Dunlop Manufacturing DD11 User Manual

92503004154revD

DD11 DIME DISTORTION

DD11 DIME DISTORTION

DESCRIPTION

• Thick, powerful distortion with
superior denition

• Proprietary SCOOP switch
notches mids for the heavily
scooped Dime sound

• 3-band EQ provides huge
tonal exibility

CONTROLS

1 SCOOP switch cuts midrange

at 1kHz by -22dB (indicated by
yellow LED)

2 OUTPUT knob controls

overall effect volume

3 BASS knob cuts or boosts

low frequencies

4 MID knob cuts or boosts

midrange frequencies

5 TREB knob cuts or boosts

high frequencies

6 GAIN knob controls amount

of distortion

7 FOOTSWITCH toggles effect on/

bypass (red LED indicates on)

POWER

The MXR Dime Distortion is
powered by two 9-volt batteries
(accessed via bottom of pedal),
an 18-volt AC adapter such as
the Dunlop ECB004/ECB004E
(included), or a DC Brick
supply.

7

™

power

DIRECTIONS

• Run a cable from your bass to
the Dime Distortion’s Input jack
and run another cable from the
Dime Distortion’s Output jack to
your amplier.

• Start with all controls at
12 o’clock.

• Turn the effect on by depressing
the footswitch.

• Push the SCOOP switch to cut
midrange at 1kHZ by -22dB for
a scooped metal sound.

• Rotate the OUTPUT clockwise
to increase volume or
counterclockwise to decrease it.

SAMPLE SETTINGS

DIMED

RUTHIES INN

• Rotate the DISTORTION knob
clockwise to increase amount
of distortion or counterclockwise
to decrease it.

• Rotate the BASS knob clockwise
to boost low frequencies or
counterclockwise to cut them.

• Rotate the MID knob clockwise
to boost midrange frequencies or
counterclockwise to cut them.

• Rotate the TREB knob clockwise
to boost high frequencies or
counterclockwise to cut them.

• Rotate the DISTORTION knob
clockwise to increase amount of
distortion or counterclockwise
to decrease it.

CUTTING EDGE

SPECIFICATIONS

Input Impedance 1 MΩ
Output Impedance 3 kΩ

Noise Floor* -89 dBV

Bypass Hardwired

Current Draw 14 mA
Power Supply 18 volts DC

All controls at mid-position, A-weighted.

*

DUNLOP MANUFACTURING, INC.

P.O. BOX 846 BENICIA, CA 94510 U.S.A.

TEL: [phone] FAX: [phone]