Dunlop Manufacturing M107 User Manual

92503016101revB

M107 PHASE 100

M107 PHASE 100

DESCRIPTION

• Big brother of the Phase 90 with
a broader range of sounds

• Four-position rotary switch
selects four preset waveforms

• Spacey, psychedelic ambience
for guitar solos or chords

CONTROLS

INTENSITY knob selects one of

four preset phase waveforms

SPEED knob controls speed

of phase effect

FOOTSWITCH toggles

effect on/bypass (red LED
indicates on)

POWER

The MXR Phase 100 is powered
by one 9-volt battery (remove
bottom plate to install), a 9-volt
AC adapter such as the Dunlop
ECB003/ECB003E, or a DC Brick
power supply.

DIRECTIONS

• Run a cable from your guitar
to the Phase 100’s INPUT jack
and run another cable from the

™

Phase 100’s OUTPUT jack to
your amplier.

• Start with all controls

• Rotate the SPEED knob
clockwise for a faster phase
effect or counterclockwise
for a slower phase effect.

• Use the INTENSITY knob to
select your desired waveform.

at 12 o’clock.

• Turn the effect on by depressing
the footswitch.

SPECIFICATIONS

Input Impedance 500 kΩ
Output Impedance 3 kΩ

Maximum Intput Level +5 dB
Maximum Output Level +8 dB

Noise Floor* 95 dBV
Phase Shift Range 180 Degrees

Bypass Hardwire

Current Draw 6 mA
Power Supply 9 volts DC

*A-weighted

SAMPLE SETTINGS

SLOW AND DEEP MEDIUM SUBTLESPINNING SPEAKER

DUNLOP MANUFACTURING, INC.

P.O. BOX 846 BENICIA, CA 94510 U.S.A.

TEL: [phone] FAX: [phone]