Dunlop Manufacturing ZW90 User Manual

92503010541 REVA

ZW90 WYLDE PHASE

ZW90 WYLDE PHASE

DESCRIPTION

• Add shimmery velocity to lead
licks, or add swoosh to chords

• Works well with bass, keyboards
and even vocals

• Heard on Zakk’s legendary
blazing leads and solos

• Limited 2011 run

CONTROLS

SPEED knob varies rate of

phase sweep

FOOTSWITCH toggles effect

on/bypass

POWER

The MXR Wylde Phase can be
powered by one 9-volt battery
(accessed by removing the bottom
plate of the pedal), a Dunlop
ECB003 AC adapter (ECB003E in
Europe), or a Dunlop DCB10 DC
Brick power supply.

DIRECTIONS

• Run a cable from your guitar
to the Wylde Phase’s Input jack
and run another cable from the
Wylde Phase’s Output jack to
your amplier.

• Set the Wylde Phase’s
Speed control knob to
the 12 o’clock position.

• Turn the effect on by depressing
the footswitch.

• Rotating the Speed knob in a
clockwise motion results in a

faster phase effect, while rotating

the knob counterclockwise results
in a slower phase effect.

SPECIFICATIONS

Input Impedance 1 MΩ
Output Impedance 10 kΩ

Nominal Input -20 dBV
Signal to Noise > 96 dBA

Bypass Hardwire

Current Draw 5 mA
Power Supply DC 9 Volts

SAMPLE SETTINGS

ZAKK’S OUTTA SPACEA-MUSEING

DUNLOP MANUFACTURING, INC.

P.O. BOX 846 BENICIA, CA 94510 U.S.A.

TEL: [phone] FAX: [phone]