Dunlop MXR M291 Dyna Comp Mini Data Sheet
92503020775REVA
M291 DYNA COMP® MINI COMPRESSOR
M291 DYNA COMP® MINI COMPRESSOR
The Dyna Comp Mini Compressor combines the
best of classic tone and modern convenience in a
housing that’s nearly half the size of the original.
Thanks to its rare CA3080 “metal can” integrated
circuit (IC), this pedal yields quieter operation,
greater transparency, and increased dynamic
range. An all-new Attack switch toggles between
slow and fast attack times.
CONTROLS
1 ATTACK switch toggles
between slow and fast attack
times (red LED )
2 OUTPUT knob sets overall
effect volume
3 SENSITIVITY knob sets amount
of compression
4 FOOTSWITCH toggles
effect on/bypass (blue LED
indicates on)
1
2
3
ATTAC K
OUTPUT
SENSITIVITY
4
DIRECTIONS
• Run a cable from your guitar to
the M291’s INPUT jack and run
another cable from the M291’s
OUTPUT jack to your amplifier.
• Set OUTPUT and SENSITIVITY
controls to their 12 o’clock
positions.
• Turn the effect on by
depressing the footswitch.
• Push ATTACK switch to toggle
between default slow attack time
and fast attack time, indicated
by red LED.
• Rotate OUTPUT knob clockwise
to increase effect volume or
counterclockwise to decrease it.
• Rotate SENSITIVITY knob
clockwise to increase
amount of compression or
counterclockwise to decrease it.
POWER
The Dyna Comp Mini Compressor
is powered by the included Dunlop
ECB003 9-volt adapter or the
DC Brick™ and Iso-Brick™
power supplies.
SPECIFICATIONS
Input Impedance 800 kΩ
Output Impedance 15 kΩ
Max Inp ut Level -5 dBV
Max Output Level -12 d BV
Max Compression 36 dB
THD* 0.2 %
Noise Floor** -95 dBV
Current Draw 4 mA
Power Supply 9VDC
*Measure ment made at -20 dBV, 1 kHz
**A-weighted.
DUNLOP MANUFACTURING, INC.
P.O. BOX 846 BEN ICIA , CA 94510 U. S.A .
TEL : 1-707- 745 -272 2 FA X: 1-70 7-745-2 658
Loading...