Dunlop FFM1 User manual

®

92503014289revB

FFM1 SILICON MINI DISTORTION

FFM1 SILICON FUZZ FACE® MINI

DISTORTION

DESCRIPTION

• Legendary Fuzz Face tone with
pedalboard-friendly size, AC
power and on/bypass status LED

• Spec’d from our own prized 1970
Fuzz Face pedal

• Bright, aggressive sounding
BC108 transistors

• True bypass

CONTROLS

VOLUME knob controls overall

eect volume

FUZZ knob controls amount

of fuzz

FOOTSWITCH toggles on/

bypass (blue LED indicates on)

POWER

The FFM1 is powered by one
9-volt battery (open battery door
on underside of pedal to install),
a 9-volt AC adapter such as the
Dunlop ECB003/ECB003EU or
a DC Brick™ power supply.

®

DIRECTIONS

• Run a cable from your guitar
to the FFM1’s INPUT jack and
another cable from the FFM1’s
OUTPUT jack to your amplier.

• Start with both controls at 12
o’clock.

• Turn the eect on by depressing
the footswitch.

• Rotate the VOLUME knob
clockwise to increase
overall eect volume or
counterclockwise to decrease it.

• Rotate the FUZZ knob clockwise
to increase amount of fuzz or
counterclockwise to decrease it.

SPECIFICATIONS

Input Impedance 10 kΩ

Output Impedance
Max Volume <16 kΩ
Mid Volume 66 kΩ

Max Gain 55 dB

Bypass True Hardwire
Current Draw 3.4 mA
Power Supply 9 volts DC

DUNLOP MANUFACTURING, INC.

P.O. BOX 846 BENICIA, CA 94510 U.S.A.

TEL: [phone] FAX: [phone]