Dunlop JHM9 User manual

CRY BABY M I N I WA H

92503021112REVA

JHM9 JIMI HENDRIX™ CRY BABY

POWER

The Jimi Hendrix™ Cry Baby Mini Wah is
powered by one 9-volt battery (accessed
via the bottom of the pedal), an AC adapter
such as the Dunlop ECB003, or the DC

™

Brick

and Iso-Brick™ power supplies.

SETUP INSTRUCTIONS

• Run a shielded instrument cable from

your guitar to the JHM9’s INSTRUMENT
jack. Run another shielded instrument
cable from the JHM9’s AMPLIFIER jack
into your amplifier input.

• Turn on the amplifier and begin playing.

• To turn the pedal on/off, push the toe of
the pedal down until you feel a “click.”

• Rock your foot back and forth on the
pedal to instantaneously change the
effect that the Cry Baby Wah has on the
tone of your instrument.

• Located under the rocker at the heel of
the pedal is an adjustable torque clutch.
Turn clockwise to increase resistance or
counterclockwise to decrease resistance
(Wrench included). See Diagram A.

DIAGRAM A

®

MINI WAH

SPECIFICATIONS

Impedance

Input 800 kΩ
Output 10 kΩ

Resonant Frequency

Heel Down 248Hz - 310Hz
Toe Down 1250Hz - 1600Hz

Maximum Level

Input -8.0 dBV
Output +10 dBV

Maximum Gain

Heel Down +16.5 dB
Toe Down +16.0 dB

Current Draw 900 µA