Dunlop MXR ZW-44 BERZERKER Overdrive Data Sheet

92503010544revB

ZW44 BERZERKER OVERDRIVE

ZW44 BERZERKER OVERDRIVE

DESCRIPTION

• Powerful, cutting overdrive with
great denition

• Output and Gain controls for any
tone at any volume

• Single Tone control makes sound
shaping simple

CONTROLS

OUTPUT knob controls overall

effect volume

TONE knob shapes overall EQ

GAIN knob controls amount

of distortion

FOOTSWITCH toggles effect on/

bypass (red LED indicates on)

POWER

The MXR Berzerker Overdrive
is powered by one 9-volt battery
(remove bottom plate to install),
a 9-volt AC adapter such as
the Dunlop ECB003/ECB003E
or a DC Brick™ power supply.

DIRECTIONS

• Run a cable from your guitar
to the Berzerker Overdrive’s

INPUT jack and run another cable
from the Berzerker Overdrive’s
OUTPUT jack to your amplier.

• Start with all controls at
12 o’clock.

• Turn the effect on by depressing
the footswitch.

SAMPLE SETTINGS

ZAKKS SETTING

* PRE AMP SETTING AT 10

• Rotate OUTPUT control clock­wise to increase overall effect
volume or counterclockwise to
decrease it.

• Rotate TONE knob clockwise for
a brighter tone or counterclock­wise for a warmer tone.

• Rotate GAIN knob clockwise to
increase amount of distortion or
counterclockwise to decrease it.

YOUR SETTINGMORE OVERDRIVE

SPECIFICATIONS

Input Impedance 1 MΩ
Output Impedance 7.5 kΩ

Nominal Input -22 dBV

Noise Floor* -88 dBV

Bypass Hardwire
Current Draw 2.2 mA
Power Supply 9 volts DC

*A-weighted

DUNLOP MANUFACTURING, INC.

P.O. BOX 846 BENICIA, CA 94510 U.S.A.

TEL: [phone] FAX: [phone]