Page 1
SIETE
™
SANTOS
OCTAVIO
FUZZ
This pedal’s searing circuit is based on the Jimi Hendrix™ Octavio® Fuzz,
updated and dressed up sharply for the Bearded One, the Reverend, Mr.
Billy Gibbons. The Rev pairs his Octavio Fuzz, part of his sound ever since
Jimi Hendrix himself introduced him to it, with a 7-band EQ to sculpt and
refine the effect for his electrifying solos. We went ahead and built that
functionality right into his pedal, and we also added the modern convenience
of an AC power jack. Decked out in a custom color scheme with the “Pinstripe
Billy” design, this pedal makes a mighty fine addition to the board of any
player looking to borrow a little of Rev. Willie’s legendary magic.
BFG07
Page 2
External
Controls
1
2
3
4
1 FUZZ knob controls effect intensity
2 LEVEL knob controls overall output
3 GRAPHIC EQ sliders boost or cut indicated frequency (100–3.4K) up to ±18dB
4 FOOTSWITCH toggles effect on/bypass
BFG07 SIETE SANTOS OCTAVIO
2
Page 3
BASIC
OPERATION
POWER
The Siete Santos™ Octavio® Fuzz is powered by one 9-volt battery
(accessed via bottom of pedal), a 9-volt AC Adapter such as the Dunlop
ECB003/ECB003EU, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™
power supplies.
Directions
1. Run a cable from your guitar to
the BFG07’s INPUT jack and run another
cable from the BFG07’s OUTPUT jack
to your amplifier.
2. Start with FUZZ and LEVEL knobs
at 12 o’clock and GRAPHIC EQ sliders
set to 0dB.
3. Turn the effect on by depressing the
footswitch.
4. Rotate LEVEL knob clockwise
to increase overall effect volume
or counterclockwise to decrease it.
5. Move GRAPHIC EQ sliders up
to boost or down to cut indicated
frequency.
BFG07 SIETE SANTOS OCTAVIO
3
Page 4
Specifications
IMPEDANCE
INPUT IMPEDANCE 470 KΩ
OUTPUT IMPEDANCE 5 KΩ
CURRENT DRAW 17.5 mA
POWER SUPPLY 9 VDC
BFG07 SIETE SANTOS OCTAVIO
4
Loading...