Dunlop MXR M-132 Super Comp Data Sheet

92503001858 revD

M132 SUPER COMP

M132 SUPER COMP

DESCRIPTION

• Classic Dyna Comp® style
compression

• Attack Level control preserves
attack volume without
sacricing sustain

• Compatible with the
hottest pickups

CONTROLS

OUTPUT knob controls

overall eect volume

ATTACK LEVEL knob sets

attack attenuation level

SENSITIVITY knob sets overall

amount of compression

FOOTSWITCH toggles

eect on/bypass (red LED
indicates on)

POWER

The MXR Super Comp is
powered by one 9-volt battery
(remove bottom plate to install),

a 9-volt AC adapter such as the
Dunlop ECB003/ECB003E, or a
DC Brick™ power supply.

DIRECTIONS

• Run a cable from your guitar
to the Super Comp’s INPUT
jack and another cable from
the Super Comp’s OUTPUT
jack to your amplier.

• Start with all controls at
12 o’clock.

• Turn the eect on by depressing
the footswitch.

• Rotate the OUTPUT knob
clockwise to increase
overall eect volume or
counterclockwise to decrease it.

SAMPLE SETTINGS

LIGHT COMP DIMED TWEEDHEAVY SQUISH

• Rotate the ATTACK LEVEL knob
clockwise to reduce volume
attenuation of note upon attack
or counterclockwise to increase
it. For the classic Dyna Comp
sound, rotate this control fully
counterclockwise.

• Rotate the SENSITIVITY knob
clockwise to increase amount of
compression or counterclockwise
to decrease it.

SPECIFICATIONS

Input Impedance 1 MΩ
Output Impedance 10 kΩ

Nominal Input Level -5 dBV
Nominal Output Level -12 dBV

Noise Floor* -95 dBV

T.H.D 0.2% Typ. at -20 dBV, 1 kHz

Maximum Compression 36 dB

Attack Time 5 ms

Release Time 1 s

Bypass True Hardwire

Current Draw 3.3 mA

Power Supply 9 volts DC

*A-weighted

DUNLOP MANUFACTURING, INC.

P.O. BOX 846 BENICIA, CA 94510 U.S.A.

TEL: [phone] FAX: [phone]