Dunlop Manufacturing DCR1FC User Manual

CRYBABY

DCR-1FC RACK FOOT CONTROLLER

DESCRIPTION

• The companion foot pedal for the DCR-1SR Crybaby Rack Module

• Pedal position modulates the wah effect selected at the rack

• Use four pedals on the same channel, accessed from anywhere!

POWER

Single 9 volt alkaline battery powers LED’s ONLY. Pedal continues to operate with absent
or dead battery

CONTROLS

• Pedal sweeps the wah effect, which has been pre-assigned at the rack module

• Effect On/Bypass switch at toe-down position of pedal travel

• Tandem LED’s indicate Pedal Selected and Effect Active (simultaneously)