Dunlop JH1 User manual

JIMI HENDRIX

JH-1 WAH WAH

DESCRIPTION

• The original 60’s wah wah, with Jimi’s custom modications!

• Lowers the effect’s frequency range for fatter, more open sound

• Heavy-duty die cast construction and premium electronics

DIRECTIONS

To set up the Jimi Hendrix JH-1 Wah Wah, plug your instrument and amplier cords into the
proper jacks. (The words “Instrument” and “Amplier” are on the rubber footpad.)

Press the pedal all the way down to toggle the Effect On footswitch. Then you can control the
wah effect with the pedal travel. To turn it off, press the pedal all the way down again.

If you rock the pedal all the way up and down, you’ll get an intense wah effect. If you rock the
pedal within a limited range like _ inch, you’ll get a subtle effect.

POWER

Single 9 volt alkaline battery or Dunlop ECB03 AC Adapter

CONTROLS

• Pedal sweeps 100K ohm Hot Potz potentiometer for quick wah ramping

• Effect On/Bypass toggle switch at bottom of pedal travel