Dunlop Manufacturing M173 User Manual

92503006727revD

M173 CLASSIC 108 FUZZ

M173 CLASSIC 108 FUZZ

DESCRIPTION

• BC108 Fuzz Face
a pedal-board friendly chassis

• Original Fuzz Face hammer­tone turquoise nish

• True bypass

®

circuitry in

CONTROLS

VOLUME knob controls

overall effect volume

FUZZ knob controls

amount of fuzz

BUFFER switch removes

high-end roll off and oscillation
caused by some wah wahs

FOOTSWITCH toggles

effect on/bypass
(blue LED indicates on)

POWER

The MXR Classic 108 Fuzz is
powered by one 9-volt battery
(remove bottom plate to install),
a 9-volt AC Adapter such as the
Dunlop ECB003/ECB003EU or
a power supply such as the DC

™

.

Brick

DIRECTIONS

• Run a cable from your guitar to
the Classic 108 Fuzz’s INPUT
jack and run another cable from
its OUTPUT jack to your amplier.

• Start with all controls at

12 o’clock.

• Turn the effect on by depressing
the footswitch.

• Rotate the FUZZ knob clockwise
to increase amount of fuzz or
counterclockwise to decrease it.

• Rotate the VOLUME knob
clockwise to increase
overall effect volume or
counterclockwise to decrease it.

• Engage the BUFFER switch to
eliminate the oscillation that
sometimes occurs when a wah
wah is in front of the Classic
108 Fuzz. You may notice a
brightening of the fuzz tone.

SAMPLE SETTINGS

BROWN ACID KINGS OF THE

BLACK IRON

DESERT

SPECIFICATIONS

Input Impedance
Buffer ON 800 kΩ
Buffer OFF 10 kΩ
Output Impedance at 1 kHz
Max Volume 16 kΩ

-6 db Volume 160 kΩ

Max Output Level -4 dBV
Max Gain at 1 kHz 55 dB

Bypass True Hardwire

Current Draw 2.2 mA
Power Requirement 9 volts DC

DUNLOP MANUFACTURING, INC.

P.O. BOX 846 BENICIA, CA 94510 U.S.A.

TEL: [phone] FAX: [phone]