DuoFern 9494-2, 32501972 Instruction Manual

VBD 662-2 (12.16)

DuoFern Multiple Wall Controller 9494-2

Instruction manual for the electrical connection and for commissioning

Item no. 3250 19 72 / Type: 9494-2 (ﬂush-mounted device for 230 V/ 50 Hz)

Dear Customer,

With your purchase of a DuoFern Multiple Wall Controller, you have chosen a quality product manufactured by RADEMACHER. Thank you for the trust you have placed in us.

RADEMACHER products have been developed with the greatest possible convenience in mind. Having applied uncompromising quality standards and thorough testing, we are proud to be able to present this innovative product to you.

It’s brought to you by all the highlyqualiﬁed personnel here at RADEMACHER.

Contents

i Dear Customer, ...................................................................2

1. This manual... ......................................................................5

1.1 How to use this manual .....................................................................5

2. Hazard symbols ..................................................................6

2.1 Levels of danger and signal words .................................................6

2.2 Symbols and depictions used .......................................................... 7

2.3 Glossary - deﬁnition ............................................................................7

3. Included in delivery ...........................................................8

4. Front view of the operating unit .....................................9

5. Product description ........................................................ 10

5.1 Button functions ................................................................................ 12

5.2 Button combinations ....................................................................... 13

6. Technical speciﬁcations ................................................. 14

6.1 Conduct in the event of a power failure ................................... 16

7. Safety instructions .......................................................... 17

7.1 Intended use ....................................................................................... 18

7.2 Improper use ....................................................................................... 19

7.3 Required expert knowledge of the installer ............................ 19

8. Installation ........................................................................ 20

8.1 Printing the label insert ................................................................... 20

8.2 Selecting the suitable installation location ............................. 22

8.3 Connecting the DuoFern Multiple Wall

Controller 9494-2 ............................................................................... 22

8.4 Safety instructions for the electrical connection .......................23

8.5 Carrying out the Electrical Connection ..................................... 24

8.6 Connection of a lamp and push button .................................... 25

8.7 Connection Diagram with Changeover Switch ...................... 26

8.8 Installation after the electrical connection .............................. 27

Contents

9. Commissioning ................................................................ 28

9.1 Removing the factory default reservation for

buttons 1 and 2 ................................................................................. 29

9.2 Logging on DuoFern Devices ....................................................... 30

9.3 Logging oﬀ DuoFern devices ........................................................ 31

9.4 Logging on to the HomePilot® ..................................................... 32

9.5 Clearing up the DuoFern network .............................................. 34

10. Activating the jog mode ................................................ 35

10.1 Operation in jog mode .................................................................... 36

11. Setting the lighting ......................................................... 37

12. Carrying out a hardware reset, e.g. if a unit fails .......... 38

13. Erase all settings, software reset .................................. 39

14. Dismantling ...................................................................... 40

15. Simpliﬁed EU Declaration of Conformity .................... 41

16. Warranty Terms and Conditions ................................... 42

17. Cut out label insert.......................................................... 43

1. This manual...

...describes the electrical connection, installation, commissioning and operation of your DuoFern Multiple Wall Controller 9494-2.

1.1 How to use this manual

◆ Before you begin, please read this manual through completely and follow all the safety instructions.

◆ Please also read the instruction manuals of the logged on DuoFern devices as well as of the respective connected appliance.

◆ This manual is part of the product. Please store it in an easily accessible place.

◆ When passing the DuoFern Multiple Wall Controller on to a third party, this manual must be passed on as well.

◆ Damage resulting from non-compliance with these instructions and safety instructions will void the warranty. We assume no liability for any consequential damage.

2. Hazard symbols

The following hazard symbols are used in this instruction manual:

Danger of fatal electric shock

Danger area / dangerous situation

2.1 Levels of danger and signal words

DANGER!

This hazard will lead to serious injury or death if not avoided.

WARNING!

This hazard may result in serious injury or death if not avoided.

CAUTION!

This hazard may result in minor or moderate injury if not avoided.

ATTENTION!

This hazard may lead to property damage.

2.2 Symbols and depictions used

Depiction Description

1. Procedures

◆ Itemisation

1) or a) Lists

further useful information

Please read the respective manual.

2.3 Glossary - deﬁnition

DuoFern

◆ RADEMACHER radio technology for controlling compatible products.

HomePilot®

◆ The HomePilot® is a central controller unit for RADEMACHER radio products.

3. Included in delivery

a) 1 x Operating unit (50 x 50 mm) with removable cover panel

for the label insert

b) 1 x Spacer frame c) 1 x Frame d) 1 x Installation housing Not illustrated e) 1 x Label insert, see page 20. f) 1 x Instruction manual

After unpacking please check and compare...

... the contents of the package with those speciﬁed above.

4. Front view of the operating unit

Symbol Description

T1 to T6 Buttons 1 to 6

LED 1 to LED 6 Each button has a red/white LED

LED 1/3/5 LED 2/4/6

5. Product description

Function

The DuoFern Multiple Wall Controller serves to log on and control various DuoFern devices. The six operating buttons can be used to transmit the desired commands to the logged on DuoFern devices. Six two-tone LEDs (red/white) provide information on the respective status of the operation.

Max. number of DuoFern devices

A maximum of 8 DuoFern devices can be logged on per button group. When logging on, the individual DuoFern devices are automatically detected and recognised by the DuoFern Multiple Wall Controller.

Jog mode

To control Venetian blinds with slats, the DuoFern Multiple Wall Controller can be switched to jog mode.

White LEDs used to display the status and for lighting

The white LEDs of the DuoFern Multiple Wall Controller can additionally be used to display the status as well as for lighting. If required, the brightness of the white LEDs can also be adjusted with three diﬀerent settings.

5. Product description

Relay output [ L‘ ] and external control input [ Ext. ]

In addition, the DuoFern Multiple Wall Controller 9494-2 is equipped with

◆ a relay output [ L‘ ] for the connection * of an electrical appliance: e.g. lighting when replacing a light switch.

◆ an external control input [ Ext. ] for the connection * of an additional external switch or button for the electrical appliance.

* electrical connection, see page 25.

Buttons 1 and 2 are, ex works, reserved for the relay

output [ L‘ ] and to control DuoFern Universal actuators.

If required, this factory setting can be removed,

see page 29.

Controller Design Function

Activate or deactivate the light or appliance

1 x tap ON OFF

Control roller shutters / Venetian blinds

1 x tap UP DOWN

tap again STOP STOP

Roller shutters / Venetian blinds in jog mode

1 x tap brieﬂy UP brieﬂy DOWN

1 x long UP DOWN

tap again STOP STOP

Dim light or save interim values

1 x tap 0 to 100 % 100 % to 0

2 x tap

go directly to

100 %

go directly to 0

1 x tap in opposite

direction

e.g. save 75 % e.g. save 45 %

Press and hold 0 to 100 % 100 % to 0

release e.g. save 75 % e.g. save 45 %

5.1 Button functions

T3 T4

T5 T6

0 %

100 %

5.2 Button combinations

Activate the registering mode, see page 30.

Activate the log-oﬀ mode, see page 31.

Clear the DuoFern network, see page 34.

Activate the jog mode, see page 35.

Set lighting, see page 37.

1 sec.

5 sec. 1 sec.

Software reset, see page 39.

5 sec.

6. Technical speciﬁcations

Mains supply [ L / N ]

Mains supply voltage: 230 V / 50 Hz

Consumption: Standby: < 0.6 W

Connection [ L‘ and L / N ]

Switching voltage: 230 V / 50 Hz

Maximum switching capacity:

ohmic load, e.g. bulbs

12 A (µ) (Type 1B)

inductive loads such as: ﬂuorescent lamps, drives, iron core transformers, e.g. for extra-low voltage bulbs such as halogen bulbs

6 A (µ) (Type 1B)

capacitive loads such as: electronic transformers, AC/DC transformer, e.g. for extra-low voltage lamps such as halogen lamps, LEDs, etc.

6 A (µ) (Type 1B)

+ 30 hidden pages

DuoFern 9494-2, 32501972 Instruction Manual

Specifications and Main Features

Frequently Asked Questions

User Manual