Dunlop Manufacturing M115 User Manual

92503005351revC

M115 DISTORTION III

M115 DISTORTION III

DESCRIPTION

• Dynamic, touch-sensitive

response

• Proprietary circuit design

delivers rich harmonics

• Large output range

• True bypass

CONTROLS

OUTPUT knob controls overall

effect volume

TONE knob controls the color

of the overdrive signal

DISTORTION knob controls

amount of distortion

FOOTSWITCH toggles

effect on/bypass (red LED

indicates on)

POWER

The MXR Distortion III is powered
by one 9-volt battery (remove
bottom plate to install),

a 9-volt
AC adapter such as the Dunlop
ECB003/ECB003E, or a DC Brick
power supply.

DIRECTIONS

• Run a cable from your guitar
to the Distortion III’s INPUT jack
and run another cable from the

™

Distortion III’s OUTPUT jack to
your amplier.

• Start with all controls

at 12 o’clock.

• Turn the effect on by depressing
the footswitch.

• Rotate the TONE knob
clockwise for a brighter

sound or counterclockwise

for a darker sound.

• Rotate the OUTPUT knob

clockwise to increase

overall effect volume or

counterclockwise to
decrease it.

• Rotate the DISTORTION knob

clockwise to increase amount

of distortion or counterclockwise

to decrease it.

SPECIFICATIONS

Input Impedance 1 MΩ
Output Impedance* 5.5 kΩ

Nominal Intput Level -22 dBV
Maximum Output Level +3 dBV

Noise Floor** 84 dBV

Tone Control ±6.5 dB at 3 kHz

Distortion Gain 22 dB to 50 dB, 1 kHz

Bypass True Hardwire

Current Draw 3.5 mA

Power Supply 9 Volts DC

*

Output control at mid position
A-weighted, Distortion and Tone controls

**

at mid position Output control at maximum

clockwise position

SAMPLE SETTINGS

SMOOTH OVERDRIVE SINGING SUSTAINCRUNCHY RHYTHM

DUNLOP MANUFACTURING, INC.

P.O. BOX 846 BENICIA, CA 94510 U.S.A.

TEL: [phone] FAX: [phone]