Dunlop Manufacturing FFM2 User Manual

92503014462 REVA

®

FFM2 MINI

FFM2 MINI FUZZ FACE

DESCRIPTION

• Legendary Fuzz Face tone with
pedalboard-friendly size, AC
power and on/bypass status LED

• Based on ’66-’68 era pre-silicon
Fuzz Faces

• Warm vintage fuzz tones
provided by slightly mismatched
germanium transistors

• True Bypass

CONTROLS

VOLUME knob controls overall

effect volume

FUZZ knob controls amount

of fuzz

FOOTSWITCH toggles on/

bypass (Blue LED indicates on)

POWER

The FFM2 Fuzz Face is powered
by one 9 volt battery (open
battery door on underside of

pedal to install), a 9 volt AC
Adapter such as the Dunlop
ECB003/ECB003EU or a power
supply such as the DC Brick™.

DIRECTIONS

• Run a cable from your guitar
to the Fuzz Face’s Input jack
and another cable from the
Face Face’s Output jack to
your amplier.

• Start with both controls at 12
o’clock.

• Turn the effect on by depressing
the footswitch.

• Rotate the VOLUME knob

clockwise to increase
overall effect volume or
counterclockwise to decrease it.

• Rotate the FUZZ knob clockwise
to increase amount of fuzz or

counterclockwise to decrease it.

®

SPECIFICATIONS

Input Impedance 10 kΩ

Output Impedance

Max Volume 2 kΩ

-6 dB Volume 115 kΩ

Max Gain 45 dB

Bypass True Hardwire
Current Draw 3.4 mA
Power Supply 9 volts DC

DUNLOP MANUFACTURING, INC.

P.O. BOX 846 BENICIA, CA 94510 U.S.A.

TEL: [phone] FAX: [phone]