential safeguard Function is
displayed on the LCD panel.

3

Press“CURSOR”keys to select “ON”.
Each press of “CURSOR” keys moves to a
different item that is displayed highlighted.

4

Press (OK) key.
The confidential safeguard function is set.

e

Select

r

Set

READY

0

SHT

1

SET

Confidential safeguard

icon appears.

59

Total Counter Display Function

[ STOP key ]

s

Total Counter Display Function

This function displays the total numbers of prints and plates on the LCD panel.

s

How to Set Total Counter Display Function

1

Check that the machine is not printing.

2

Press (STOP) key.
The total print and plate counts are displayed
while you press and hold (STOP) key.

The total number of prints is shown at the
top of the LCD panel; the total number of
plates is shown at the bottom.

Example: In this example, the total number of

prints is 455432, and the total
number of plates is 245.

A 3

100%

0.0 mm

0.0 mm

TEXT

ZOOM

PRINT POS.

IMAGE MODE

0

SHT

1

SET

P 0455432
F 000245

¡

If the machine is printing

Press (STOP) key to stop the print run.

Other Functions

4.

60

Print Speed Adjustment Function

[ Print Speed ]

s

Print Speed Adjustment Function

2

The print speed can be adjusted in 5 steps between 45 pages per minute and 130 pages per minute.

The default setting when the power is turned ON is about 100 pages per minute (standard
speed). However, that when initial settings have been changed in user settings, the print
speed becomes the currently set print speed.

"Paper jams may become more frequent and the paper stacking deteriorate at high and low

speeds with certain types of paper and with certain images. Use the (LOW) and
(HIGH) keys to select the optimum print speed.

"

The prints may be slightly lighter at high print speeds and slightly darker at slow print speeds.

"You can adjust the print speed while the machine is printing.
"You can adjust the print speed with “OPTIMIZE PRINT MODE

”

(asee p.88

).

NOTE

:

s

How to Set Print Speed Adjustment Function

1

Press (LOW) or (HIGH) key to adjust
the speed.

2Press (LOW) key a

to decelerate printing. The speed lamp
moves to the left.

2Press (HIGH) key a

to accelerate printing. The speed lamp
moves to the right.

¡

To return to the default setting (about

100 pages per minute)

use one of the following two methods:

"

Press (LOW)or (HIGH) key repeatedly

until the center speed lamp is lit.

"

Press (ALL CLEAR) key. In this case, all

settings are reset to standard mode.

“ Standard mode” asee p.10
However, that when initial settings have been
changed in user settings, the print speed
becomes the currently set print speed.

"

Do not press (ALL CLEAR) key while

the machine is printing.

IMPORTANT

:

61

Printing Position Adjustment Function

[ Print Position ]

S

Printing Position Adjustment Function

After platemaking has finished, you can fine-tune the position of the printed image 1.5cm
in the vertical direction and 1.0cm in the horizontal direction). This position adjustment can
be performed in one of two ways: on the print position screen and on the main screen.

"

You cannot adjust while printing. Stop the operation with (STOP) key to adjust the

position.

IMPORTANT

:

s

How to Set Printing Position Adjustment

Pressing (CANCEL) key redisplays the main screen

.

1

Press (PRINT POSITION) key.

2

Press“CURSOR”keys to select “ADJUST”.
Each press of “CURSOR” keys moves to a
different item and that item is displayed
highlighted.

3

Press (OK) key.
The printing position adjustment is displayed on the
LCD panel.

5

Press“CURSOR” keys (left/right). Adjust the
printing position in the horizontal direction.
Each press of “CURSOR” keys changes the
printing position by 0.5mm.

4

Press“CURSOR” keys (up/down). Adjust the
printing position in the vertical direction.
Each press of “CURSOR” keys changes the
printing position by 0.5mm.

Printing Position Adjustment

Other Functions

4.

0.0 mm

0.0 mm

0.0 mm

0.0 mm

SELECT AN ITEM WITH
AND PRESS

PRINT POS.

ADJUST

RESET
CANCEL

0.5 mm

0.0 mm

0.0 mm

0.0 mm

SELECT AN ITEM WITH
AND PRESS

Press

0.0 mm

0.0 mm

0.5 mm

0.0 mm

SELECT AN ITEM WITH
AND PRESS

6

Press (OK) key

when the position adjustment

is complete. The setting is finished.

Select

Set

Select

Set

APER SIZE

A 3

100%

0.5 mm

0.5 mm

TEXT

ZOOM

PRINT POS.

IMAGE MODE

62

A 3

100%

0.5 mm

0.5 mm

TEXT

ZOOM

PRINT POS.

IMAGE MODE

1

SET

s

When Adjusting from Initial Screen

1

Check if the machine is in the “printing” status.

¡

If the machine is printing

Press (STOP) key.

3

Press“CURSOR” keys (left/right). Adjust the
printing position in the horizontal direction.
Each press of “CURSOR” keys changes the
printing position by 0.5mm.

2

Press“CURSOR” keys (up/down). Adjust the
printing position in the vertical direction.
Each press of “CURSOR” keys changes the
printing position by 0.5mm.

s

How to Set Position Reset

Pressing (CANCEL) key redisplays the main screen.

1

Press (PRINT POSITION) key.

3

Press (OK) key

when the position adjustment

is complete. The setting is finished.

2

Press“CURSOR”keys to select reset in the
“RESET”.

Position Reset

¡

To return to the default setting

"

Press (ALL CLEAR) key. In this case, all

settings are reset to standard mode.

“ Standard mode” asee p.10

Do not press (ALL CLEAR) key while printing.

0.5 mm

0.0 mm

0.5 mm

0.0 mm

SELECT AN ITEM WITH
AND PRESS

PRINT POS.

ADJUST

RESET
CANCEL

0.5 mm

0.0 mm

0.5 mm

mm

AND PRESS

PRINT POS.

ADJUST

RESET

CANCEL

PAPER SIZE

A 3

100%

0.0 mm

0.0 mm

TEXT

ZOOM

PRINT POS.

IMAGE MODE

1

SET

q

AdjustmentwAdjustment

Press

Select

Set

Upper indication

(Vertical)

Lower indication

(Horizontal)

[ Printing Position ]

63

Edit Function

[ Edit ]

s

Edit Function

This function is for rotating documents on the digital scan image.

s

How to Set Edit Function

Pressing (CANCEL) key redisplays the main screen.

1

Open the Panel cover.

2

Press (EDIT) key.
The edit setting is displayed on the LCD panel.

3

Press“CURSOR” keys to select either rotation
“90 degrees” or “180 degrees”.
Each press of “CURSOR” keys moves to a
different item and that item is displayed
highlighted.
This function does not work when ”SETTING
OFF” is selected.

4

Press (OK) key

set the edit function.

Other Functions

4.

SELECT AN ITEM WITH
AND PRESS

EDIT

OFF

ROTATE

90

DEGREES

ROTATE

180

DEGREES

w

q

e

Select

r

Set

READY

0

SHT

1

SET

Edit

icon appears.

64

Fine Start “Startup Time Setting” [ Special Functions ]

s

Fine Start “Startup Time Setting”

This function allows you to specify whether or not fine-start mode is used (The default setting is “OFF").
The Fine Start Mode automatically checks the time elapsed since the printer was last used and the
room temperature, and then selects the optimal operational settings to ensure the first page is printed
clearly and vividly.

"

When the Fine Start mode is functioning, it may take longer than usual for the first page to be

printed out following platemaking.

"

When the temperature is below 10yy, the first few pages printed out may not be imaged

perfectly even when the Fine Start mode is ON.

IMPORTANT

:

s

How to Set Fine Start“Startup Time Setting”

Pressing (CANCEL) key redisplays the main screen.

1

Open the Panel cover.

2

Press (SPECIAL FUNCTION) key.
The “SPECIAL FUNCTION” is displayed on the
LCD panel.

3

Press “CURSOR” keys to select “ 1. FINE START”.

Each press of

“CURSOR”

keys moves to a different

item and that item is displayed highlighted.

4

Press (OK) key.
The item selected in step

3 is set.

5

Press “CURSOR” keys to select “AUTO
SELECTION”.

6

Press (OK) key.
The item selected in step

5 is set.

SELECT AN ITEM WITH
AND PRESS

SPECIAL FUNCTION

1.FINE START OFF

2.AUTO CLEAR OFF

3.PRE-PRINT

0

PRINTS

4.BATCH PRINT BATCH

5.AUTO POWER OFF

OFF

6.AUTO LCD OFF

OFF

7.INK CIRCULATION

8.TAPE CLUSTER

OFF

9.DOUBLE FEED DETECTION OFF

w

q

SELECT AN ITEM WITH
AND PRESS

FINE START

AUTO SELECTION

ENABLE IN NEXT JOB
CANCEL

Select

Set

Select

Set

65

[ Special Function ] dd1. Fine Start “Startup Time Setting”

7

Press“CURSOR”keys to select “FINE START”.

8

Press (OK) key.
The item selected in step

7 is set.

AUTO:

6 HOUR:

12 HOUR:

OFF:
CANCEL:

The machine operates with conditions appropriate
for the amount of time that has elapsed.
The machine operates with maximum conditions
if 6 or more hours has elapsed. If less than 6
hours has elapsed, fine start does not function.
The machine operates with maximum conditions
if 12 or more hours has elapsed. If less than 12
hours has elapsed, fine start does not function.
The fine start mode is set OFF.
The fine start mode screen is canceled.

9

Press“CURSOR”keys to select “11. END”.

Press (OK) key.
The setting is finished.

10

Example : when 6 hours is set

The “FINE START” setting in the “SPECIAL
FUNCTION Screen” changes to “6 HOURS”

"Pressing (SPECIAL FUNCTION) key

set the fine start function also.

NOTE

:

Other Functions

4.

SELECT AN ITEM WITH
AND PRESS

AUTO SELECT AFTER

AUTO

6 HOURS

12 HOURS
OFF
CANCEL

SELECT AN ITEM WITH
AND PRESS

SPECIAL FUNCTION

1.FINE START 6 HOURS

2.AUTO CLEAR OFF

3.PRE-PRINT 0 PRINTS

4.BATCH PRINT BATCH

5.AUTO POWER OFF

OFF

6.AUTO LCD OFF

OFF

7.INK CIRCULATION

8.TAPE CLUSTER

OFF

9.DOUBLE FEED DETECTION OFF

SELECT AN ITEM WITH
AND PRESS

SPECIAL FUNCTION

3.PRE-PRINT 0 PRINTS

4.BATCH PRINT BATCH

5.AUTO POWER OFF

OFF

6.AUTO LCD OFF

OFF

7.INK CIRCULATION

8.TAPE CLUSTER

OFF

9.DOUBLE FEED DETECTION OFF

10.DRUM SIZE A3 DRUM

11.END

Select

Set

Select

Set

66

Fine Start “Operation at Next Platemaking”

[ Special Functions ]

s

Fine Start “Startup Time Setting”

This setting forces the machine to operate once under maximum conditions the first time a plate is

made after the drum is replaced, regardless of the elapsed time.

3

Press “CURSOR” keys to select “ 1. FINE START”.

Each press of

“CURSOR”

keys moves to a different

item and that item is displayed highlighted.

4

Press (OK) key.
The item selected in step

3 is set.

5

Press“CURSOR” keys to select “ENABLE IN
NEXT JOB".

6

Press (OK) key.
The item selected in step

5 is set.

SELECT AN ITEM WITH
AND PRESS

SPECIAL FUNCTION

1.FINE START OFF

2.AUTO CLEAR OFF

3.PRE-PRINT

0

PRINTS

4.BATCH PRINT BATCH

5.AUTO POWER OFF

OFF

6.AUTO LCD OFF

OFF

7.INK CIRCULATION

8.TAPE CLUSTER

OFF

9.DOUBLE FEED DETECTION OFF

SELECT AN ITEM WITH
AND PRESS

FINE START

AUTO SELECTION

ENABLE IN NEXT JOB

CANCEL

s

How to Set Fine Start “Operation at Next Platemaking”

Pressing (CANCEL) key redisplays the main screen.

1

Open the Panel cover.

2

Press (SPECIAL FUNCTION) key.
The “SPECIAL FUNCTION” is displayed on the
LCD panel.

w

q

Select

Set

Select

Set

67

[ Special Function ] dd1. Fine Start “Operation at Next Platemaking”

7

Press“CURSOR”keys to select one item.

8

Press (OK) key.
The item selected in step

7 is set.

ON:
OFF:
CANCEL:

Operation at Next Platemaking
Default
Cancels this screen, and redisplays the

previous screen.

Example : when ON is set

The “FINE START” setting in the “SPECIAL
FUNCTION Screen” changes to “ON”

Other Functions

4.

SELECT AN ITEM WITH
AND PRESS

ENABLE IN NEXT JOB

ON

OFF
CANCEL

SELECT AN ITEM WITH
AND PRESS

SPECIAL FUNCTION

1.FINE START ON

2.AUTO CLEAR OFF

3.PRE-PRINT

0

PRINTS

4.BATCH PRINT BATCH

5.AUTO POWER OFF

OFF

6.AUTO LCD OFF

OFF

7.INK CIRCULATION

8.TAPE CLUSTER

OFF

9.DOUBLE FEED DETECTION OFF

9

Press“CURSOR”keys to select “11. END”.

Press (OK) key.
The setting is finished.

10

"Pressing (SPECIAL FUNCTION) key

set the fine start function also.

NOTE

:

SELECT AN ITEM WITH
AND PRESS

SPECIAL FUNCTION

3.PRE-PRINT 0 PRINTS

4.BATCH PRINT BATCH

5.AUTO POWER OFF

OFF

6.AUTO LCD OFF

OFF

7.INK CIRCULATION

8.TAPE CLUSTER

OFF

9.DOUBLE FEED DETECTION OFF

10.DRUM SIZE A3 DRUM

11.END

Select

Set

Select

Set

68

Auto Clear [ Special Functions ]

s

Auto Clear

This function automatically clears the display (settings) on the control panel when the machine is not
operated for a specified period of time. The specified time period can be set for 5 minutes, 10 minutes,
15 minutes, or OFF. (The default setting is “OFF".)

3

Press“CURSOR” keys to select “2.AUTO
CLEAR”.

Each press of

“CURSOR”

keys moves to a different

item and that item is displayed highlighted.

4

Press (OK) key.
The item selected in step

3 is set.

SELECT AN ITEM WITH
AND PRESS

SPECIAL FUNCTION

1.FINE START ON

2.AUTO CLEAR OFF

3.PRE-PRINT

0

PRINTS

4.BATCH PRINT BATCH

5.AUTO POWER OFF

OFF

6.AUTO LCD OFF

OFF

7.INK CIRCULATION

8.TAPE CLUSTER

OFF

9.DOUBLE FEED DETECTION OFF

s

How to Set Auto Clear

Pressing (CANCEL) key redisplays the main screen.

1

Open the Panel cover.

2

Press (SPECIAL FUNCTION) key.
The “SPECIAL FUNCTION” is displayed on the
LCD panel.

w

q

Select

Set

69

[ Special Function ] dd2. Auto Clear

5

Press“CURSOR”keys to select the auto clear
time.

6

Press (OK) key.
The item selected in step

5 is set.

5 MIN:
10 MIN:
15 MIN:
OFF:
CANCEL:

Auto Clear : 5 minutes
Auto Clear : 10 minutes
Auto Clear : 15 minutes
Default
Cancels this screen, and redisplays the

previous screen.

Example : when 5 minutes is set

The “AUTO CLEAR” setting in the “SPECIAL
FUNCTION Screen” changes to “5 MIN”

Other Functions

4.

SELECT AN ITEM WITH
AND PRESS

AUTO CLEAR

5 MIN

10 MIN
15 MIN
OFF
CANCEL

SELECT AN ITEM WITH
AND PRESS

SPECIAL FUNCTION

1.FINE START AUTO

2.AUTO CLEAR

5

MIN

3.PRE-PRINT

0

PRINTS

4.BATCH PRINT BATCH

5.AUTO POWER OFF

OFF

6.AUTO LCD OFF

OFF

7.INK CIRCULATION

8.TAPE CLUSTER

OFF

9.DOUBLE FEED DETECTION OFF

7

Press“CURSOR”keys to select “11. END”.

Press (OK) key.
The setting is finished.

"Pressing (SPECIAL FUNCTION) key

set the fine start function also.

NOTE

:

SELECT AN ITEM WITH
AND PRESS

SPECIAL FUNCTION

3.PRE-PRINT 0 PRINTS

4.BATCH PRINT BATCH

5.AUTO POWER OFF

OFF

6.AUTO LCD OFF

OFF

7.INK CIRCULATION

8.TAPE CLUSTER

OFF

9.DOUBLE FEED DETECTION OFF

10.DRUM SIZE A3 DRUM

11.END

8

Select

Set

Select

Set

70

Preprint [ Special Functions ]

s

Preprint

This function disables counting for a specified number of prints following the start of a printing
operation. For example, if you set the Preprint mode to three (3) pages, the count function ignores the
first three pages printed, and starts counting from the fourth printed page. You can set 0 (default) to 15.

3

Press“CURSOR”keys to select “3.PRE-PRINT”.

Each press of

“CURSOR”

keys moves to a different

item and that item is displayed highlighted.

4

Press (OK) key.
The item selected in step

3 is set.

SELECT AN ITEM WITH
AND PRESS

SPECIAL FUNCTION

1.FINE START AUTO

2.AUTO CLEAR

5

MIN

3.PRE-PRINT

0

PRINTS

4.BATCH PRINT BATCH

5.AUTO POWER OFF

OFF

6.AUTO LCD OFF

OFF

7.INK CIRCULATION

8.TAPE CLUSTER

OFF

9.DOUBLE FEED DETECTION OFF

s

How to Set Preprint

Pressing (CANCEL) key redisplays the main screen.

1

Open the Panel cover.

2

Press (SPECIAL FUNCTION) key.
The “SPECIAL FUNCTION” is displayed on the
LCD panel.

w

q

Select

Set

71

[ Special Function ] dd3. Preprint

5

Press“CURSOR” keys to select the pre-print
number.

6

Press (OK) key.
The item selected in step

5 is set.

0 :
3 PRINTS

:

CANCEL:

Default
PRE-PRINT : 3 prints
Cancels this screen, and redisplays the

previous screen.

Example : when 3 prints is set

The “PRE-PRINT” setting in the “SPECIAL
FUNCTION Screen” changes to “3 PRINTS”

Other Functions

4.

SELECT PRE-PRINT QUANTITY WITH
AND PRESS

PRE-PRINT

3 PRINTS

CANCEL

SELECT AN ITEM WITH
AND PRESS

SPECIAL FUNCTION

1.FINE START AUTO

2.AUTO CLEAR

5

MIN

3.PRE-PRINT

3

PRINTS

4.BATCH PRINT

BATCH

5.AUTO POWER OFF OFF

6.AUTO LCD OFF

OFF

7.INK CIRCULATION

8.TAPE CLUSTER

OFF

9.DOUBLE FEED DETECTION OFF

7

Press“CURSOR”keys to select “11. END”.

Press (OK) key.
The setting is finished.

"Pressing (SPECIAL FUNCTION) key

set the fine start function also.

NOTE

:

SELECT AN ITEM WITH
AND PRESS

SPECIAL FUNCTION

3.PRE-PRINT 0 PRINTS

4.BATCH PRINT BATCH

5.AUTO POWER OFF

OFF

6.AUTO LCD OFF

OFF

7.INK CIRCULATION

8.TAPE CLUSTER

OFF

9.DOUBLE FEED DETECTION OFF

10.DRUM SIZE A3 DRUM

11.END

8

Select

Set

Select

Set

72

Batch Print Mode [ Special Functions ]

s

Batch Print Mode

This function switches from the normal “Batch Print Mode” to the “Sequential Batch Print Mode".
The default settings is “Batch Print Mode".
The Batch Print Mode prints out all sets input (number of pages x number of groups) as a single document.
The Sequential Batch Print Mode handles each set as a single document.

3

Press“CURSOR” keys to select “4.BATCH
PRINT”.

Each press of

“CURSOR”

keys moves to a different

item and that item is displayed highlighted.

4

Press (OK) key.
The item selected in step

3 is set.

SELECT AN ITEM WITH
AND PRESS

SPECIAL FUNCTION

1.FINE START AUTO

2.AUTO CLEAR

5

MIN

3.PRE-PRINT

3

PRINTS

4.BATCH PRINT BATCH

5.AUTO POWER OFF

OFF

6.AUTO LCD OFF

OFF

7.INK CIRCULATION

8.TAPE CLUSTER

OFF

9.DOUBLE FEED DETECTION OFF

s

How to Set Batch Print Mode

Pressing (CANCEL) key redisplays the main screen.

1

Open the Panel cover.

2

Press (SPECIAL FUNCTION) key.
The “SPECIAL FUNCTION” is displayed on the
LCD panel.

w

q

Select

Set

73

[ Special Function ] dd4. Batch Print Mode

5

Press“CURSOR”keys to select one item.

6

Press (OK) key.
The item selected in step

5 is set.

BATCH PRINT

:

SEQUENTIAL BATCH PRINT

:

CANCEL:

Default
Performs the batch print from document
to document.
Cancels this screen, and redisplays the

previous screen.

Example : when sequential batch print is set

The “BATCH PRINT” setting in the “SPECIAL
FUNCTION Screen" changes to

“

SEQUENTIAL

BATCH PRINT”

Other Functions

4.

SELECT AN ITEM WITH
AND PRESS

BATCH PRINT

BATCH PRINT

SEQUENTIAL BATCH PRINT

CANCEL

SELECT AN ITEM WITH
AND PRESS

SPECIAL FUNCTION

1.FINE START AUTO

2.AUTO CLEAR

5

MIN

3.PRE-PRINT

3

PRINTS

4.BATCH PRINT

SEQ. BATCH

5.AUTO POWER OFF OFF

6.AUTO LCD OFF

OFF

7.INK CIRCULATION

8.TAPE CLUSTER

OFF

9.DOUBLE FEED DETECTION OFF

7

Press“CURSOR”keys to select “11. END”.

Press (OK) key.
The setting is finished.

"Pressing (SPECIAL FUNCTION) key

set the fine start function also.

NOTE

:

SELECT AN ITEM WITH
AND PRESS

SPECIAL FUNCTION

3.PRE-PRINT

SEQ. BATCH

4.BATCH PRINT BATCH

5.AUTO POWER OFF

OFF

6.AUTO LCD OFF

OFF

7.INK CIRCULATION

8.TAPE CLUSTER

OFF

9.DOUBLE FEED DETECTION OFF

10.DRUM SIZE A

3

DRUM

11.END

8

Select

Set

Select

Set

74

Auto Power Off [ Special Functions ]

s

Auto Power Off

This function automatically turn off the machine when the machine is not operated for a specified period
of time. The specified time period can be set for 5 minutes, 10 minutes, 30 minutes, 60 minutes, or
OFF. (The default setting is “OFF

”

.)

3

Press“CURSOR” keys to select “5.AUTO
POWER OFF”.

Each press of

“CURSOR”

keys moves to a different

item and that item is displayed highlighted.

4

Press (OK) key.
The item selected in step

3 is set.

SELECT AN ITEM WITH
AND PRESS

SPECIAL FUNCTION

1.FINE START AUTO

2.AUTO CLEAR

5

MIN

3.PRE-PRINT

3

PRINTS

4.BATCH PRINT

SEQ. BATCH

5.AUTO POWER OFF OFF

6.AUTO LCD OFF

OFF

7.INK CIRCULATION

8.TAPE CLUSTER

OFF

9.DOUBLE FEED DETECTION OFF

s

How to Set Auto Power Off

Pressing (CANCEL) key redisplays the main screen.

1

Open the Panel cover.

2

Press (SPECIAL FUNCTION) key.
The “SPECIAL FUNCTION” is displayed on the
LCD panel.

w

q

Select

Set

75

[ Special Function ] dd5. Auto Power Off

5

Press“CURSOR” keys to select the power off
time.

6

Press (OK) key.
The item selected in step

5 is set.

Example : when 10 minutes is set

The “AUTO POWER OFF” setting in the

“SPECIAL FUNCTION Screen" changes to
“10 MIN”

Other Functions

4.

5 MIN:
10 MIN:
30 MIN:
60 MIN:
OFF:
CANCEL:

Auto Power Off : 5 minutes
Auto Power Off : 10 minutes
Auto Power Off : 30 minutes
Auto Power Off : 60 minutes
Default
Cancels this screen, and redisplays the

previous screen.

SELECT AN ITEM WITH
AND PRESS

AUTO POWER OFF

5 MIN

10 MIN

30 MIN
60 MIN
OFF
CANCEL

SELECT AN ITEM WITH
AND PRESS

SPECIAL FUNCTION

1.FINE START AUTO

2.AUTO CLEAR

5

MIN

3.PRE-PRINT

3

PRINTS

4.BATCH PRINT

SEQ. BATCH

5.AUTO POWER OFF 10

MIN

6.AUTO LCD OFF

OFF

7.INK CIRCULATION

8.TAPE CLUSTER

OFF

9.DOUBLE FEED DETECTION OFF

7

Press“CURSOR”keys to select “11. END”.

Press (OK) key.
The setting is finished.

"Pressing (SPECIAL FUNCTION) key

set the fine start function also.

NOTE

:

SELECT AN ITEM WITH
AND PRESS

SPECIAL FUNCTION

3.PRE-PRINT

SEQ. BATCH

4.BATCH PRINT BATCH

5.AUTO POWER OFF

10 MIN

6.AUTO LCD OFF

OFF

7.INK CIRCULATION

8.TAPE CLUSTER

OFF

9.DOUBLE FEED DETECTION OFF

10.DRUM SIZE A

3

DRUM

11.END

8

Select

Set

Select

Set

76

Auto LCD Off [ Special Functions ]

s

Auto LCD Off

This function automatically turn off the LCD panel when the LCD panel is not operated for a specified
period of time. The specified time period can be set for 5 minutes, 10 minutes, 30 minutes, 60 minutes,
or OFF. (The default setting is “5 minutes

”

.)

3

Press“CURSOR” keys to select “6.AUTO LCD
OFF”.

Each press of

“CURSOR”

keys moves to a different

item and that item is displayed highlighted.

4

Press (OK) key.
The item selected in step

3 is set.

SELECT AN ITEM WITH
AND PRESS

SPECIAL FUNCTION

1.FINE START AUTO

2.AUTO CLEAR

5

MIN

3.PRE-PRINT

3

PRINTS

4.BATCH PRINT

SEQ. BATCH

5.AUTO POWER OFF 10

MIN

6.AUTO LCD OFF

OFF

7.INK CIRCULATION

8.TAPE CLUSTER

OFF

9.DOUBLE FEED DETECTION OFF

s

How to Set Auto LCD Off

Pressing (CANCEL) key redisplays the main screen.

1

Open the Panel cover.

2

Press (SPECIAL FUNCTION) key.
The “SPECIAL FUNCTION” is displayed on the
LCD panel.

w

q

Select

Set

77

[ Special Function ] dd6. Auto LCD Off

5

Press“CURSOR” keys to select the auto LCD
off time.

6

Press (OK) key.
The item selected in step

5 is set.

Example : when 10 minutes is set

The “AUTO LCD OFF" setting in the

“SPECIAL FUNCTION Screen” changes to
“10 MIN”

Other Functions

4.

5 MIN:
10 MIN:
30 MIN:
60 MIN:
OFF:
CANCEL:

Default
Auto LCD Off : 10 minutes
Auto LCD Off : 30 minutes
Auto LCD Off : 60 minutes

Cancels this screen, and redisplays the
previous screen.

SELECT AN ITEM WITH
AND PRESS

AUTO LCD OFF

5 MIN

10 MIN

30 MIN
60 MIN
OFF
CANCEL

SELECT AN ITEM WITH
AND PRESS

SPECIAL FUNCTION

1.FINE START AUTO

2.AUTO CLEAR

5

MIN

3.PRE-PRINT

3

PRINTS

4.BATCH PRINT

SEQ. BATCH

5.AUTO POWER OFF 10

MIN

6.AUTO LCD OFF

10 MIN

7.INK CIRCULATION

8.TAPE CLUSTER

OFF

9.DOUBLE FEED DETECTION OFF

7

Press“CURSOR”keys to select “11. END”.

Press (OK) key.
The setting is finished.

"Pressing (SPECIAL FUNCTION) key

set the fine start function also.

NOTE

:

SELECT AN ITEM WITH
AND PRESS

SPECIAL FUNCTION

3.PRE-PRINT

SEQ. BATCH

4.BATCH PRINT BATCH

5.AUTO POWER OFF

10 MIN

6.AUTO LCD OFF

10 MIN

7.INK CIRCULATION

8.TAPE CLUSTER

OFF

9.DOUBLE FEED DETECTION OFF

10.DRUM SIZE A

3

DRUM

11.END

8

Select

Set

Select

Set

78

Ink Circulation [ Special Functions ]

s

Ink Circulation

This mode enables forced supply of ink when ink discharge is poor or when a new ink tank is installed.

3

Press “CURSOR” keys to select “7.INK
CIRCULATION”.

Each press of

“CURSOR”

keys moves to a different

item and that item is displayed highlighted.

4

Press (OK) key.
The item selected in step

3 is set.

SELECT AN ITEM WITH
AND PRESS

SPECIAL FUNCTION

1.FINE START AUTO

2.AUTO CLEAR

5

MIN

3.PRE-PRINT

3

PRINTS

4.BATCH PRINT

SEQ. BATCH

5.AUTO POWER OFF 10

MIN

6.AUTO LCD OFF

10 MIN

7.INK CIRCULATION

8.TAPE CLUSTER

OFF

9.DOUBLE FEED DETECTION OFF

s

How to Set Ink Circulation

Pressing (CANCEL) key redisplays the main screen.

1

Open the Panel cover.

2

Press (SPECIAL FUNCTION) key.
The “SPECIAL FUNCTION” is displayed on the
LCD panel.

w

q

Select

Set

79

[ Special Function ] dd7. Ink Circulation

5

Press“CURSOR” keys to select “CIRCULATE
INK”.

6

Press (OK) key.
The item selected in step

5 is set.

The ink is circulated.
The“CIRCULATING INK PLEASE WAIT”is
displayed during circulating ink.
“Initial screen” appears when finished.

Other Functions

4.

INK CIRCULATION

CIRCULATE INK

CANCEL

SELECT AN ITEM WITH
AND PRESS

INK CIRCULATION

CIRCULATING INK PLEASE WAIT

SELECT AN ITEM WITH
AND PRESS

CIRCULATE INK

:

CANCEL:

Ink Circulation
Cancels this screen, and redisplays the

previous screen.

Select

Set

80

Tape Cluster Mode

-

Available only with Tape Cluster Unit-[

Special Functions

]

s

Tape Cluster Mode

This item can be set only when the optional tape cluster unit is installed.

" The optional tape cluster unit is required to sort by tape.

IMPORTANT

:

3

Press“CURSOR” keys to select “8.TAPE
CLUSTER”.

Each press of

“CURSOR”

keys moves to a different

item and that item is displayed highlighted.

4

Press (OK) key.
The item selected in step

3 is set.

SELECT AN ITEM WITH
AND PRESS

SPECIAL FUNCTION

1.FINE START AUTO

2.AUTO CLEAR

5

MIN

3.PRE-PRINT

3

PRINTS

4.BATCH PRINT

SEQ. BATCH

5.AUTO POWER OFF 10

MIN

6.AUTO LCD OFF

10 MIN

7.INK CIRCULATION

8.TAPE CLUSTER

OFF

9.DOUBLE FEED DETECTION OFF

s

How to Set Tape Cluster Mode

Pressing (CANCEL) key redisplays the main screen.

1

Open the Panel cover.

2

Press (SPECIAL FUNCTION) key.
The “SPECIAL FUNCTION” is displayed on the
LCD panel.

w

q

Select

Set

81

[ Special Function ] dd8. Tape Cluster Mode

5

Press“CURSOR”keys to select “ON”.

6

Press (OK) key.
The item selected in step

5 is set.

Example : when ON is set

The “TAPE CLUSTER” setting in the

“SPECIAL FUNCTION Screen” changes to
“ON”

Other Functions

4.

TAPE CLUSTER

ON

OFF
CANCEL

SELECT AN ITEM WITH
AND PRESS

SELECT AN ITEM WITH
AND PRESS

SPECIAL FUNCTION

1.FINE START AUTO

2.AUTO CLEAR

5

MIN

3.PRE-PRINT

3

PRINTS

4.BATCH PRINT

SEQ. BATCH

5.AUTO POWER OFF 10

MIN

6.AUTO LCD OFF

10 MIN

7.INK CIRCULATION

8.TAPE CLUSTER

ON

9.DOUBLE FEED DETECTION OFF

7

Press“CURSOR”keys to select “11. END”.

Press (OK) key.
The setting is finished.

"Pressing (SPECIAL FUNCTION) key

set the fine start function also.

NOTE

:

SELECT AN ITEM WITH
AND PRESS

SPECIAL FUNCTION

3.PRE-PRINT

SEQ. BATCH

4.BATCH PRINT BATCH

5.AUTO POWER OFF

10 MIN

6.AUTO LCD OFF

10 MIN

7.INK CIRCULATION

8.TAPE CLUSTER

ON

9.DOUBLE FEED DETECTION OFF

10.DRUM SIZE A

3

DRUM

11.END

8

ON:
OFF:
CANCEL:

When using the tape cluster
Default
Cancels this screen, and redisplays the

previous screen.

Select

Set

Select

Set

82

Double Feed Detection [ Special Functions ]

s

Double Feed Detection

This mode stops printer operation when double feeding of paper is detected.
Check the paper feed state, and resume paper feed by pressing the (PRINT) key.
Double feeding is sometimes detected when the following paper is fed:

"

Colored print paper

"

Paper printed on both sides

"

Reprinted paper

"

Thick stock paper

"

The machine with tape cluster (option) inserts the tape in the part where double feed

was detected if the tape cluster is set to “ON”.

NOTE

:

3

Press“CURSOR” keys to select “9.DOUBLE
FEED DETECTION”.

Each press of

“CURSOR”

keys moves to a different

item and that item is displayed highlighted.

4

Press (OK) key.
The item selected in step

3 is set.

SELECT AN ITEM WITH
AND PRESS

SPECIAL FUNCTION

3.PRE-PRINT

SEQ. BATCH

4.BATCH PRINT BATCH

5.AUTO POWER OFF

10 MIN

6.AUTO LCD OFF

10 MIN

7.INK CIRCULATION

8.TAPE CLUSTER

ON

9.DOUBLE FEED DETECTION OFF

10.DRUM SIZE A

3

DRUM

11.END

s

How to Set Double Feed Detection

Pressing (CANCEL) key redisplays the main screen.

1

Open the Panel cover.

2

Press (SPECIAL FUNCTION) key.
The “SPECIAL FUNCTION” is displayed on the
LCD panel.

w

q

Select

Set

83

[ Special Function ] dd9. Double Feed Detection

5

Press“CURSOR”keys to select “ON”.

6

Press (OK) key.
The item selected in step

5 is set.

Example : when ON is set

The “DOUBLE FEED DETECTION” setting in
the “SPECIAL FUNCTION Screen” changes
to “ON”

Other Functions

4.

DOUBLE FEED DETECTION

ON

OFF
CANCEL

SELECT AN ITEM WITH
AND PRESS

SELECT AN ITEM WITH
AND PRESS

SPECIAL FUNCTION

3.PRE-PRINT

SEQ. BATCH

4.BATCH PRINT BATCH

5.AUTO POWER OFF

10 MIN

6.AUTO LCD OFF

10 MIN

7.INK CIRCULATION

8.TAPE CLUSTER

ON

9.DOUBLE FEED DETECTION ON

10.DRUM SIZE A

3

DRUM

11.END

7

Press“CURSOR”keys to select “11. END”.

Press (OK) key.
The setting is finished.

"Pressing (SPECIAL FUNCTION) key

set the fine start function also.

NOTE

:

SELECT AN ITEM WITH
AND PRESS

SPECIAL FUNCTION

3.PRE-PRINT

SEQ. BATCH

4.BATCH PRINT BATCH

5.AUTO POWER OFF

10 MIN

6.AUTO LCD OFF

10 MIN

7.INK CIRCULATION

8.TAPE CLUSTER

ON

9.DOUBLE FEED DETECTION ON

10.DRUM SIZE A

3

DRUM

11.END

8

ON:
OFF:
CANCEL:

When using the double feed detection
Default
Cancels this screen, and redisplays the

previous screen.

Select

Set

Select

Set

84

Drum Size Mode

-

Available only with A3/A4 Drum-[

Special Functions

]

s

Drum Size Mode

This mode is for setting display when the A4 or A3 drum is installed by mistake.
This allows you to prevent mistakes when frequently replacing the A3 and A4 drums for use.

3

Press“CURSOR”keys to select “

10.

DRUM

SIZE”.

Each press of

“CURSOR”

keys moves to a different

item and that item is displayed highlighted.

4

Press (OK) key.
The item selected in step

3 is set.

SELECT AN ITEM WITH
AND PRESS

SPECIAL FUNCTION

3.PRE-PRINT

SEQ. BATCH

4.BATCH PRINT BATCH

5.AUTO POWER OFF

10 MIN

6.AUTO LCD OFF

10 MIN

7.INK CIRCULATION

8.TAPE CLUSTER

ON

9.DOUBLE FEED DETECTION ON

10.DRUM SIZE A

3

DRUM

11.END

s

How to Set Drum Size Mode

Pressing (CANCEL) key redisplays the main screen.

1

Open the Panel cover.

2

Press (SPECIAL FUNCTION) key.
The “SPECIAL FUNCTION” is displayed on the
LCD panel.

w

q

Select

Set

85

[ Special Function ] dd10. Drum Size Mode

5

Press“CURSOR”keys to select one item.

6

Press (OK) key.
The item selected in step

5 is set.

Example : when A4 DRUM is set

The “DRUM SIZE” setting in the “SPECIAL
FUNCTION Screen” changes to “A4”

Other Functions

4.

DRUM SIZE

A3 DRUM

A4 DRUM
CANCEL

SELECT AN ITEM WITH
AND PRESS

SELECT AN ITEM WITH
AND PRESS

SPECIAL FUNCTION

3.PRE-PRINT

SEQ. BATCH

4.BATCH PRINT BATCH

5.AUTO POWER OFF

10 MIN

6.AUTO LCD OFF

10 MIN

7.INK CIRCULATION

8.TAPE CLUSTER

ON

9.DOUBLE FEED DETECTION ON

10.DRUM SIZE A

4

DRUM

11.END

7

Press“CURSOR”keys to select “11. END”.

Press (OK) key.
The setting is finished.

"Pressing (SPECIAL FUNCTION) key

set the fine start function also.

NOTE

:

SELECT AN ITEM WITH
AND PRESS

SPECIAL FUNCTION

3.PRE-PRINT

SEQ. BATCH

4.BATCH PRINT BATCH

5.AUTO POWER OFF

10 MIN

6.AUTO LCD OFF

10 MIN

7.INK CIRCULATION

8.TAPE CLUSTER

ON

9.DOUBLE FEED DETECTION ON

10.DRUM SIZE A

4

DRUM

11.END

8

A3 DRUM

:

A4 DRUM

:

CANCEL:

Default
When using the A4 drum.
Cancels this screen, and redisplays the

previous screen.

Select

Set

Select

Set

86

User Setting Function

Defaults are as follows:

2

Print speed : Standard

2

Print size [ DP-460e/440e/430e ] : A3

2

Document mode : Text

2

Print size [ DP-340e/330e ] : B4

2

Print darkness : Standard

2

Print size [ DP-330Le ] : LEGAL

2

Plate darkness : Standard

These defaults can be changed to make operation easier for the user. Newly changed values
can also be returned to their defaults.

s

How to Set Initial Setting

Pressing (CANCEL) key redisplays the main screen.

1

Open the Panel cover.

2

Press (USER SETTING) key.
A list of the user setting is displayed on the
LCD panel.

3

Press“CURSOR” keys to select “2.INITIAL
SETTING”. Each press of “CURSOR” keys

moves to a different item and that item is
displayed highlighted.

4

Press (OK) key.
The item selected in step

3 is set.

S

User Setting Function

For details on functions that can be set by the user.

2

“2. INITIAL SETTING”(asee p.86

)

2

“3. OPTIMIZE PRINT”(asee p.88

)

2

“4. DOCUMENT MEMORY”(asee p.89

)

2

“5. DOCUMENT DENSITY DETECTION”(asee p.90

)

2

“6. FEED HEAVY WEIGHT PAPER”(asee p.92

)

2

“7. ONLINE MODE”(asee p.93

)

2

“1. JOB SETTING MEMORY”(asee p.46

)

Initial Setting

SELECT AN ITEM WITH
AND PRESS

USER SETTING

1.JOB SETTING MEMORY

2.INITIAL SETTING

3.OPTIMIZE PRINT

4.DOCUMENT MEMORY

5.DOCUMENT DENSITY DETECTION

6.FEED HEAVY WEIGHT PAPER

7.ONLINE MODE

8.CANCEL

w

q

Select

Set

87

[ User Setting ] dd2. Initial Settind

5

Press“CURSOR”keys to select one item.

6

Press (OK) key.
The item selected in step

5 is set.

Other Functions

4.

2Press“CURSOR” (left/right).

a

Each press of
“CURSOR” keys changes the numerical
value of each item.

2Press“CURSOR”(up/down).

a

Each press of
“CURSOR” keys moves to a different item
and that item is displayed highlighted.

PRINTING SPEED

:

PAPER SIZE

:

IMAGE MODE

:

PLATE DARKNESS

:

PRINT DARKNESS

:

DEFAULTS

:

CANCEL:

Select
Select
Select
Select
Select
Default
Cancels this screen, and redisplays
the previous screen.

SELECT / SET AN ITEM WITH
AND PRESS

INITIAL SETTING

PRINTING SPEED

3

PAPER SIZE A

3
IMAGE MODE TEXT
PLATE DARKNESS 0
PRINT DARKNESS

0

DEFAULTS

SELECT / SET AN ITEM WITH
AND PRESS

INITIAL SETTING

PRINTING SPEED

4

PAPER SIZE A

4
IMAGE MODE TEXT
PLATE DARKNESS

+

1

PRINT DARKNESS +

1

DEFAULTS
CANCEL

q

Select

w

Change

e

Set

88

[ User Setting ] dd3. Optimize Print

This mode is for adjusting the printing temperature and speed to set the best finish for the
printed image.

2

Print temperature : 5 to 35 degree (5 degree pitch)

2

Print speed : 1 to 5

"

Set it to the room temperature.

IMPORTANT

:

s

How to Set Optimize Print Mode

Pressing (CANCEL) key redisplays the main screen.

3

Press“CURSOR” keys to select “

3.

OPTIMIZE

PRINT”. Each press of “CURSOR” keys moves

to a different item and that item is displayed
highlighted.

4

Press (OK) key.
The item selected in step

3 is set.

Optimize Print Mode

5

Press“CURSOR”keys to select one item.

6

Press (OK) key.
The item selected in step

5 is set.

INPUT TEMPERATURE

:

INPUT SPEED

:

CANCEL:

Temperature : 5

-

35y (5y pitch)
Print speed : 1 to 5
Cancels this screen, and redisplays
the previous screen.

SELECT AN ITEM WITH
AND PRESS

USER SETTING

1.JOB SETTING MEMORY

2.INITIAL SETTING

3.OPTIMIZE PRINT

4.DOCUMENT MEMORY

5.DOCUMENT DENSITY DETECTION

6.FEED HEAVY WEIGHT PAPER

7.ONLINE MODE

8.CANCEL

SELECT AN ITEM WITH
AND PRESS

OPTIMIZE PRINT

INPUT TEMPERATURE

35y

INPUT SPEED

5

CANSEL

1

Open the Panel cover.

2

Press (USER SETTING) key.
A list of the user setting is displayed on the
LCD panel.

w

q

2Press“CURSOR” (left/right).

a

changes the

numerical value of each item.

2Press “CURSOR”(up/down).

a

moves to a

different item and that item is displayed highlighted.

Select

Set

q

Select

w

Change

e

Set

89

[ User Setting ] dd4. Document Memory

This mode is for saving scanned documents as they are as images to memory.
Only one type of digital scan image of the document can be saved.

"

“Memory” will be cleared when the power is turned “OFF”.

IMPORTANT

:

s

How to Set Document Memory Mode

Pressing (CANCEL) key redisplays the main screen.

3

Press“CURSOR” keys to select “

4.

DOCUMENT

MEMORY”. Each press of “CURSOR” keys

moves to a different item and that item is
displayed highlighted.

4

Press (OK) key.
The item selected in step

3 is set.

Document Memory Mode

5

Press“CURSOR”keys to select “ON” or “OFF”.

6

Press (OK) key.
The item selected in step

5 is set.

ON:
OFF:
CANCEL:

enables memory functions.
disables memory functions.
Cancels this screen, and redisplays the

previous screen.

Other Functions

4.

SELECT AN ITEM WITH
AND PRESS

USER SETTING

1.JOB SETTING MEMORY

2.INITIAL SETTING

3.OPTIMIZE PRINT

4.DOCUMENT MEMORY

5.DOCUMENT DENSITY DETECTION

6.FEED HEAVY WEIGHT PAPER

7.ONLINE MODE

8.CANCEL

SELECT AN ITEM WITH
AND PRESS

DOCUMENT MEMORY

ON

OFF
CANSEL

1

Open the Panel cover.

2

Press (USER SETTING) key.
A list of the user setting is displayed on the
LCD panel.

w

q

Select

Set

Select

Set

90

[ User Setting ] dd5. Document Density Detection

This feature is for further accuracy in reproducing document image.

2

Before scanning the image for printing, the scanner pre-views the document and detects

the lightest part and the darkest part on the document.

s

How to Set Document Density Detection Mode

Pressing (CANCEL) key redisplays the main screen.

3

Press“CURSOR” keys to select “5.DOCUMENT
DENSITY DETECTION”. Each press of

“CURSOR” keys moves to a different item and
that item is displayed highlighted.

4

Press (OK) key.
The item selected in step

3 is set.

Document Density Detection Mode

SELECT AN ITEM WITH
AND PRESS

USER SETTING

1.JOB SETTING MEMORY

2.INITIAL SETTING

3.OPTIMIZE PRINT

4.DOCUMENT MEMORY

5.DOCUMENT DENSITY DETECTION

6.FEED HEAVY WEIGHT PAPER

7.ONLINE MODE

8.CANCEL

"

This feature is effective with documents which have

photograph / half-tone image, newspaper etc.

"

Pressing Plate-make key during the document

density detection may interfere the process and
cause error in print image.

"

When this feature is ON, DUPRINTER takes a little

longer to make a master than when it is OFF.

IMPORTANT

:

1234567890
abcdefghijkl
mnopqrstuv
wxyz

1

Open the Panel cover.

2

Press (USER SETTING) key.
A list of the user setting is displayed on the
LCD panel.

w

q

Select

Set