Ver. 042013 Effective from S/N 881041304078
DocuCutter CC-228
Ope ration a l Manual
Before operating the machine, read this manual. Follow all safety precautions.
Duplo USA Corporation
3050 S. Daimler St, Santa Ana, CA 92705
www.duplousa.com
Page 2
Declaration of Conformity
PrintFinishing Co. Ltd., located at 625 Sec. II, Wende Road, Hsin-Pu, Hsin-Chu 30500, Taiwan declares that
the product compliances with the provision defined in the regulations as below.
Product Name
Model
Regulation
UL / CSA Low Voltage Directive
2006/95/EC
RoHs Directive 2011/65/EU
Electromagnetic
Compatibility
Directive
2004/108/EC
Standard
DocuCutter
Ultra Cut
CC-228
UC-1`30
UL60950-1, 2nd
Edition,
2007-03-27
CSA 22.2 No
60950-1-07, 2nd
Edition, 2007-03
EN60950-1: 2006/
A11: 2009/A1:2010
EN61000-3-2
EN61000-3-3
EN61000-6-2
EN61000-6-4
IEC61000-4-2
IEC61000-4-3
IEC61000-4-4
IEC61000-4-5
IEC61000-4-6
IEC61000-4-8
IEC61000-4-11
EN60950-1
IEC60950-1
EN50581
CISPR 16-2-3
CISPR 16-2-1
CISPR 16-2-2
Keeper of the CE technical file in the European Community:
Duplo International Ltd.
Hanskampring 6, Automated Precision House, Hamm Moor Lane, Addlestone, Surrey, KT15 2SD UK
Page 3
Table of Contents
Declaration of Conformity. ……………………………………………………………………………………………………………………………………..3
Safety Pecaution ………………………………………………………………………………………………………………………………………………4
Introduction……………………………………………………………………………………………………………………………………………………….……6
Specifications…………………………………………………………………………………………………………………………………………………….…….6
Accessories……………………………………………………………………………………………………………………………………………………………..6
Major Components and Assemblies…………………………………………………………………………………………………………………….….7
Control Panel……………………………………………………………………………………………………………………………………………………………9
Installation……………………………………………………………………………………………………………………………………………………………….10
Setting Up Procedure……………………………………………………………………………………………………………………………………………….11
The Job Selection…………………………………………………………………………………………………………………………………………………....12
Job Layout………………………………………………………………………………………………………………………………………………………………..13
Selecting a Job………………………………………………………………………………………………………………………………………………………….14
Batch Count……………………………………………………………………………………………………………………………………………………………..14
User Define Job………………………………………………………………………………………………………………………………………………………..15
Cut Mark………………………………………………………………………………………………………………………………………………………………….16
Turbo Mode……………………………………………………………………………………………………………………………………………………………..16
Empty the Waste Bin………………………………………………………………………………………………………………………………………………..16
Reset Counter…………………………………………………………………………………………………………………………………………………………..16
Clear Jam………………………………………………………………………………………………………………………………………………………………….16
Error Message and Trouble Shooting Guide……………………………………………………………………………………………………………...17
Page 4
SAFETY PRECAUTIONS
Always observe the cautions and wBatch s given below to prevent personal injury or property
damage.
Disposal of Waste Electrical and Electronics Equipment (WEEE)
This symbol (the symbol of the crossed out wheeled bin) indicates that in European countries this product should
not be disposed of as household waste.
Please recycle where facilities exist by checking with your local authority or supplier for recycle advice.
By ensuring this product is disposed of correctly through proper treatment, recovery and recycling, you will help
prevent potential negative effects on the environment and human health.
En
Entsorgung von alten elektrischen und elektronischen Ausrüstungsteilen
Dieses symbol (das Symbol mit dem durchgekreuzten fahrbaren Müllbehälter) zeigt an, dass dieses Produkt in
europäischen Länden nicht als Haushaltsmüll entsorgt werden, darf, Bitte informieren Sie sich bei lhren örtlichen
Behörden oder bei Ihren Händler hinsichtlich einer Empfehlung fü
r die Entsorgung und führen Sie die betreffenden
Teile dort, wo solche Einrichtungen vorhanden sind, einem Recycling-Prozess zu.
Indem sie sicherstellen, dass das betreffende Produkt durch richtige Behandlung, Rückführung und Recycling
entsorgt wird, tragen Sie dazu bei, möglichen negativen Auswirkungen auf die Umwelt und die menschliche
Gesundheit vorzubeugen.
Ge
Elimination du matériel électronique et électrique usagé
Ce symbole (une poubelle marquée d’une croix) indique que dans les pays européens, ce produit ne doit pas étre
éliminé comme des ordures ménagéres.
Recyclez-le dans les sites adaptés qui vous seront indiqués par les autorités locales ou reseignez-vous auprés de
votre fournisseur.
En veillant à ce que ce produit soit éliminé correctement avec un traitement, une collecte et un recyclage adaptés,
vous contributez à éviter son action nocive potentielle sur I’ environnement et santé humaine.
Fr
Smaltimento di attrezzature elettriche ed elettroniche consummate
Questo simbolo (il simbolo della pattumiera con rotelle barrata) indica che nei paesi europei questo prodotto non
deve essere buttato nei rifiuti domestici.
Per favore smaltire in luogo addetto al riciclo, dove esistente, chiedendo informazioni alle autorità locali o a chi
fornisce consulenza a proposito.
Garantendo uno smaltimento adeguato di questo prodotto (trattamento, recupero e riciclo correto), aiuterete a
prevenire effetti negativi sull’ambiente e sulla salute dell’uomo.
It
Eliminación de residuos de aparatos eléctricos y electrónicos
Este símbolo (un cubo de basura tachado) indica que en los paises europeos este producto no deberá eliminarse
como si se tratara de un residuo doméstico. Solicite asesoramiento sobre reciclaje a las autoridades locales o a su
distribuidor, y siga la normativa en materia de gestión medioambiental y reciclaji de este tipo de residuos.
Si toma las medidas pertinentes para que este producto se elimine mediante un tratamiento, recuperación y
reciclaji adecuados, contribuirá a evitar posibles efectos negativos en el medio ambiente y la salud humana.
SP
Page 5
WEEE information (for Europe)
As a minimum the following substances, preparations and components has to be removed from any
separately collected WEEE (Waste Electrical and Electronics Equipment).
In this parts catalogue, these WEEE symbols are appended to corresponding parts in this parts catalogue.
WEEE Symbol Meaning
ABS
(Poly Acrylonitrile Butadiene Styrene) Plastic Material
LCD
LCD Displays
Cables
Electric Cables
Battery
Batteries
PCBA
PCB’s over 10 square centimeters in size
Bromides
Plastic Containing Bromides
In considering of separate collection, plastics are subdivided into the following categories.
In this parts catalogue, these abbreviations are appended to corresponding parts in the parts catalogue.
Abbreviation Category
ABS
(Poly Acrylonitrile Butadiene Styrene) Plastic Material
NBR
Nitrile Rubber (Acrylonitrile-Butadiene Rubber)
PC
Polycarbonate
POM
Polyoxymethylene
PVC
Polyvinyl Chloride
PU
Polyurethane
EPDM
Synthetic Rubber
Mar
Marprene
Nylon
Nylon 6
IXEF
Fiber Glass
TEF
Teflon
POA
PolyAcetal
Page 6
INTRODUCTION
The Docucutter CC-228 is designed to simplify business card, photo and post card cutting in letter size
which printed by digital press, color laser printer or inkjet image printer in one pass.
SPECIFICATIONS
Paper Size LT / Legal Size/ 9” x 14” (Max)
Paper Weight 120gsm ~ 350gsm
Feeder Capacity
75 sheets (200gsm)
Receiving Tray 500 business cards
Speed Up to 130 business cards per min
Accuracy ± 0.3 mm
Dimension 13.8” (W) x 15.4” (D) x 13” (H)
Net Weight 60 lbs (27Kgs)
Power 115/23D0V Selectable, 50/60Hz, 1.2A
ACCESSORIES
Make sure all accessories provided with the machine.
Power Cord
Advance Control Panel
Sticker
Divider
Stacking Tray
Waste Bin
Operation Manual
Loading...