Dunlop UV-1FC User Manual

UNI-VIBE®

UV-1FC FOOT CONTROL PEDAL

DESCRIPTION

• Transfer the Uni-Vibe Speed and Bypass functions to foot control

• Delicate, real-time modulation of either Chorus or Vibrato effects

• Premium connectors and 10 million cycle industrial microswitch!

DIRECTIONS

To set up the Uni-Vibe® UV-1FC Foot Control Pedal, simply use a guitar cord to plug the pedal
into your Uni-Vibe’s Pedal jack, located at the front of the unit. Once the UV-1FC is plugged
in, you can ignore the settings of the Speed knob and the Effect/Bypass switch, as these
functions are now transferred to the foot pedal.

Press the pedal down (toe down) to increase the speed, or rock it back (heel down) to
decrease the speed. Rocking the pedal all the way back (heel all the way down) sets the Uni­Vibe to bypass (no effect). Experiment with the effect, and you’ll see how it can be especially
effective when the effect’s tempo is placed ahead of or behind the beat of the song.

POWER

Needs no batteries nor external power source

CONTROLS

¨• Pedal position all the way up (heel down) sets the Uni-Vibe to bypass mode (no effect)

• Pressing the pedal down (toe down) modulates the Speed function of the Uni-Vibe, with
speed increasing as the pedal is pressed lower