Dunlop MXR CSP-202 Custom Comp Data Sheet

92503009463revC

CSP202 CUSTOM COMP

CSP202 CUSTOM COMP

DESCRIPTION

• Features the rare CA3080 “metal
can” IC for optimal performance

• Contains RF suppression
components for interference-free
operation

• Internal ATTACK and TRIM
controls for ne-tuning

• True bypass

CONTROLS

OUTPUT knob controls the

eect volume level

SENSITIVITY knob sets

compression ratio

FOOTSWITCH toggles eect on/

bypass (blue LED indicates on)

ATTACK knob (internal) controls

compressor reaction speed

TRIM knob (internal) adjusts

frequency response of compressor

POWER

The MXR Custom Comp is
powered by one 9-volt battery
(remove bottom plate to install),
a 9-volt AC adapter such as the
Dunlop ECB003/ECB003E, or a

™

DC Brick

power supply.

INTERNAL
SETTINGS

DIRECTIONS

• Run a cable from your instrument
to the Custom Comp’s INPUT
jack and run another cable from
the Custom Comp’s OUTPUT
jack to your amplier.

• Begin with all controls set at the
12 o’clock position.

• Turn on the eect by depressing
the footswitch.

• Rotate the SENSITIVITY
knob clockwise to increase
compression intensity or
counterclockwise to decrease it.

• Rotate the OUTPUT knob
clockwise to increase eect
volume or counterclockwise
to decrease it.

SAMPLE SETTINGS

CHICKEN PICKIN’

NASHVILLE SESSION

INTERNAL

SETTINGS

NEW WAVE REGGAE

STACCATO POP

INTERNAL
SETTINGS

INTERNAL CONTROLS

• For further ne-tuning, remove
the bottom plate to access the
internal Attack and Trim controls.

• Rotate the ATTACK knob
counterclockwise to hear more
attack from notes and chords
played in close succession or
clockwise to suppress them.

• Rotate the TRIM knob
counterclockwise to add
high end detail or clockwise
for a atter frequency response.

CHIME BLOOM

SLOW RELEASE

INTERNAL

SETTINGS

SPECIFICATIONS

Input Impedance 1 MΩ
Output Impedance 10 kΩ

Maximum Input Level -5 dBV
Maximum Output Level -12 dBV

Noise Floor -95 dBV

T.H.D. 0.2% typical,

-20 dBV at 1 kHz

Max Compression 36 dB

Attack Time 5 ms
Attack Recovery Time* 1 s to 50 ms

Bypass True Bypass

Current Draw 3.3 mA

Power Supply 9 volts DC

Internally adjustable.

*

DUNLOP MANUFACTURING, INC.

P.O. BOX 846 BENICIA, CA 94510 U.S.A.

TEL: [phone] FAX: [phone]