Dunlop MXR CSP035 Shin-Juku Drive Data Sheet

92503020469REVA

CSP035 SHIN-JUKU™ DRIVE

CSP035 SHIN-JUKU™ DRIVE

The Shin-Juku Drive delivers the tones of a
legendarily elusive boutique amp, featuring
dynamic response to your attack and tons of
headroom. It’s got a wide range of grit, so you
can take it from a smooth and organic boost to
full on grinding overdrive. Push the Dark switch
for a thicker, warmer sound.

CONTROLS

1 TONE knob shapes EQ

of effect

2 DARK switch thickens overdrive

character (indicated by red LED)

3 OUTPUT knob sets overall

effect volume

4 GAIN knob sets amount

of overdrive

5 FOOTSWITCH toggles effect

on/bypass (blue LED
indicates on)

1

2

3

4

5

DIRECTIONS

• Run a cable from your guitar to
the CSP035’s INPUT jack and run
another cable from the CSP035’s
OUTPUT jack to your amplifier.

• Set all controls to their 12 o’clock
position.

• Turn the effect on by
depressing the footswitch.

• Rotate the DRIVE knob
clockwise to increase the amount
of overdrive or counterclockwise
to decrease it.

• Rotate the VOLUME knob
clockwise to increase
overall ef fect volume or
counterclockwise to decrease it.

• Rotate the TONE knob
clockwise for a brighter
sound or counterclockwise
for a warmer sound.

• Engage the DARK switch to give
your overdrive sound a darker
character (indicated by red LED) .

POWER

The Shin-Juku Drive is powered
by one 9-volt batter y (remove
bottom plate to install), a 9-volt
AC adapter such as the Dunlop
ECB003, or the DC Brick™ and
Iso-Brick™ power supplies.

SPECIFICATIONS

Input Impedance ~ 10Kohm

Output Impedance* ~ 5K ohms

Noise Floor** -101. 5 dBV

Power Supply <10 mA @

*With da rk switch of f
**All contr ols at mid position

@ 1 KHz

@ 1 KHz

9VDC

DUNLOP MANUFACTURING, INC.

P.O. BOX 846 BEN ICIA, C A 94510 U.S .A.

TEL : [phone] FAX: [phone]