Dunlop FFM2 User manual

®

92503014462revB

FFM2 GERMANIUM MINI DISTORTION

FFM2 GERMANIUM FUZZ FACE®

MINI DISTORTION

DESCRIPTION

• Legendary Fuzz Face tone with
pedalboard-friendly size, AC
power and on/bypass status LED

• Based on ’66-’68 era pre-silicon
Fuzz Face pedals

• Warm vintage fuzz tones
provided by slightly mismatched
germanium transistors

• True bypass

CONTROLS

VOLUME knob controls overall

eect volume

FUZZ knob controls amount

of fuzz

FOOTSWITCH toggles on/

bypass (blue LED indicates on)

POWER

The FFM2 is powered by one
9-volt battery (open battery door

on underside of pedal to install),
a 9-volt AC adapter such as the
Dunlop ECB003/ECB003EU, or

a DC Brick™ power supply.

®

DIRECTIONS

• Run a cable from your guitar
to the FFM2’s INPUT jack and
another cable from the FFM2’s
OUTPUT jack to your amplier.

• Start with both controls at 12
o’clock.

• Turn the eect on by depressing
the footswitch.

• Rotate the VOLUME knob

clockwise to increase

overall eect volume or

counterclockwise to decrease it.

• Rotate the FUZZ knob clockwise
to increase amount of fuzz or

counterclockwise to decrease it.

SPECIFICATIONS

Input Impedance 10 kΩ

Output Impedance

Max Volume 2 kΩ

-6 dB Volume 115 kΩ

Max Gain 45 dB

Bypass True Hardwire
Current Draw 3.4 mA
Power Supply 9 volts DC

DUNLOP MANUFACTURING, INC.

P.O. BOX 846 BENICIA, CA 94510 U.S.A.

TEL: [phone] FAX: [phone]