Dunlop Manufacturing ZW38 User Manual

92503010547 REVA

ZW38 BLACK LABEL CHORUS

ZW38 BLACK LABEL CHORUS

DESCRIPTION

• Analog bucket brigade
technology

• Small footprint saves pedalboard

space

• High and Low lter cut controls

for detailed tone sculpting

• Two outputs for a wide and

sweeping stereo spread

CONTROLS

LOW Controls the amount of

low frequency cut of effect

HIGH Controls the amount of

high frequency cut of effect

LEVEL Controls the overall

volume of the effect

RATE Controls the speed of the

chorus effect

DEPTH Controls overall intensity

of the chorus effect

THRU OUTPUT JACK Engages

stereo mode

POWER

The MXR ZW38 Black Label Chorus
can be powered by one 9 volt
battery (accesed by removing
the bottom plate of the pedal),

a Dunlop ECB003 AC adapter

(ECB003E in Europe) or a Dunlop
DCB10 DC Brick power supply.

DIRECTIONS

• Run a cable from your guitar to
the Black Label Chorus’ Input
jack and run another cable from
the Black Label Chorus’ Mono
Output jack to your amplier
(for mono operation). To use the
Black Label Chorus in stereo
mode, run an additional cable
from the Thru Output jack to the
input of a second amp. Using
this jack automatically sends the

delayed signal only to the Mono

output jack when the effect is on
and outputs a buffered copy of
the input signal.

• Start off with all of the controls
set to 12 o’clock.

SAMPLE SETTINGS

ZAKK’S FAT SOLOPOWER BALLAD

• Turn the effect on by depressing
the footswitch. The illuminated
blue LED indicates the unit is on.

• Rotate the Depth control
clockwise to increase the
intensity of the effect.

• Rotate the Rate control clockwise

to increase the speed of the

chorus effect.

• Adjust the Level control to set the
overall volume of the effect.

• Adjust the Low and High controls

to set desired tonality of the

chorus effect.

SPECIFICATIONS

Input Impedance 1 MΩ
Output Impedance 1 kΩ

Signal to Noise

Level, Rate, Depth Controls @ Max CW
Tone Controls @ Center Position
Effect On > 96 dBV
Bypass > 106 dBV

Tone Controls (Effects On)
LOW Variable Shelf 12dB/Octave

CW 800 Hz
Center 350 kHz
CCW 70 Hz
HIGH Variable Shelf 6dB/Octave
CW Flat

Center 1.2 kHz
CCW 660 Hz

Bypass Buffered

Current Draw 13 mA

Power Supply DC 9 Volts

DUNLOP MANUFACTURING, INC.

P.O. BOX 846 BENICIA, CA 94510 U.S.A.

TEL: [phone] FAX: [phone]