Dunlop JHF3 BAND OF GYPSYS FUZZ FACE User Manual

92503017849REVA

DUNLOP MANUFACTURING, INC.

P.O. BOX 846 BENICIA, CA 94510 U.S.A.

TEL: [phone] FAX: [phone]

SPECIFICATIONS

Input Impedance 320 kΩ

Output Impedance

Max Volume 11 kΩ
Mid Volume 64 kΩ

Max Output +9 dBV

Max Gain 60 dB
Noise Floor* -72 dBV

Eect Switching THWBY
Current Draw 3.8 mA
Power Supply 9V Battery

DESCRIPTION

• The biting, aggressive fuzz tone
used by Jimi Hendrix for the Band
of Gypsys show and other iconic
performances

• True bypass

CONTROLS

VOLUME knob controls overall

eect volume

FUZZ knob controls amount

of fuzz

FOOTSWITCH toggles on/

bypass

DIRECTIONS

• Run a cable from your guitar
to the JHF3’s INPUT jack and
another cable from the JHF3’s
OUTPUT jack to your amplier.

• Start with both controls at 12
o’clock.

• Turn the eect on by depressing
the footswitch.

• Rotate the VOLUME knob
clockwise to increase
overall eect volume or
counterclockwise to decrease it.

• Rotate the FUZZ knob clockwise
to increase amount of fuzz or
counterclockwise to decrease it.

JHF3 BAND OF GYPSYS™
FUZZ FACE® DISTORTION

POWER

The JHF3 is powered by one 9-volt
battery (remove bottom plate to
install).

Measurements made at 1 kHz, all controls max.
*A-weighted.